Jaw Coupling

BF3 Series Flexible Couplings

BF3 Series Flexible Couplings

BF3 series split-type jaw couplings feature aluminum alloy hubs and a polyurethane elastomer spider, with fully separated hubs for easy installation and removal. The couplings are available with elastomers in three different hardnesses and colors to absorb vibration and compensate for radial and angular misalignment. They have no backlash at low torque and function as flexible couplings at high torque. Their clockwise and counterclockwise rotational characteristics are identical. They are oil-resistant and electrically insulating. Bore diameters range from 4–40 mm, outside diameters from 12–80 mm, lengths from 22–114 mm, rated torque from 1.5–110 N·m, and maximum speed from 3,000–6,500 rpm. Custom bores and keyways are available on request.

GAFN-GBFN Series Single/Double-Flange Couplings

GAFN-GBFN Series Single/Double-Flange Couplings

The hubs are made of 45# steel. Zero backlash, suitable for forward and reverse rotation. The elastomer is made of polyurethane, offering good wear resistance, oil resistance, and electrical insulation. The intermediate elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy. Secured with clamping screws.

DPG23-24 Series Split Jaw Coupling

DPG23-24 Series Split Jaw Coupling

Description: Simple construction, compact radial dimensions, light weight, and low moment of inertia make this coupling suitable for medium- and high-speed applications. It provides substantial axial, radial, and angular compensation. The polyurethane elastic element is wear- and oil-resistant. The coupling requires no lubrication and little maintenance, and can operate continuously over long periods. Listed applications include metallurgy, mining, petroleum, chemicals, lifting, transportation, light industry and textiles, water pumps, and fans.

DGFN Series with Brake Disc, Type DGFN

DGFN Series with Brake Disc, Type DGFN

The DGFN shaft coupling with brake disc is designed for use with disc brakes. The brake disc and elastomer can be replaced while installed. The brake disc must be mounted on the shaft end with the greatest moment of inertia. The maximum torque must not exceed the coupling’s maximum torque. Finished bore tolerances conform to ISO H7.

LMT Series Jaw Flexible Coupling

LMT Series Jaw Flexible Coupling

The LMT Series jaw coupling uses a flexible intermediate spider to absorb vibration and compensate for radial, angular, and axial misalignment. It is oil-resistant and electrically insulating, with identical clockwise and counterclockwise rotation characteristics. Available with elastomers in three hardness grades and secured with clamping screws. Made from high-strength aluminum alloy with an anodized finish. Models range from 14 mm to 105 mm in outer diameter and 22 mm to 615 mm in length. Custom bore sizes are available to meet special operating requirements.

DF Series Jaw Coupling

DF Series Jaw Coupling

The DF Series jaw coupling features a high-strength aluminum alloy body and a polyurethane elastomer insert, offering excellent wear resistance, oil resistance, and electrical insulation. Its zero-backlash design is suitable for operation in both directions and compensates for radial, angular, and axial misalignment. The removable design makes installation easy, and set screws secure the coupling in place. Models are designated by outer diameter and length (for example, DF-20×30). Outer diameters range from 14 to 965 mm, with lengths varying accordingly. A range of standard sizes is available to meet different power transmission requirements.

DLZ Aluminum Alloy Expansion-Sleeve Jaw Coupling

DLZ Aluminum Alloy Expansion-Sleeve Jaw Coupling

The DLZ series aluminum alloy expansion-sleeve jaw coupling is designed for spindle applications requiring high speeds and high torque transmission. Its expansion-sleeve design provides a secure connection between the shaft and hub, while zero backlash makes it suitable for bidirectional rotation. The polyurethane elastomer offers good wear resistance, oil resistance, and electrical insulation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Its removable design makes installation easy. The hubs are made of high-strength aluminum alloy with an anodized finish. Bore holes are machined to standard H7/H8 tolerances, and custom specifications are available. A range of models and sizes is offered, with rated torque from 45 to 105 N·m and maximum torque from 90 to over 200 N·m, depending on the model, to accommodate different shaft diameters.

JFG Series Jaw Couplings

JFG Series Jaw Couplings

JFG series jaw couplings feature high-strength aluminum alloy hubs and a polyurethane spider, offering excellent wear resistance, oil resistance, and electrical insulation. The zero-backlash design is suitable for operation in both directions. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy. The surface is anodized, and the coupling is secured with clamping screws.

