Swing Clamp Cylinder

030 Series Hydraulic Swing Clamp Cylinders

030 Series Hydraulic Swing Clamp Cylinders

This series of 030 hydraulic swing clamp cylinders features carbon steel bodies treated by carbonitriding for a hard, wear-resistant surface. No mounting holes need to be prepared in advance; the cylinders bolt directly to the worktable and are suitable for clamping thicker workpieces. Two types are available: single-acting models use a spring for retraction, providing a simple system, while double-acting models use hydraulic circuits to control clamping and release. The swing direction can be left or right. The standard swing angle is 90°, with custom angles of 30°, 45° and 60° available. Bore diameters range from Φ14 to Φ45, vertical strokes from 8 to 14 mm, and total strokes from 16.5 to 27.9 mm. Theoretical clamping force at 250 kg/cm² ranges from 180 to 1,960 kg. The operating pressure range is 35–250 kg/cm², and standard hydraulic oil is used. Models include 030LS/RS/LD/RD-22/52/92/121/202 to suit a range of fixture applications.

040 Series Swing Clamp Cylinder

040 Series Swing Clamp Cylinder

The 040 Series swing clamp cylinder features an externally threaded barrel for direct mounting on fixture plates. It is available in single-acting (spring return) and double-acting (hydraulic control for clamping and release) versions. Choose a right-hand (R) or left-hand (L) swing direction. Bore sizes range from Φ14 to Φ45 mm, vertical stroke from 8 to 14 mm, and total stroke from 16.5 to 27.9 mm. Theoretical clamping force is 180–1,960 kg at 250 kg/cm². The operating pressure range is 35–250 kg/cm². The standard swing angle is 90°; custom angles of 30°, 45°, and 60° are also available. The barrel is made of rotary steel and treated with carbonitriding for a hard, wear-resistant surface. Ideal for rapid clamping and release in a wide range of fixtures.

050 Series Hydraulic Swing Clamp Cylinder

050 Series Hydraulic Swing Clamp Cylinder

The 050 Series Hydraulic Swing Clamp Cylinder has a very low mounting height, making it suitable for applications with limited space. Its main body can be recessed below the worktable surface. Installation is simple and requires only three or four bolts. It is available in single-acting and double-acting versions. The single-acting version has a simple internal system with no unloading circuit and uses a spring for return; it can return without a load. On the double-acting version, clamping and release are controlled entirely by the hydraulic circuit, with the process controlled by switching the direction of the directional control valve. The cylinder body is made of carbon steel and treated by carbonitriding for high surface hardness and good wear resistance. The cylinder bore ranges from Φ14 to Φ45 mm, the vertical stroke from 8.1 to 14.0 mm, and the total stroke from 16.5 to 27.9 mm. The theoretical clamping force at 250 kg/cm² ranges from 173 to 1,830 kg. The operating pressure range is 35–250 kg/cm². The standard swing angle is 90°, with 30°, 45°, and 60° angles available on request. The 050 Series offers right-hand (R) and left-hand (L) rotation, single-acting (S) and double-acting (D) operation, and model sizes 22, 52, 92, 121, and 202.

HSL Hydraulic Swing Clamp Cylinder

HSL Hydraulic Swing Clamp Cylinder

The HSL series hydraulic swing clamp cylinder is suitable for dedicated machines and MC fixtures used in parts manufacturing, and can greatly improve production efficiency. During operation, the piston first moves downward while the clamping arm swings to the designed angle, then continues in a straight line to clamp the workpiece. The cylinder body is made of carbon steel for machine casting. Its inner wall is specially machined to a smooth finish for a long service life. Installing a flow control valve is recommended to prevent excessive speed. Do not clamp a workpiece during the swing stroke. If you need to extend the clamping arm, do not exceed 1.5 times its original length. A variety of mounting styles are available, including standard, MF, FA, TB, FAM, and FCM types. Bore diameters range from 25 to 63 mm, with stroke options including 24.5, 29.5, 33, 44.5, and 50 mm. Compact and reliable, this series is an ideal choice for automated clamping stations.

