Model · EL-S
EL-S Series Locking Assembly
The EL-S series is a thin-walled, single-taper locking assembly made of 45# steel with a polished surface. Its bolts can be installed directly on the hub. With a small difference between the inner and outer diameters and a thin wall, it is suitable for small hubs and especially well suited to aluminum pulleys. Product specifications cover various bore diameters (d = 10–30 mm), with corresponding permissible maximum torques (18–149 N·m), permissible axial loads (3.59–10.0 kN), shaft-side pressure, and hub bore pressure. Refer to the selection procedure to choose the type and specifications when placing an order.
Overview
The EL-S series is a thin-walled, single-taper locking assembly made of 45# steel with a polished surface. Its bolts can be installed directly on the hub. With a small difference between the inner and outer diameters and a thin wall, it is suitable for small hubs and especially well suited to aluminum pulleys. Product specifications cover various bore diameters (d = 10–30 mm), with corresponding permissible maximum torques (18–149 N·m), permissible axial loads (3.59–10.0 kN), shaft-side pressure, and hub bore pressure. Refer to the selection procedure to choose the type and specifications when placing an order.
Product Category: Power Transmission Components / Locking Assemblies
Models & specifications
| Model / Name | Material | Surface treatment |
|---|---|---|
| EL-S Thin-Walled Single-Taper Locking Assembly | 45#钢 | 光洁处理 |