DLZG-45# Steel Expansion-Sleeve Jaw Coupling

DLZG-45# Steel Expansion-Sleeve Jaw Coupling

The DLZG-45# steel expansion-sleeve jaw coupling is designed for spindle applications requiring high-speed, high-torque transmission. Its expansion-sleeve design ensures a secure connection between the shaft and hub with zero rotational clearance, and supports both forward and reverse rotation. The polyurethane elastomer is wear-resistant, oil-resistant, and electrically insulating. It absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy. Made of 45# steel with a blackened surface finish, it is supplied with set screws. Standard models include DLZG-55×78, DLZG-65×90, DLZG-80×114, DLZG-95×126, and DLZG-105×140. Custom, non-standard models are also available.

GKM Type

GKM Type

The GKM-type jaw coupling features a double-section design with a three-piece, double-section construction. Its hubs are made of 45# steel, and its elastomer is made of polyurethane. It dampens vibration, reduces noise, and provides zero rotational backlash, making it suitable for forward and reverse rotation. It absorbs vibration, compensates for radial, angular, and axial misalignment, and extends the service life of adjacent components. A wide range of finished bore diameters is available (from 6 mm to 200 mm), with multiple sizes to choose from. Bore tolerances are H7/H8, and custom specifications are available. Product parameters include rated torque, dimensions (DH, E, S, b, LGKM, etc.), and misalignment compensation capacity.

DFG Stainless Steel Spider Coupling Series with Set Screws

DFG Stainless Steel Spider Coupling Series with Set Screws

DFG stainless steel spider couplings with set screws feature hubs made of SUS304 stainless steel for excellent corrosion resistance. The polyurethane elastomer is wear-resistant, oil-resistant, and electrically insulating. The zero-backlash design is suitable for applications requiring rotation in both directions. It absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy, and set screws secure the coupling. Custom bore sizes are available, with H7/H8 tolerances supported. A range of outer diameters and lengths is available to suit different torque and speed requirements.

DFCG Series Jaw Couplings

DFCG Series Jaw Couplings

DFCG series stainless steel jaw couplings feature hubs made from SUS304 or 316 stainless steel for excellent corrosion resistance. The polyurethane elastomer spider is wear-resistant, oil-resistant, and electrically insulating. It absorbs vibration and compensates for radial, angular, and axial misalignment. Zero rotational backlash makes these couplings suitable for reversing applications. The removable design allows for easy installation, and the hubs are secured with set screws. A range of sizes is available, with outside diameters from 20 mm to 65 mm, lengths from 30 mm to 90 mm, and multiple bore sizes with H7/H8 tolerances. Rated torque: 4.2–164 N·m; permissible eccentricity: 0.02 mm; angular misalignment: 1°; axial misalignment: ±0.60 mm; speed: 6,000–17,000 RPM. Suitable for precision drive systems such as servo and stepper motor applications.

DPG Series Jaw Couplings

DPG Series Jaw Couplings

DPG Series Jaw Couplings use high-strength polyurethane flexible elements that are wear- and oil-resistant, offer high load capacity, and provide a long service life. Their simple design features compact radial dimensions, low weight, and low moment of inertia, making them suitable for medium- and high-speed applications. They provide substantial axial, radial, and angular misalignment compensation, require no lubrication, and need little maintenance. The split design makes installation and removal easy. Standard surface treatments are generally used; custom designs and special materials are available. These couplings are widely used in metallurgy, mining, petroleum, chemical processing, lifting, transportation, textiles and other light industries, as well as in water pumps and fans.

DFS-45# Steel Jaw-Type Set-Screw Coupling

DFS-45# Steel Jaw-Type Set-Screw Coupling

The DFS-45# steel jaw-type set-screw coupling features 45# steel hubs and a polyurethane elastomer, with zero rotational backlash and suitability for bidirectional rotation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Its detachable design makes installation easy, and it is secured with set screws. The coupling has a simple structure, compact radial dimensions, low weight, and low rotational inertia, making it suitable for medium- to high-speed applications. The elastic element is wear- and oil-resistant, offers high load capacity and a long service life, and requires no lubrication. It is widely used in metallurgy, mining, petroleum, chemicals, lifting, transportation, light industry, textiles, water pumps, fans, and other industries.

DFCS 45 Steel Jaw-Type Clamping Series

DFCS 45 Steel Jaw-Type Clamping Series

DFCS 45 steel jaw-type clamping series couplings feature hubs made from 45 steel and zero backlash, making them suitable for forward and reverse rotation. The polyurethane elastomer offers excellent wear resistance, oil resistance, and electrical insulation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy, and the coupling is secured with clamping screws. Product specifications: Model DFCS-30×40; material: 45 steel; surface finish: blackened; included hardware: cylindrical-head screws. Custom designs and special materials are available on request.