HNFS Series High-Pressure Swing Clamp Cylinder

HNFS Series High-Pressure Swing Clamp Cylinder

As the piston rod retracts, the clamp arm rotates; after clamping, the piston rod continues to retract linearly. Clockwise or counterclockwise rotation is available. The standard angle is 90°, with 30°, 45°, and 60° also available. The cylinder body is made of high-grade aluminum with a hardened surface.

HNSD Series Flanged Double Pipe

HNS/HNTS Series Swing Clamp Cylinders

HNS/HNTS Series Swing Clamp Cylinders

The HNS/HNTS series hydraulic cylinder clamping arms (swing clamps) are hydraulically driven swing-clamping units commonly used in automated clamping fixtures. Available bore sizes are 25, 32, 40, 50, and 63 mm, with single-arm and double-arm configurations. For a detailed list of mounting dimensions, see the catalog. Suitable for a wide range of hydraulic clamping systems.

HCT Series Top-Flange High-Speed Hydraulic Swing Clamp (Single-Acting)

HCT Series Top-Flange High-Speed Hydraulic Swing Clamp (Single-Acting)

The title indicates single-acting. The page diagram shows the direction of rotation and the clamped and released positions.

HNS Hydraulic Swing Clamp Cylinder

HNS Hydraulic Swing Clamp Cylinder

HNS Series hydraulic swing clamp cylinders are available in bore sizes from Φ25 to Φ63. The swing angle ranges from 0° to 90° (90° standard; 0°, 45°, 60° and 180° available as options). They are suitable for applications requiring high clamping force, such as machining, batch production and highly automated production lines. The cylinder body is made of carbon steel and features a double-acting design with flange mounting. Maximum pressure: 70 kg/cm²; normal operating pressure: 20–45 kg/cm². Two basic types are available: single-arm (HNS) and double-arm (HNSD), along with the HNTS and HNTSD variants (not available with a Φ63 bore). The theoretical clamping force ranges from 59 kg to 600 kg at 25 kg/cm². Use filtered standard hydraulic oil.

HNS Series Hydraulic Swing Clamp

HNS Series Hydraulic Swing Clamp

HNS Series hydraulic swing clamps are suitable for applications requiring high clamping force, such as clamping large workpieces or machining operations with high cutting forces. They are widely used in mass production and highly automated production lines. The cylinder body is made of carbon steel for strength and durability. Bore sizes range from Φ25 mm to Φ63 mm, with four subseries available: HNS (single-arm, flange-mounted), HNSD (double-arm, flange-mounted), HNTS (single-arm, special type), and HNTSD (double-arm, special type). Swing angles from 0° to 90° are available, with 90° as standard. Maximum pressure resistance is 70 kg/cm²; the typical operating pressure is 20–45 kg/cm². The design is double-acting with flange mounting. Piston rod diameters vary by bore size and are Φ18, Φ20, Φ20, Φ20, and Φ25 mm, respectively. Theoretical clamping force ranges from 59 kg to 600 kg at a pressure of 25 kg/cm². The ordering code consists of the series number, swing direction, cylinder bore, swing angle, and mounting type, allowing flexible model selection.

HNTS Series Hydraulic Swing Clamp Cylinders

HNTS Series Hydraulic Swing Clamp Cylinders

The HNTS Series Hydraulic Swing Clamp Cylinders comprise two subseries, HNTS and HNTSD. Bore sizes range from Φ25 to Φ50 (excluding Φ63), with a swing stroke of 12–14 mm and a clamping stroke of 14–15 mm. They use standard hydraulic oil and have a maximum pressure rating of 70 kg/cm² and an operating pressure of 20–45 kg/cm². The swing angle ranges from 0° to 180° (90° standard). These double-acting cylinders are flange-mounted and are suitable for applications requiring high clamping force, such as machining fixtures and automated production lines. The theoretical clamping force ranges from 59 to 600 kg at 25 kg/cm². Ordering code format: series - rotation direction - bore - swing angle - mounting style.

