Model · Locking Assemblies
Locking Assemblies
Locking assemblies are advanced mechanical components used to create keyless connections between hubs and shafts under heavy loads. Tightening high-strength bolts generates pressure and friction between the mating surfaces, making them widely suitable for power transmission. Their advantages include friction-based transmission without keyways that weaken connected components, relative movement or wear, resulting in high strength and a long service life. They are easy to remove by loosening the bolts and offer good interchangeability. Available in various designs, they can withstand multiple loads and be installed in series to suit the load. Installation requires no heating, cooling or pressurizing equipment; the bolts simply need to be tightened to the specified torque. Shaft and bore machining tolerances are less demanding than for interference fits, the hub position on the shaft can be easily adjusted, and components that are difficult to weld can also be connected. This series also includes common taper bush sizes, with models such as 1008, 1108, 1210, 1615, 2012, 2517, 3030, 3525, 4040, 5040 and 5050. Specifications range from 35–177.5mm in maximum outer diameter, 22.3–127mm in taper bush length and 10–57 N·m in tightening torque, accommodating a variety of shaft diameters and hub combinations.
Overview
Locking assemblies are advanced mechanical components used to create keyless connections between hubs and shafts under heavy loads. Tightening high-strength bolts generates pressure and friction between the mating surfaces, making them widely suitable for power transmission. Their advantages include friction-based transmission without keyways that weaken connected components, relative movement or wear, resulting in high strength and a long service life. They are easy to remove by loosening the bolts and offer good interchangeability. Available in various designs, they can withstand multiple loads and be installed in series to suit the load. Installation requires no heating, cooling or pressurizing equipment; the bolts simply need to be tightened to the specified torque. Shaft and bore machining tolerances are less demanding than for interference fits, the hub position on the shaft can be easily adjusted, and components that are difficult to weld can also be connected. This series also includes common taper bush sizes, with models such as 1008, 1108, 1210, 1615, 2012, 2517, 3030, 3525, 4040, 5040 and 5050. Specifications range from 35–177.5mm in maximum outer diameter, 22.3–127mm in taper bush length and 10–57 N·m in tightening torque, accommodating a variety of shaft diameters and hub combinations.
Product category: Power Transmission Components/Locking Assemblies
Models & specifications
| Model / Name | Length (mm) | Outer diameter (mm) | Torque (N·m) | Wrench number |
|---|---|---|---|---|
| 1008 Taper Bush 1008 | 22.3 | 35 | 57 | 3 |
| 1108 Taper Bush 1108 | 22.3 | 38 | 57 | 3 |
| 1210 Taper Bush 1210 | 25.4 | 47 | 20 | 5 |
| 1215 Taper Bush 1215 | 38.1 | 45 | 20 | 5 |
| 1310 Taper Bush 1310 | 25.4 | 51 | 20 | 5 |
| 1610 Taper Bush 1610 | 25.4 | 57 | 20 | 5 |
| 1615 Taper Bush 1615 | 38.1 | 57 | 20 | 5 |
| 2012 Taper Bush 2012 | 38.1 | 70 | 20 | 5 |
| 2517 Taper Bush 2517 | 38.4 | 85 | 20 | 5 |
| 2525 Taper Bush 2525 | 38.4 | 85 | 20 | 5 |
| 3020 Taper Bush 3020 | 38.4 | 85 | 20 | 5 |
| 3030 Taper Bush 3030 | 38.4 | 108 | 20 | 5 |
| 3525 Taper Bush 3525 | 63.5 | 127 | 10 | |
| 3535 Taper Bush 3535 | 89 | 127 | 10 | |
| 4030 Taper Bush 4030 | 76.2 | 146 | 12 | |
| 4040 Taper Bush 4040 | 101 | 146 | 12 | |
| 4535 Taper Bush 4535 | 89 | 162 | 14 | |
| 4545 Taper Bush 4545 | 114.3 | 162 | 14 | |
| 5040 Taper Bush 5040 | 101 | 177.5 | 14 | |
| 5050 Taper Bush 5050 | 127 | 177.5 | 14 |
