Model · Set collar, set-screw type

Set collar, set-screw type

This series of split set collars is secured with set screws and is suitable for positioning at shaft ends or providing axial stops. A range of materials and finishes is available to suit different operating environments, including the standard type (black-oxide-finished S45C), wide type, nickel-plated type, SUS304 type, and aluminum alloy type. Order codes consist of a series prefix, inner diameter D, and width B. For example, ZSCCN12-10 denotes a standard type with a 12 mm inner diameter and 10 mm width. Based on the table data, inner diameters range from 7 to 53 mm and widths from 3 to 18 mm. These collars are widely used in mechanical drives and automation equipment.

Overview

This series of split set collars is secured with set screws and is suitable for positioning at shaft ends or providing axial stops. A range of materials and finishes is available to suit different operating environments, including the standard type (black-oxide-finished S45C), wide type, nickel-plated type, SUS304 type, and aluminum alloy type. Order codes consist of a series prefix, inner diameter D, and width B. For example, ZSCCN12-10 denotes a standard type with a 12 mm inner diameter and 10 mm width. Based on the table data, inner diameters range from 7 to 53 mm and widths from 3 to 18 mm. These collars are widely used in mechanical drives and automation equipment.

Product category: Mechanical standard parts / Set collars

Models & specifications

Model / NameInner diameter (mm)materialSurface treatmentWidth (mm)
ZSCCN12-10 Standard set collar, 12 mm inner diameter, 10 mm wide12S45C发黑10

Original catalogs

Set collar, set-screw type — Catalog page
Set collar, set-screw type — Catalog page