Model · S5MA Polyurethane Timing Belt
S5MA Polyurethane Timing Belt
The S5MA polyurethane timing belt is available in open-ended or spliced versions. The belt body is made of thermoplastic polyurethane, with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. Nylon fabric (green, black, or antistatic black) can be added to the tooth side and belt back, or omitted. The tooth profile is S5MA, and the standard width is 25 mm. Maximum allowable load: 1,675 N for galvanized steel cords (0.4% elongation) and 1,718 N for aramid cords (0.8% elongation). Spliced belts are joined at the teeth by welding to form an endless loop and are used in conveying equipment. The minimum splice length is 600 mm, and the maximum tensile strength at the splice is 50% of the belt body strength.
Overview
The S5MA polyurethane timing belt is available in open-ended or spliced versions. The belt body is made of thermoplastic polyurethane, with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. Nylon fabric (green, black, or antistatic black) can be added to the tooth side and belt back, or omitted. The tooth profile is S5MA, and the standard width is 25 mm. Maximum allowable load: 1,675 N for galvanized steel cords (0.4% elongation) and 1,718 N for aramid cords (0.8% elongation). Spliced belts are joined at the teeth by welding to form an endless loop and are used in conveying equipment. The minimum splice length is 600 mm, and the maximum tensile strength at the splice is 50% of the belt body strength.
Product category: Power Transmission Components / Timing Belts / Curvilinear Tooth Profile











