Model · Manual Positioning Stages
Manual Positioning Stages
FARAY manual positioning stages are designed for precise manual adjustment and positioning. Based on guide construction, they are available in crossed-roller, steel-rail ball, linear ball, and dovetail types. Crossed-roller guides consist of V-groove rails, roller cages, and cylindrical rollers. They support loads in multiple directions, offer high accuracy, and allow easy preload adjustment. Steel-rail ball guides are lightweight, move smoothly, and are suitable for light loads. Linear ball guides use Gothic-arch grooves and four-point contact for high rigidity and accuracy. Dovetail guides use sliding surface contact and offer long travel and rapid movement. Drive options include micrometer heads, precision screw assemblies, rack and pinion drives, and precision screws. Micrometer heads move 0.5mm/0.25mm per revolution and are suitable for precision adjustment at the 0.01mm level. Precision screw assemblies and precision screws move 0.5mm/0.25mm per revolution and are suitable for fine adjustment. Rack and pinion drives move approximately 17mm per revolution and are suitable for rapid adjustment but not precision positioning.
Overview
FARAY manual positioning stages are designed for precise manual adjustment and positioning. Based on guide construction, they are available in crossed-roller, steel-rail ball, linear ball, and dovetail types. Crossed-roller guides consist of V-groove rails, roller cages, and cylindrical rollers. They support loads in multiple directions, offer high accuracy, and allow easy preload adjustment. Steel-rail ball guides are lightweight, move smoothly, and are suitable for light loads. Linear ball guides use Gothic-arch grooves and four-point contact for high rigidity and accuracy. Dovetail guides use sliding surface contact and offer long travel and rapid movement. Drive options include micrometer heads, precision screw assemblies, rack and pinion drives, and precision screws. Micrometer heads move 0.5mm/0.25mm per revolution and are suitable for precision adjustment at the 0.01mm level. Precision screw assemblies and precision screws move 0.5mm/0.25mm per revolution and are suitable for fine adjustment. Rack and pinion drives move approximately 17mm per revolution and are suitable for rapid adjustment but not precision positioning.
Product category: Linear motion components/Positioning stages