Model · EL-D Single-Taper Locking Assembly
EL-D Single-Taper Locking Assembly
The EL-D Single-Taper Locking Assembly consists of inner and outer tapered rings. Its compact, lightweight design makes it suitable for applications with limited installation space. It can replace various rigid or interference-fit connections. Multiple pairs of locking rings can be used to transmit higher loads, with up to 4 pairs compressed on one side or 8 pairs on both sides. It offers good concentricity. Made of 45 steel with a smooth surface finish, it is available in double-taper, tapered-tube, tapered-ring, and conical designs. Shaft diameters range from 45 to 440 mm, outer diameters from 52 to 460 mm, and lengths from 10 to 65 mm. It can transmit axial forces of 8.6–59.0 kN and torques of 143.3–2100.3 Nm. H7/H8 tolerances are recommended for the bore-to-shaft fit. Custom specifications are available.
Overview
The EL-D Single-Taper Locking Assembly consists of inner and outer tapered rings. Its compact, lightweight design makes it suitable for applications with limited installation space. It can replace various rigid or interference-fit connections. Multiple pairs of locking rings can be used to transmit higher loads, with up to 4 pairs compressed on one side or 8 pairs on both sides. It offers good concentricity. Made of 45 steel with a smooth surface finish, it is available in double-taper, tapered-tube, tapered-ring, and conical designs. Shaft diameters range from 45 to 440 mm, outer diameters from 52 to 460 mm, and lengths from 10 to 65 mm. It can transmit axial forces of 8.6–59.0 kN and torques of 143.3–2100.3 Nm. H7/H8 tolerances are recommended for the bore-to-shaft fit. Custom specifications are available.
Product category: Drive components / locking assemblies
Models & specifications
| Model / Name | Material | Surface treatment |
|---|---|---|
| EL-D Single-Taper Locking Assembly | 45#钢 | 光洁处理 |






