How do you select a timing belt and timing pulleys? Narrow down the options step by step based on operating conditions, tooth profile, and transmission parameters

1. First, clarify the transmission requirements and installation conditions

Start by gathering the transmitted power, drive pulley speed, driven pulley speed or transmission ratio, installation center distance, and operating conditions of the equipment. These data form the basis for comparing timing belt and timing pulley specifications. If the speed or transmission ratio has not yet been determined, first clarify the equipment’s target operating conditions before narrowing down the dimensions.

2. Match the tooth profile and pitch first, then compare belt width and length

Timing belts are available with trapezoidal, curvilinear, and other tooth profiles, as well as different pitches. When selecting a belt and pulleys, first match the belt’s tooth profile and pitch to the pulley specifications, then compare belt width and length. Combinations with different tooth profiles or pitches should not be considered compatible simply because their overall dimensions are similar. The belt type and dimensions must meet the requirements of the application equipment.

3. Determine the transmission ratio from the tooth counts, then select specifications based on power and speed

Select the drive and driven pulley tooth counts based on the target transmission ratio, then compare pulley dimensions and timing belt width in relation to the transmitted power and speed. The power that a timing belt can transmit per unit of width varies with pitch and speed, so belt width should not be determined based only on motor power or a single speed. Use selection data for the relevant belt type and operating conditions.

4. Include belt length and actual center distance as selection parameters in the calculations

After the initial selection of tooth profile, pitch, tooth count, and other parameters, determine the timing belt pitch length and actual center distance, and use the selected parameters when ordering the belt and pulleys. Both should be included in transmission design calculations and selection; they should not be estimated based only on the pulley tooth count or available installation space.

5. Finally, select materials and specifications based on the environment and installation conditions

Also account for environmental factors such as operating temperature, humidity, and chemical exposure, as well as the pulley mounting method. These conditions affect the required material, surface treatment, and mounting specifications. Compare them alongside the transmission parameters established earlier to narrow down the options, then select a belt and pulley combination according to the relevant specifications.

Back to articles