How to select a hollow rotary table: Narrow down options step by step by size, load, speed, and accuracy

First, determine the installation dimensions and table requirements

First, note the required turntable diameter for the work surface, along with the platform’s outer diameter, center bore diameter, and thickness that the installation space can accommodate. List the load on the table as well and compare it with the load capacity of candidate platforms. If the dimensions or load do not match, eliminate that model before comparing drive and accuracy.

Calculate the drive configuration based on load and speed

Record the target speed and table load, calculate the required torque and inertia, then check whether the platform’s gear ratio and motor power suit the operating conditions. The JVT60 series can be paired with 50–100 W servo motors or 42/57 stepper motors, with gear ratios of 5, 10, 15, 20, 25, 35, and 50. The series has a rated output torque of 5 N·m and a maximum output torque 3 times the rated torque. When selecting a model, match the calculated requirements against the specifications of each option.

Match accuracy and speed requirements to a specific model

Evaluate the equipment’s accuracy requirements and target table speed against the corresponding parameters of candidate platforms. The JVT60 series specifications include positioning accuracy ≤1 arc-min and repeatability ≤15 arc-sec; the permitted table speed is 200 rpm (intermittent operation). The series uses crossed roller bearings, and product literature describes it as high-precision, highly rigid, and backlash-free, making it suitable for precision rotary positioning and indexing in automation equipment.

Choose the interface configuration based on motor type

After selecting the motor, confirm the platform’s motor compatibility and mounting interface. JVT60-K-5-H/8-30-46-M4 corresponds to a 100 W servo motor, JVT60-K-5-B1/5-22-31-M3 corresponds to a 42 stepper motor, and JVT60-K-5-B2/8-38.1-47.14-M4 corresponds to a 57 stepper motor. All the model examples above have a gear ratio of 5; their interface configurations should not be assumed to be universal for other motor models.

Product mentioned

JVT60 Series Hollow Rotary Table

Back to articles