Model · LEG Series Non-Interchangeable Linear Guides
LEG Series Non-Interchangeable Linear Guides
The LEG series consists of non-interchangeable linear guides. The blocks and rails are machined and matched as sets, providing high assembly accuracy; if damaged, the entire set must be replaced. Blocks are available in flanged (W) and square (H) types, in four sizes: 15, 20, 25 and 30. Load types are heavy load (C) and medium load (S). Block mounting options are top mounting (A) and bottom mounting (B). Special block machining is also available (E; no code indicates no special machining). Accuracy grades are normal (C), high (H), precision (P), super precision (SP) and ultra precision (UP). Assembly accuracy is controlled by the permissible dimensional errors in height H and width N, as well as the differences in height and width between matched blocks. Running parallelism of block surfaces C/D relative to rail surfaces A/B is also specified in ranges according to rail length (0~4000 mm). Multiple blocks can be assembled on a single rail. Model numbers follow the sequence: block type-size-load type-mounting method-special block machining-number of blocks-rail type-rail length-special rail machining-surface treatment-accuracy grade-dust protection accessories.
Overview
The LEG series consists of non-interchangeable linear guides. The blocks and rails are machined and matched as sets, providing high assembly accuracy; if damaged, the entire set must be replaced. Blocks are available in flanged (W) and square (H) types, in four sizes: 15, 20, 25 and 30. Load types are heavy load (C) and medium load (S). Block mounting options are top mounting (A) and bottom mounting (B). Special block machining is also available (E; no code indicates no special machining). Accuracy grades are normal (C), high (H), precision (P), super precision (SP) and ultra precision (UP). Assembly accuracy is controlled by the permissible dimensional errors in height H and width N, as well as the differences in height and width between matched blocks. Running parallelism of block surfaces C/D relative to rail surfaces A/B is also specified in ranges according to rail length (0~4000 mm). Multiple blocks can be assembled on a single rail. Model numbers follow the sequence: block type-size-load type-mounting method-special block machining-number of blocks-rail type-rail length-special rail machining-surface treatment-accuracy grade-dust protection accessories.
Product category: Linear motion components/Linear guides
