How to choose a zero-point positioning system: first narrow down the options by lifting method and orientation requirements

Choose a model first by pallet-lifting method

Start by reviewing the equipment’s pallet-change process. If pneumatic pallet lifting is required, prioritize pneumatic pallet-lifting models such as HLQNC-S. If pallet lifting needs to be integrated into an automated process, look at automated pallet-lifting models such as HLQNCZ-S. Decide on this approach first, then compare the specific mounting styles; don’t mistake the two lifting methods for performance differences within the same configuration.

Choose a model with orientation when the workpiece must retain a fixed direction after changeover

If the pallet or workpiece must retain a specified orientation after changeover, choose a model with an orientation function. If this is not required, first consider the corresponding models without orientation. The HLQ series includes models with an orientation option, such as the automated flange shaft-face type with orientation, HLQNCDZ-2S.

Then choose a base plate according to the number of stations and pallet layout

Once you have chosen the locator type, check whether the fixture uses a single-station or multi-station layout. Base plate options include HQ series multi-station pallets and conversion plates, such as H2GWTP, H4GWTP, H6GWTP, and H8GWTP. The number of stations and pallet layout affect the choice of base plate.

Products mentioned

HLQ Short-Taper Ball-Lock Zero-Point Positioning

Back to articles