Model · AT Series Polyurethane Open-Ended Belt

AT Series Polyurethane Open-Ended Belt

The AT Series polyurethane open-ended belt (also suitable for splicing) is designed for synchronous drive and linear conveying applications. Made from polyurethane (PU), it is available in two standard pitches: AT10 and AT20. The belt has a length tolerance of ±0.5 mm/m and a thickness tolerance of ±0.4 mm. Available in white or black, it can be supplied with steel or Kevlar cords. The maximum width is 150 mm, and the standard length is 100 m. Optional features include fabric on the tooth side, fabric on the back, fabric on both sides, a rubber coating, and an integral guide, to meet different requirements for wear resistance, noise reduction, guidance, and installation.

Overview

The AT Series polyurethane open-ended belt (also suitable for splicing) is designed for synchronous drive and linear conveying applications. Made from polyurethane (PU), it is available in two standard pitches: AT10 and AT20. The belt has a length tolerance of ±0.5 mm/m and a thickness tolerance of ±0.4 mm. Available in white or black, it can be supplied with steel or Kevlar cords. The maximum width is 150 mm, and the standard length is 100 m. Optional features include fabric on the tooth side, fabric on the back, fabric on both sides, a rubber coating, and an integral guide, to meet different requirements for wear resistance, noise reduction, guidance, and installation.

Product category: Power Transmission Components / Timing Belts / Open-Ended Belts

Models & specifications

Model / NameLength tolerance mm per mmaterialMax width (mm)Pitch (mm)Standard length mThickness tolerance (mm)
AT10 AT10 Polyurethane Open-Ended Belt0.5聚氨酯150101000.4
AT20 AT20 Polyurethane Open-Ended Belt0.5聚氨酯150201000.4

Original catalogs

AT Series Polyurethane Open-Ended Belt — Catalog page
AT Series Polyurethane Open-Ended Belt — Catalog page