Model · HTD3M Series Polyurethane Timing Belt
HTD3M Series Polyurethane Timing Belt
The HTD3M series polyurethane timing belt is an open-ended belt that can be spliced into a loop. Made from thermoplastic polyurethane with a body hardness of 92 Shore A, it is available with galvanized steel or aramid cord reinforcement. The tooth surface can be covered with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 10, 15, 20, 25, 30, and 50 mm. The belt is 2.4 ± 0.2 mm thick, with a length tolerance of ±0.5 mm/m and a standard roll length of 100 m. It offers high abrasion resistance and tensile strength, and is suitable for both linear drives and curved transmission systems. The minimum pulley tooth count is 20. Spliced belts are joined at the teeth by welding to form a loop; the splice is the belt’s weakest point, and the minimum splice length is 600 mm. Widely used in conveying equipment and automated machinery.
Overview
The HTD3M series polyurethane timing belt is an open-ended belt that can be spliced into a loop. Made from thermoplastic polyurethane with a body hardness of 92 Shore A, it is available with galvanized steel or aramid cord reinforcement. The tooth surface can be covered with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 10, 15, 20, 25, 30, and 50 mm. The belt is 2.4 ± 0.2 mm thick, with a length tolerance of ±0.5 mm/m and a standard roll length of 100 m. It offers high abrasion resistance and tensile strength, and is suitable for both linear drives and curved transmission systems. The minimum pulley tooth count is 20. Spliced belts are joined at the teeth by welding to form a loop; the splice is the belt’s weakest point, and the minimum splice length is 600 mm. Widely used in conveying equipment and automated machinery.
Product Category: Power Transmission Components / Timing Belts / 3M


