Model · HTD Series Polyurethane Timing Belts
HTD Series Polyurethane Timing Belts
HTD series polyurethane timing belts are available with 14M and 20M tooth profiles in open-ended and spliced versions. The belt body is made of thermoplastic polyurethane (92 Shore A). Cord options include galvanized steel and aramid. The tooth face and belt back can be left uncovered or covered with green or black nylon fabric, or antistatic black fabric. Standard widths for 14M belts are 25, 40, 55, 85, 100 and 115 mm; for 20M belts, they are 85, 100, 115 and 150 mm. Data is available for tooth shear strength, minimum bend radius and minimum number of teeth to be clamped when used with a clamping plate. The maximum tensile strength of a spliced belt is 50% of that of the belt body, and the minimum splice length is 900 mm. Suitable for motion paths including straight drives, reverse curves and curves with internal tension.
Overview
HTD series polyurethane timing belts are available with 14M and 20M tooth profiles in open-ended and spliced versions. The belt body is made of thermoplastic polyurethane (92 Shore A). Cord options include galvanized steel and aramid. The tooth face and belt back can be left uncovered or covered with green or black nylon fabric, or antistatic black fabric. Standard widths for 14M belts are 25, 40, 55, 85, 100 and 115 mm; for 20M belts, they are 85, 100, 115 and 150 mm. Data is available for tooth shear strength, minimum bend radius and minimum number of teeth to be clamped when used with a clamping plate. The maximum tensile strength of a spliced belt is 50% of that of the belt body, and the minimum splice length is 900 mm. Suitable for motion paths including straight drives, reverse curves and curves with internal tension.
Product category: Power Transmission Components / Timing Belts / Curvilinear Tooth Profile











