Model · LX Series Screw Chip Conveyor

LX Series Screw Chip Conveyor

The LX Series Screw Chip Conveyor consists of three parts: a geared motor, a screw assembly, and a housing. The geared motor rotates the screw assembly, and the resulting relative motion between the screw and housing carries chips axially through the housing. Its compact design takes up little space and is easy to install and use. With few transmission components and an extremely low failure rate, it is especially suitable for machine tools with limited chip-removal space, where other types of chip conveyors are difficult to install. Combined with other chip-removal systems, it can extend horizontal axial chip removal to accommodate different discharge directions and heights. The main components are made of stainless steel, offering an attractive, durable finish and effective conveying of short, chunky, and fragmented metal and non-metal chips. It is available in two basic types, I and II, depending on the screw design. Type I has a central shaft and a helical flight. Type II is suitable for long-distance conveying in dry machining and can also be used for wet machining with high coolant flow rates. Both types can be configured with multiple parallel shafts to increase chip-removal capacity. Type II is also available with a lifting section, overcoming the limitation of horizontal axial conveying only. Note: Do not use it to convey stringy chips, as these may wrap around the screw.

Overview

The LX Series Screw Chip Conveyor consists of three parts: a geared motor, a screw assembly, and a housing. The geared motor rotates the screw assembly, and the resulting relative motion between the screw and housing carries chips axially through the housing. Its compact design takes up little space and is easy to install and use. With few transmission components and an extremely low failure rate, it is especially suitable for machine tools with limited chip-removal space, where other types of chip conveyors are difficult to install. Combined with other chip-removal systems, it can extend horizontal axial chip removal to accommodate different discharge directions and heights. The main components are made of stainless steel, offering an attractive, durable finish and effective conveying of short, chunky, and fragmented metal and non-metal chips. It is available in two basic types, I and II, depending on the screw design. Type I has a central shaft and a helical flight. Type II is suitable for long-distance conveying in dry machining and can also be used for wet machining with high coolant flow rates. Both types can be configured with multiple parallel shafts to increase chip-removal capacity. Type II is also available with a lifting section, overcoming the limitation of horizontal axial conveying only. Note: Do not use it to convey stringy chips, as these may wrap around the screw.

Product category: Machine tool accessories / chip conveyors

Models & specifications

Model / NameCore diameter (mm)Maximum length (mm)Minimum length (mm)Minimum chip-removal capacityScrew diameter (mm)
LX72 LX72 Screw Chip Conveyor4050008005072
LX180 LX180 Screw Chip Conveyor5050008006080
LX1100 LX1100 Screw Chip Conveyor601000080070100
LX1150 LX1150 Screw Chip Conveyor901000080090150
LX1200 LX1200 Screw Chip Conveyor12010000800120200
LX1180 LX1180 Screw Chip Conveyor5020008006080
LX1120 LX1120 Screw Chip Conveyor70300080080120

Original catalogs

LX Series Screw Chip Conveyor — Catalog page
LX Series Screw Chip Conveyor — Catalog page