Model · AL-G Locking Assembly
AL-G Locking Assembly
The AL-G locking assembly features a straight-through, multi-taper design. It is made of 45# steel and finished with a smooth surface. Compared with the A4 type, all taper rings have the same taper, and a flange in the middle of the inner ring makes removal easier. Its longer contact surface and shallower taper make it suitable for transmitting heavy loads and for applications requiring high concentricity. Standard bore diameters range from 400 to 600 mm, outside diameters from 495 to 710 mm, and lengths from 158 to 190 mm. Custom specifications are available on request. The mating bore and shaft are manufactured to standard H7/H8 tolerances. This product is widely used for shaft–hub connections in mechanical power transmission and can replace comparable imported products.
Overview
The AL-G locking assembly features a straight-through, multi-taper design. It is made of 45# steel and finished with a smooth surface. Compared with the A4 type, all taper rings have the same taper, and a flange in the middle of the inner ring makes removal easier. Its longer contact surface and shallower taper make it suitable for transmitting heavy loads and for applications requiring high concentricity. Standard bore diameters range from 400 to 600 mm, outside diameters from 495 to 710 mm, and lengths from 158 to 190 mm. Custom specifications are available on request. The mating bore and shaft are manufactured to standard H7/H8 tolerances. This product is widely used for shaft–hub connections in mechanical power transmission and can replace comparable imported products.
Product category: Power transmission components / locking assemblies
Models & specifications
| Model / Name | Material | Surface treatment | Type |
|---|---|---|---|
| AL-G AL-G Locking Assembly | 45#钢 | 光洁处理 | 直通多锥 |






