Model · P14M Polyurethane Timing Belt
P14M Polyurethane Timing Belt
P14M polyurethane timing belt with a P14M tooth profile, made from thermoplastic polyurethane with a belt body hardness of 92 Shore A. The tensile cords are available in galvanized steel wire or aramid cord. Standard widths are 40, 55, 85, 100, 115, and 150 mm. The belt is 10 ± 0.4 mm thick, with a length tolerance of ±0.8 mm/m and a standard roll length of 100 m. Custom colors (such as white or black) and tooth-side or belt-back coverings (nylon canvas or antistatic canvas) are available. Open-ended belts can be cut to length; spliceable belts can be welded into endless belts for conveying. After splicing, the maximum permissible load is 50% of the belt body’s load capacity. Tooth shear strength varies with speed, and the minimum number of teeth in mesh is 6. Bend requirements: for straight drives, the minimum pulley tooth count is 32; for reverse bends, the minimum pulley diameter is 250 mm. Maximum permissible load depends on belt width and tensile-cord material. Galvanized steel wire can support up to 228,000 N at a width of 150 mm; aramid cord has an elongation of 0.8%.
Overview
P14M polyurethane timing belt with a P14M tooth profile, made from thermoplastic polyurethane with a belt body hardness of 92 Shore A. The tensile cords are available in galvanized steel wire or aramid cord. Standard widths are 40, 55, 85, 100, 115, and 150 mm. The belt is 10 ± 0.4 mm thick, with a length tolerance of ±0.8 mm/m and a standard roll length of 100 m. Custom colors (such as white or black) and tooth-side or belt-back coverings (nylon canvas or antistatic canvas) are available. Open-ended belts can be cut to length; spliceable belts can be welded into endless belts for conveying. After splicing, the maximum permissible load is 50% of the belt body’s load capacity. Tooth shear strength varies with speed, and the minimum number of teeth in mesh is 6. Bend requirements: for straight drives, the minimum pulley tooth count is 32; for reverse bends, the minimum pulley diameter is 250 mm. Maximum permissible load depends on belt width and tensile-cord material. Galvanized steel wire can support up to 228,000 N at a width of 150 mm; aramid cord has an elongation of 0.8%.
Product category: Power transmission components / Timing belts / Curvilinear tooth profile





