Model · S3M Timing Belt
S3M Timing Belt
The S3M timing belt is a curvilinear-tooth timing belt (HTD/STPD type) with an S3M tooth profile and a pitch of 3.00mm. A common width code is 15, indicating a belt width of 15.00mm. The catalog uses a “pitch length-model” designation: for example, 396-S3M denotes an S3M timing belt with a pitch length of 396mm, with the belt width specified separately by a width code. These belts are primarily used in low-power precision drives, including office equipment, printers, small automation modules, 3D printers, packaging machinery, and textile machinery. They offer smooth, quiet operation, require no lubrication, and provide an accurate speed ratio and high positioning accuracy. The number of teeth is calculated from the pitch length and pitch. Common pitch lengths range from approximately 100~2500mm. Belt bodies are typically made of chloroprene rubber (CR) or polyurethane (PU), with fiberglass or aramid tensile cords. Select a belt based on the required pitch length, width, and tooth count. This page also includes a specification table for the S4.5M series (pitch 4.50mm), which is separate from the S3M series.
Overview
The S3M timing belt is a curvilinear-tooth timing belt (HTD/STPD type) with an S3M tooth profile and a pitch of 3.00mm. A common width code is 15, indicating a belt width of 15.00mm. The catalog uses a “pitch length-model” designation: for example, 396-S3M denotes an S3M timing belt with a pitch length of 396mm, with the belt width specified separately by a width code. These belts are primarily used in low-power precision drives, including office equipment, printers, small automation modules, 3D printers, packaging machinery, and textile machinery. They offer smooth, quiet operation, require no lubrication, and provide an accurate speed ratio and high positioning accuracy. The number of teeth is calculated from the pitch length and pitch. Common pitch lengths range from approximately 100~2500mm. Belt bodies are typically made of chloroprene rubber (CR) or polyurethane (PU), with fiberglass or aramid tensile cords. Select a belt based on the required pitch length, width, and tooth count. This page also includes a specification table for the S4.5M series (pitch 4.50mm), which is separate from the S3M series.
Product category: Power transmission components/Timing belts/Curvilinear-tooth timing belts
