Model · TF

TF Series Precision Shaft

The TF series cylindrical linear guide shafts (precision shafts) are made from GCr15 or 45# high-carbon steel, with a hardness of HRC 62 (+2) (HRC 58 for 45# steel). The case-hardening depth is 0.8–2.5 mm, surface roughness is 0.8–1.6 S, straightness is 80 μm per 1,000 mm, and roundness is no greater than 3.0 μm (Rmax). Solid and hollow shafts are available. Solid shafts range from Φ3 to Φ80 (G6 tolerance); hollow shafts are available only in diameters over 12 mm. Custom shafts can also be made, such as versions with threaded holes for connection to support rails. Designed for use with a range of linear bearings, these shafts provide a high-precision, long-life linear motion solution.

Overview

The TF series cylindrical linear guide shafts (precision shafts) are made from GCr15 or 45# high-carbon steel, with a hardness of HRC 62 (+2) (HRC 58 for 45# steel). The case-hardening depth is 0.8–2.5 mm, surface roughness is 0.8–1.6 S, straightness is 80 μm per 1,000 mm, and roundness is no greater than 3.0 μm (Rmax). Solid and hollow shafts are available. Solid shafts range from Φ3 to Φ80 (G6 tolerance); hollow shafts are available only in diameters over 12 mm. Custom shafts can also be made, such as versions with threaded holes for connection to support rails. Designed for use with a range of linear bearings, these shafts provide a high-precision, long-life linear motion solution.

Product categories: Linear Motion Components / Linear Guides / Cylindrical Linear Guides / Precision Shafts

Original catalogs

TF Series Precision Shaft — Catalog page
TF Series Precision Shaft — Catalog page