Model · ML-D Wedge-Type Locking Assembly

ML-D Wedge-Type Locking Assembly

The ML-D series wedge-type locking assembly (expansion sleeve) is made of 45# steel and can be finished with polishing, heat treatment, nickel plating, zinc plating, phosphating, and other surface treatments. Its high-strength design relies on frictional transmission. In the event of an overload, the assembly disengages, effectively protecting the equipment from damage. Locking assembly connections can withstand heavy loads, are available in designs for various load capacities, and support the use of multiple assemblies in series. Product parameters include an inner diameter d of 12–35 mm, shaft-side surface pressure, hub-side surface pressure, and the minimum outer diameter of the wheel. The assembly suits a range of shaft-and-bore fits and is widely used to connect shafts to hubs in mechanical transmission systems.

Overview

The ML-D series wedge-type locking assembly (expansion sleeve) is made of 45# steel and can be finished with polishing, heat treatment, nickel plating, zinc plating, phosphating, and other surface treatments. Its high-strength design relies on frictional transmission. In the event of an overload, the assembly disengages, effectively protecting the equipment from damage. Locking assembly connections can withstand heavy loads, are available in designs for various load capacities, and support the use of multiple assemblies in series. Product parameters include an inner diameter d of 12–35 mm, shaft-side surface pressure, hub-side surface pressure, and the minimum outer diameter of the wheel. The assembly suits a range of shaft-and-bore fits and is widely used to connect shafts to hubs in mechanical transmission systems.

Product category: Transmission Components / Locking Assemblies

Original catalogs

ML-D Wedge-Type Locking Assembly — Catalog page
ML-D Wedge-Type Locking Assembly — Catalog page