Model · HTD20M Polyurethane Timing Belt
HTD20M Polyurethane Timing Belt
The HTD20M polyurethane timing belt is available in open-ended or spliced form. Its body is made of thermoplastic polyurethane (92 Shore A), with galvanized steel wire or aramid cord available as the tensile member. It has a 20M curvilinear tooth profile and comes in standard widths of 85, 100, 115, and 150 mm. The corresponding maximum allowable loads (with galvanized steel wire) are 21,250, 25,000, 28,750, and 37,500 N. The tooth face and belt back are available without covering, or with green nylon fabric, black nylon fabric, or antistatic black fabric. Tooth shear strength varies with speed: 150 N/10 mm at 0 rpm and 60 N/10 mm at 3,000 rpm. The minimum number of teeth in the clamp is 6. Minimum pulley tooth counts for different bend configurations are: 32 for a straight drive, 36 for a reverse bend, and 32 for an inside tension bend. The maximum tensile strength of a spliced belt is 50% of the belt body’s strength, and the minimum splice length is 900 mm. Suitable for power transmission and conveying equipment.
Overview
The HTD20M polyurethane timing belt is available in open-ended or spliced form. Its body is made of thermoplastic polyurethane (92 Shore A), with galvanized steel wire or aramid cord available as the tensile member. It has a 20M curvilinear tooth profile and comes in standard widths of 85, 100, 115, and 150 mm. The corresponding maximum allowable loads (with galvanized steel wire) are 21,250, 25,000, 28,750, and 37,500 N. The tooth face and belt back are available without covering, or with green nylon fabric, black nylon fabric, or antistatic black fabric. Tooth shear strength varies with speed: 150 N/10 mm at 0 rpm and 60 N/10 mm at 3,000 rpm. The minimum number of teeth in the clamp is 6. Minimum pulley tooth counts for different bend configurations are: 32 for a straight drive, 36 for a reverse bend, and 32 for an inside tension bend. The maximum tensile strength of a spliced belt is 50% of the belt body’s strength, and the minimum splice length is 900 mm. Suitable for power transmission and conveying equipment.
Product category: Power transmission components / Timing belts / Curvilinear tooth profile