HNTSD Series Hydraulic Swing Clamp Cylinders

HNTSD Series Hydraulic Swing Clamp Cylinders

This oil-hydraulic swing clamp cylinder series comprises four subseries: HNS, HNSD, HNTS, and HNTSD. Bore sizes range from Φ25 to Φ63, swing strokes from 12 to 14 mm, and clamping strokes from 14 to 15 mm. The cylinders use standard hydraulic oil, have a maximum pressure rating of 70 kg/cm², and operate at 20–45 kg/cm². The standard swing angle is 90°, with 0°, 45°, 60°, and 180° options available. They feature a double-acting design and flange mounting, and come in single-arm (HNS, HNTS) and double-arm (HNSD, HNTSD) configurations. The theoretical clamping force ranges from 59 to 600 kg at 25 kg/cm², making them suitable for applications requiring high clamping force. They are widely used in mass production and automated machining. The ordering code consists of the series number, swing direction, bore size, swing angle, and mounting option G.

HNU Series Upper-Flange Manifold-Mounted Hydraulic Swing Clamp Cylinder

HNU Series Upper-Flange Manifold-Mounted Hydraulic Swing Clamp Cylinder

This series comprises HNU-type, upper-flange manifold-mounted hydraulic swing clamp cylinders, available in single-arm (HNU) and double-arm (HNUD) versions. Four bore sizes are available, from Φ32 to Φ63. The cylinders feature a double-acting design and a standard swing angle of 90°, with 0°, 45° and 60° options. The total stroke is the sum of the swing stroke and clamping stroke: 14 mm and 15 mm, respectively. The cylinder body is made of medium-carbon or carbon steel, with a specially machined inner wall for a smooth surface and long service life. Axial and side manifold-mounting options are available, eliminating piping for a neat, space-saving installation. The operating pressure range is 20–45 kg/cm² for swing clamp cylinders or 5–140 kg/cm² for thin-type cylinders. The operating temperature range is -10 to +60°C. Use filtered, standard hydraulic oil as the operating fluid. The theoretical clamping force is calculated according to the bore size and operating pressure, and can reach several hundred kilograms. The order code consists of the series designation, rotation direction, bore size and angle; for example, HNUD R-50x90°.

HNU / HNUD Hydraulic Swing Clamp Cylinder

HNU / HNUD Hydraulic Swing Clamp Cylinder

This series consists of double-acting hydraulic swing clamp cylinders with four bore sizes: Φ32, Φ40, Φ50, and Φ63. The standard swing angle is 90°, with 0°, 45°, and 60° available as options. The total stroke consists of the swing stroke and the clamping stroke. Clamping arms are available in single-arm and double-arm configurations. The cylinder body is made of medium-carbon steel. Clamp arm extensions must not exceed 1.5 times the original length. The operating pressure range is 20–45 kg/cm², and the maximum pressure resistance is 70 kg/cm². The cylinder can rotate to the right or left. The ordering code consists of the series number, rotation direction, bore size, and angle.

HPS High-Pressure Swing Clamp Cylinder

HPS High-Pressure Swing Clamp Cylinder

The HPS Series High-Pressure Swing Clamp Cylinder keeps the area clear for loading and unloading workpieces while providing high-pressure clamping. The hydraulic cylinder clamps downward and has a swing stroke (do not clamp the workpiece during this stroke) followed by a vertical clamping stroke. This product uses German-made oil seals and imported components. The cylinder bore is specially machined to provide a smooth surface, ensuring reliable performance and long service life. Available bore diameters are 25, 40, 50, and 63 mm. The swing stroke is 7–12 mm, the vertical stroke is 11–15 mm, the maximum oil filling speed is 3.2–27.7 cc/s, and the minimum operating pressure is 40 kg/cm². Choose a clockwise right-hand swing (R) or a counterclockwise left-hand swing (L); the standard swing angle is 90°. Mounting options include fully threaded type A, base type B (piped), and manifold type C. Operating modes are single-acting (S) and double-acting (D).

