Model · HNDT High-Pressure Swing Clamp Cylinder
HNDT High-Pressure Swing Clamp Cylinder
The HNDT series high-pressure swing clamp cylinder clamps by rotating and then pressing vertically downward. The standard rotation angle is 90°; angles of 30°, 45° and 60° are available by custom order. Made of high-grade carbon steel with a hardened surface. When the clamp arm is extended, the G value exceeds 1.2 times that of the original specification. Install a flow control valve before use to control the swing speed. Available in single-acting or double-acting versions. Use filtered hydraulic oil. Operating temperature: -10 to +60°C; pressure range: 70–210 kg/cm². Choose clockwise rotation (R) or counterclockwise rotation (L). Cylinder bore sizes are 25 mm, 32 mm and 40 mm. Piping options are pipe-connected (blank) and manifold-mounted (F).
Overview
The HNDT series high-pressure swing clamp cylinder clamps by rotating and then pressing vertically downward. The standard rotation angle is 90°; angles of 30°, 45° and 60° are available by custom order. Made of high-grade carbon steel with a hardened surface. When the clamp arm is extended, the G value exceeds 1.2 times that of the original specification. Install a flow control valve before use to control the swing speed. Available in single-acting or double-acting versions. Use filtered hydraulic oil. Operating temperature: -10 to +60°C; pressure range: 70–210 kg/cm². Choose clockwise rotation (R) or counterclockwise rotation (L). Cylinder bore sizes are 25 mm, 32 mm and 40 mm. Piping options are pipe-connected (blank) and manifold-mounted (F).
Product category: Hydraulic Components / Swing Clamp Cylinder
