Model · ACK Series Swing Clamp Cylinder
ACK Series Swing Clamp Cylinder
The ACK series swing clamp cylinder is a pneumatic actuator that uses a guide mechanism to convert the piston's linear motion into a 90° or 180° rotation followed by a downward clamping motion. It is commonly used for workpiece clamping, turning, and positioning. The model designation consists of the ACK series code, rotation direction (L for left / R for right), bore size, and rotation angle, as in ACK-L-25-90. The rotation direction determines how the clamp arm swings in and out and should be selected to suit the fixture layout. Rotation angles are available in 90° (right-angle swing-in) or 180° (opposite-side swing-in). Common bore sizes include Φ25, Φ32, Φ40, and Φ50; larger bores provide greater output torque and clamping force. A magnet can be fitted on request for position detection using a magnetic switch. Various mounting accessories are available for installation on fixture plates. When selecting a model, calculate the required clamping torque based on the workpiece mass and clamp arm overhang, and allow sufficient clearance for rotation to prevent interference with surrounding fixtures.
Overview
The ACK series swing clamp cylinder is a pneumatic actuator that uses a guide mechanism to convert the piston's linear motion into a 90° or 180° rotation followed by a downward clamping motion. It is commonly used for workpiece clamping, turning, and positioning. The model designation consists of the ACK series code, rotation direction (L for left / R for right), bore size, and rotation angle, as in ACK-L-25-90. The rotation direction determines how the clamp arm swings in and out and should be selected to suit the fixture layout. Rotation angles are available in 90° (right-angle swing-in) or 180° (opposite-side swing-in). Common bore sizes include Φ25, Φ32, Φ40, and Φ50; larger bores provide greater output torque and clamping force. A magnet can be fitted on request for position detection using a magnetic switch. Various mounting accessories are available for installation on fixture plates. When selecting a model, calculate the required clamping torque based on the workpiece mass and clamp arm overhang, and allow sufficient clearance for rotation to prevent interference with surrounding fixtures.
Product category: Pneumatic components/Swing clamp cylinders
Models & specifications
| Model / Name | Bore (mm) | Rotation angle deg | Rotation direction |
|---|---|---|---|
| ACK-L-25-90 ACK Series Swing Clamp Cylinder, Left Rotation, Φ25, 90° | 25 | 90 | L |


