Model · PM Series Straight Bulkhead Union
PM Series Straight Bulkhead Union
The PM series straight bulkhead union is a plastic push-to-connect pneumatic fitting used to secure and connect tubing through panels, partitions, or enclosure walls. The fitting body passes through a mounting hole and is secured to the panel with a locknut. Tubing pushes directly into the fittings at both ends for quick installation and removal. It is commonly used for through-panel pneumatic connections between cylinders, solenoid valves, air preparation components, and tubing circuits. The series comprises five models based on compatible tubing outside diameter: PM04, PM06, PM08, PM10, and PM12, with corresponding ΦD values of 4, 6, 8, 10, and 12 mm. The catalog table also specifies ΦD1 (outside diameter of the through-panel/threaded section) and overall and mounting dimensions such as L, L1, L2, M, and φ, making it easier to select a fitting based on panel thickness and mounting hole diameter. The same catalog page also lists related plastic push-to-connect fittings, including PLM bulkhead threaded fittings, PZ plastic four-way fittings, and PE plastic equal tees. These are separate series; the PM series covers only straight bulkhead unions. Selection is primarily based on three parameters: tubing outside diameter ΦD, mounting hole size, and bulkhead thread specification.
Overview
The PM series straight bulkhead union is a plastic push-to-connect pneumatic fitting used to secure and connect tubing through panels, partitions, or enclosure walls. The fitting body passes through a mounting hole and is secured to the panel with a locknut. Tubing pushes directly into the fittings at both ends for quick installation and removal. It is commonly used for through-panel pneumatic connections between cylinders, solenoid valves, air preparation components, and tubing circuits. The series comprises five models based on compatible tubing outside diameter: PM04, PM06, PM08, PM10, and PM12, with corresponding ΦD values of 4, 6, 8, 10, and 12 mm. The catalog table also specifies ΦD1 (outside diameter of the through-panel/threaded section) and overall and mounting dimensions such as L, L1, L2, M, and φ, making it easier to select a fitting based on panel thickness and mounting hole diameter. The same catalog page also lists related plastic push-to-connect fittings, including PLM bulkhead threaded fittings, PZ plastic four-way fittings, and PE plastic equal tees. These are separate series; the PM series covers only straight bulkhead unions. Selection is primarily based on three parameters: tubing outside diameter ΦD, mounting hole size, and bulkhead thread specification.
Product category: Pneumatic components/Pneumatic fittings/Plastic push-to-connect fittings
Models & specifications
| Model / Name | D1 (mm) | Tube od (mm) |
|---|---|---|
| PM04 PM04 straight bulkhead union for Φ4 tubing | 10 | 4 |
| PM06 PM06 straight bulkhead union for Φ6 tubing | 13.5 | 6 |
| PM08 PM08 straight bulkhead union for Φ8 tubing | 15 | 8 |
| PM10 PM10 straight bulkhead union for Φ10 tubing | 19 | 10 |
| PM12 PM12 straight bulkhead union for Φ12 tubing | 21.5 | 12 |



