First confirm whether you need to open or shut off a pipeline, or change the cylinder’s direction of travel
If the task is to open or shut off a pipeline, first look at 2/2-way solenoid valves. If you need to change the air supply direction between the two chambers of a cylinder, choose a valve based on its directional-control function. The 0927 series is a 2/2-way, normally closed, pilot-operated diaphragm solenoid valve designed for pipeline on/off control; it should not be selected as a cylinder directional-control valve.
Choose the valve body and design based on the medium
Record the actual medium flowing through the pipeline, then check the valve’s range of compatibility. The 0927 series has a stainless-steel body and is suitable for media such as water, oil, and gas. It features a pilot-operated diaphragm design. Confirm that the medium is within this range before selecting the port and electrical specifications.
Match the port thread to the pipeline
Determine the thread type based on the pipeline connections at the installation site. The 0927 series is available with G or NPT threads; G thread is the default, and the model code T indicates NPT thread. If the pipeline uses NPT, include T in the ordering code; for G thread, use the default thread.
Select the coil voltage to match the control power supply
Match the available power type and voltage to the coil specification. The 0927 series is available in AC220V (code A), AC110V (code B), and DC24V (code C). First confirm whether the installation uses AC or DC power and the exact voltage, then select the corresponding code. Do not substitute based only on a similar appearance or port connection.