Axial Locking, A Type
SSAC-V Series Low-Profile Square Rail
SSAC-C Series Low-Assembly Flange Slider
XR12 Series Motor Integrated Base
This page features the XR12 Series Motor Integrated Base, including a parts list, product structure diagrams (XR12-57 Series / XR12-60 Series), and a technical specifications table.

Axial Locking Nut Series A
The Axial Locking Nut Series A uses an axial locking method and has the same thickness as Series F. It is suitable for applications where design or assembly constraints prevent the use of other products. Made from 42CrMo or S45C, it has a hardness of HRC 28°–32° and an ISO 4H thread tolerance. Face runout is 0.002–0.005 mm for M12–M200 and 0.005–0.008 mm for M210–M300. A range of thread sizes is available, from M12×1.0 to M90×2.0, with outer diameters (D) from 30 mm to 120 mm and heights (h) from 14 mm to 26 mm. Each nut is supplied with locking screws, with maximum tightening torques ranging from 3.5 Nm to 18 Nm. These nuts are widely used to secure and preload precision bearings, helping ensure stable operation.

A-Series Axial Locking Nuts
A-series axial locking nuts provide axial positioning and secure fastening to prevent loosening. Suitable for fastening applications in mechanical assemblies.

Type A locknut
Type A locknuts use an axial three-point locking mechanism and have the same thickness as the F series. They are suitable for assemblies subject to special environmental constraints. Applications include machine-tool spindles, ball-screw support bearings, precision spindles, and precision measurement equipment. Materials include 42CrMo, 45# steel, or 40Cr. Thread tolerance class: ISO 4H; hardness: HRC 28°–32°; face runout: ≤0.005 mm. A range of thread sizes is available from M12×1.0 to M80×2.0. Outer diameter, thickness, number of slots, and other parameters vary by model.

KA Series Axial Locking Type A
KA Series precision locknuts feature an axial three-point locking design and have the same thickness as the F Series. They are suitable for applications with special assembly constraints. Typical uses include machine-tool spindles, ball-screw support bearings, precision spindles, and precision measuring instruments. Made from 42CrMo steel, they have a hardness of HRC 28–32, an ISO 4H thread tolerance, and face runout of ≤0.005 mm (≤0.002 mm for the precision-ground version). Available sizes include M70×1.5P, M70×2.0P, M72×1.5p, M72×2.0p, M75×1.5p, M75×2.0p, M78×1.5p, M80×2.0p, M85×2.0p, and M90×2.0p. Multiple outside diameters, thicknesses, inside diameters, and mounting-hole configurations are available. Maximum torque: 4.5 Nm. Custom non-standard locknuts are available.