HNFT High-Pressure Swing Clamp Cylinder

HNFT High-Pressure Swing Clamp Cylinder

The HNFT Series High-Pressure Swing Clamp Cylinder is made of premium carbon steel with a hardened surface. The standard swing angle is 90°, with custom angles of 30°, 45°, and 60° available. Clamping is achieved by rotating left or right and then pressing vertically downward. Cylinder bore sizes are 25 mm, 32 mm, and 40 mm. Two operating types are available: single-acting (Type A) and double-acting (Type B). The theoretical clamping force ranges from 420 kg to 1,600 kg at a pressure of 250 kg/cm². Use clean, filtered hydraulic oil. The operating temperature range is -10 to +60°C, and the pressure range is 70 to 210 kg/cm². Installing a flow control valve at the oil inlet is recommended to control the swing speed. Suitable for automated clamping applications.

HNDT High-Pressure Swing Clamp Cylinder

HNDT High-Pressure Swing Clamp Cylinder

The HNDT series high-pressure swing clamp cylinder clamps by rotating and then pressing vertically downward. The standard rotation angle is 90°; angles of 30°, 45° and 60° are available by custom order. Made of high-grade carbon steel with a hardened surface. When the clamp arm is extended, the G value exceeds 1.2 times that of the original specification. Install a flow control valve before use to control the swing speed. Available in single-acting or double-acting versions. Use filtered hydraulic oil. Operating temperature: -10 to +60°C; pressure range: 70–210 kg/cm². Choose clockwise rotation (R) or counterclockwise rotation (L). Cylinder bore sizes are 25 mm, 32 mm and 40 mm. Piping options are pipe-connected (blank) and manifold-mounted (F).

HCTU Series Rotary Clamp Cylinders

HCTU Series Rotary Clamp Cylinders

The HCTU series comprises top-flange, high-speed, double-acting hydraulic rotary clamp cylinders. A Gothic-arch cam groove and three-point steel-ball support mechanism ensure smooth, high-speed rotation and long service life. At a hydraulic pressure of 7 MPa, cylinder force ranges from 2.4 kN (HCTU01) to 25.8 kN (HCTU25), while clamping force ranges from 2.0 kN to 21.2 kN. Clamping arm lengths range from 30 to 90 mm. Options include a double-ended rod (E), a top pin (P), and rotation angles of 30°, 45°, or 60° (N30/N45/N60). The rotation direction can be left (L) or right (R). Piping options include differential-pressure piping or G-thread piping. The clamping arm is supplied by the user; HCTH series clamping arms are available for use with these cylinders.

HCTT Up-Flange-Mounted High-Speed Hydraulic Swing Clamp Cylinder (Single-Acting)

HCTT Up-Flange-Mounted High-Speed Hydraulic Swing Clamp Cylinder (Single-Acting)

The HCTT series is a high-speed, up-flange-mounted hydraulic swing clamp cylinder (single-acting). It features a Gothic cam groove and a three-point ball support mechanism. The balls make broad contact with the cam groove, effectively reducing contact pressure and enabling continuous, high-frequency, high-speed rotation with excellent durability. Seven sizes are available, from HCTT01 to HCTT25. At 7 MPa, cylinder force ranges from 2.0 to 20.5 kN, clamping force from 1.7 to 16.8 kN, and standard clamp arm length from 30 to 90 mm. Choose from rotation angles of 30°, 45°, or 60°. The rotation direction is clockwise during clamping. The model code indicates size, rotation direction, and special features. Variants include standard angle A, specified angles N30/N45/N60, and a locating-pin option P. Suitable for automated fixture systems requiring fast, frequent clamping.

