Model · HTD Series Polyurethane Timing Belts (Open-Ended/Spliced)
HTD Series Polyurethane Timing Belts (Open-Ended/Spliced)
HTD series polyurethane timing belts feature a thermoplastic polyurethane body with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. The tooth surface and belt back can be covered with nylon fabric (green, black, or antistatic black) or left uncovered. Available tooth profiles are 5M and 8M. Standard widths range from 10 to 100 mm (5M: 10/15/20/25/30/50/100 mm; 8M also available in 85 mm). Belts are available in 100 m rolls or cut to specified lengths. They can also be thermally joined at the teeth to form endless splice belts (minimum splice length: 600 mm for 5M and 800 mm for 8M). These belts offer excellent wear and oil resistance and high tensile strength, and are suitable for both linear drives and curved-path transmission. Maximum allowable load varies with belt width and cord type (galvanized steel cords have approximately 1.5 times the strength of aramid cords, with elongation of 0.4% versus 0.8%). For curved paths, the minimum pulley tooth count is 16–22. This series is widely used in industrial automation for conveying, positioning, and similar applications.
Overview
HTD series polyurethane timing belts feature a thermoplastic polyurethane body with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. The tooth surface and belt back can be covered with nylon fabric (green, black, or antistatic black) or left uncovered. Available tooth profiles are 5M and 8M. Standard widths range from 10 to 100 mm (5M: 10/15/20/25/30/50/100 mm; 8M also available in 85 mm). Belts are available in 100 m rolls or cut to specified lengths. They can also be thermally joined at the teeth to form endless splice belts (minimum splice length: 600 mm for 5M and 800 mm for 8M). These belts offer excellent wear and oil resistance and high tensile strength, and are suitable for both linear drives and curved-path transmission. Maximum allowable load varies with belt width and cord type (galvanized steel cords have approximately 1.5 times the strength of aramid cords, with elongation of 0.4% versus 0.8%). For curved paths, the minimum pulley tooth count is 16–22. This series is widely used in industrial automation for conveying, positioning, and similar applications.
Product category: Drive components / Timing belts / Curvilinear tooth profile






