Model · HTD8M Polyurethane Timing Belt
HTD8M Polyurethane Timing Belt
The HTD8M polyurethane timing belt is an open-ended belt designed for splicing. It is made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. The tooth side and belt back can be supplied bare, with green nylon fabric, black nylon fabric, or antistatic black fabric. It has an 8M curvilinear tooth profile, with standard widths of 10, 15, 20, 25, 30, 50, 85, and 100 mm; custom lengths are available on request. The belt offers high load capacity, with elongation under the maximum allowable load of 0.4% for galvanized steel cords and 0.8% for aramid cords. The spliced belt can be joined at the teeth by welding to form an endless belt. It is mainly used in conveyor equipment. Splice strength is 50% of the original belt strength, and the minimum splice length is 800 mm.
Overview
The HTD8M polyurethane timing belt is an open-ended belt designed for splicing. It is made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. The tooth side and belt back can be supplied bare, with green nylon fabric, black nylon fabric, or antistatic black fabric. It has an 8M curvilinear tooth profile, with standard widths of 10, 15, 20, 25, 30, 50, 85, and 100 mm; custom lengths are available on request. The belt offers high load capacity, with elongation under the maximum allowable load of 0.4% for galvanized steel cords and 0.8% for aramid cords. The spliced belt can be joined at the teeth by welding to form an endless belt. It is mainly used in conveyor equipment. Splice strength is 50% of the original belt strength, and the minimum splice length is 800 mm.
Product category: Power transmission components / Timing belts / Curvilinear tooth profile