HBTU Series Rotary Clamp Cylinder

HBTU Series Rotary Clamp Cylinder

The HBTU Series square-body, high-speed hydraulic rotary clamp cylinder features a Gothic cam groove and a three-point steel-ball support mechanism for smooth, high-speed rotation and excellent durability. Its large-diameter camshaft offers high rigidity, enabling stable high-speed rotation without an overload protection mechanism. Two connection options are available: G-thread piping and face-seal piping. The clamp arm is easy to position and replace using the locating pin slot. A flow control valve (model HVCF) can be added to adjust the operating speed independently, enabling convenient sequential or synchronized control. The square cylinder body is compact and requires no spacer blocks. Six sizes are available, from HBTU02 to HBTU25, with cylinder forces at 7 MPa ranging from 2.8 to 25.8 kN and clamping forces from 2.4 to 21.2 kN. Clamp arm lengths range from 35 to 90 mm, cylinder bore diameters from 29 to 82 mm, rod diameters from 18 to 36 mm, and effective areas from 10 to 23 cm². Ideal for automated production lines requiring high-speed rotary clamping.

HND5 Series Swing Clamp Cylinder

HND5 Series Swing Clamp Cylinder

The HND5 Series is a high-pressure swing clamp cylinder that secures workpieces by rotating and then pressing down vertically. The standard swing angle is 90°, with 30°, 45°, and 60° options available on request. Made from high-quality carbon steel with a hardened surface, the cylinders are available with bore diameters of 25 mm, 32 mm, or 40 mm. Choose single-acting (Type A) or double-acting (Type B) operation. The theoretical clamping force is 420–1,600 kg at 250 kg/cm². The operating pressure range is 70–210 kg/cm², and the temperature range is -10 to 60°C. Install a flow control valve at the oil inlet to regulate the swing speed. This series is suitable for fixtures, automation equipment, and other applications requiring highly reliable clamping.

HNF5 Series

HNF5 Series

This series of high-pressure swing clamps secures workpieces by rotating left or right and then pressing down vertically. The standard rotation angle is 90°; 30°, 45° and 60° angles are available on request. The cylinder body is made of high-grade carbon steel with a hardened surface. Three cylinder bore sizes are available: 25 mm, 32 mm and 40 mm, with either single-acting (Type A) or double-acting (Type B) operation. Type A has a swing stroke of 12 mm and a vertical stroke of 11 mm; Type B has a swing stroke of 15 mm and a vertical stroke of 18 mm. The theoretical clamping force at 250 kg/cm² is 420–1,450 kg for Type A and 495–1,600 kg for Type B. The operating pressure range is 70–210 kg/cm², and the operating temperature range is -10 to +60°C. Connections are available as piped or manifold-mounted (square-base models only). The rotation direction can be clockwise (R) or counterclockwise (L).

HNT5 Hydraulic Swing Clamp Cylinder

HNT5 Hydraulic Swing Clamp Cylinder

This series comprises HNT5 threaded hydraulic swing clamp cylinders in four bore sizes, from Φ32 to Φ63, and features double-acting operation. The standard swing angle is 90°, with 0°, 45° and 60° options available. Total cylinder stroke is the sum of the swing stroke and clamping stroke: 14 mm and 15 mm, respectively. Clamping arms are available in single-arm and double-arm configurations; this table lists dimensions for the single-arm version (HNT5) only. The cylinder body is made of medium-carbon steel. The operating fluid is hydraulic oil. The operating pressure range is 20–45 kg/cm², with a maximum pressure resistance of 70 kg/cm². Theoretical clamping force ranges from 125 kg to 600 kg, depending on the bore size. The model designation is HNT5-bore size; for example, HNT5-25 corresponds to a 32 mm bore.