DGFN Type with Brake Disc

DGFN Type with Brake Disc

The DGFN-type coupling with brake disc belongs to the steel jaw-type clamping coupling series. It features grade 45 steel hubs and a polyurethane elastomer, with zero backlash, making it suitable for reversible drives. The elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Secured with clamping screws, its detachable design makes installation easy. The standard surface finish is black oxide. Custom designs and special materials are available to meet the needs of demanding operating conditions.

NM Jaw Coupling

NM Jaw Coupling

The NM series jaw coupling is a flexible coupling consisting of two cast-iron jaw hubs and a natural-rubber spider. Made using precision casting, it offers safe, quiet operation and complies with GB9439. Maximum torque is 125 kg·m. It accommodates shaft diameters of 7–75 mm and motor power up to 60 HP/45 kW. Available in multiple sizes, it has an outer diameter of 50–270 mm, a rated torque range of 1.3–417 kg·m, and an applicable speed range of 4,000–13,500 rpm. A sample part number is “NM50×50×51.5-7×7.” Custom bore options include a keyway (K), hexagonal bore (F), square bore (S), or splined bore (H).

HRC Jaw Coupling

HRC Jaw Coupling

The HRC series is a jaw-type flexible coupling made from high-quality cast iron with a black oxide finish. It is fitted with a highly resilient rubber spider that provides excellent shock absorption and vibration resistance for reliable power transmission. These are standard, general-purpose components with assured quality. Example model code: HRC-23.5×65-10×10, where 23.5 is the outer diameter (mm), 65 is the length (mm), and 10×10 indicates the bore diameters at both ends (mm). A range of sizes is available, with outer diameters from approximately 23.5 mm to 280 mm and corresponding variations in length. Bores can be machined to H7/H8 tolerances, and custom non-standard bore profiles are also available, including keyways, hexagonal, square, and splined bores. Set screws are included as standard. Suitable for general mechanical power transmission, with cushioning and vibration-damping properties.

LM Jaw-Type Flexible Coupling

LM Jaw-Type Flexible Coupling

The LM Series Jaw-Type Flexible Coupling compensates for relative misalignment between two shafts and provides vibration damping and cushioning. It has a simple design, requires no lubrication, offers high load capacity, and is easy to maintain. Replacing the flexible element requires axial movement. It is suitable for coaxial drive shafts operating at medium speeds and transmitting medium torque, particularly where frequent starting and changes in rotation direction occur. It is not suitable for low-speed, heavy-load applications or locations with limited axial space where aligning the shafts after replacing the flexible element is difficult. The operating temperature range is -35°C to +80°C, and the nominal torque range is 16 N·m to 25,000 N·m. The coupling is made of No. 45 steel with a blackened surface finish and comes with set screws. Select a configuration based on the shaft bore diameter and length. The bore is machined to standard H7/H8 tolerances; custom specifications are available.

LM Series Jaw-Type Flexible Couplings

LM Series Jaw-Type Flexible Couplings

Jaw-type flexible couplings compensate for relative shaft misalignment and provide vibration damping and cushioning. They have a simple, lubrication-free design, high load capacity, and are easy to maintain. Replacing the elastomer requires axial movement. They are suitable for medium-speed, medium-torque drive systems with coaxial shafts, frequent starts, and frequent reversals, as well as components requiring high operational reliability. Operating temperature: -35°C to +80°C. Nominal torque range: 16 N·m to 25,000 N·m. Made of grade 45 steel with a blackened surface finish; supplied with set screws. The series includes models such as LM1, LM8, LM9, LM10, LM13, and LM14. Bore diameters can be freely combined, and keyways, splines, and other features can be added. Custom non-standard designs are available.

LMS Double-Flange Elastic Jaw Coupling

LMS Double-Flange Elastic Jaw Coupling

The LMS double-flange elastic jaw coupling has a simple structure, compact radial dimensions, low weight, and low rotational inertia, making it suitable for medium- and high-speed applications. It provides substantial axial, radial, and angular compensation. Its high-strength polyurethane elastic element is wear- and oil-resistant, offers high load capacity, and provides a long service life with safe, reliable operation. No lubrication is required, maintenance is minimal, and the coupling can run continuously for extended periods. The product range includes multiple sizes, from LMS1 to LMS12, with rated torques from 25 to 12,500 N·m, allowable speeds from 1,500 to 8,500 rpm, and bore diameters from 12 to 160 mm. Custom non-standard versions are available on request, including additional accessories such as keyways.