Model · LM Jaw-Type Flexible Coupling

LM Jaw-Type Flexible Coupling

The LM Series Jaw-Type Flexible Coupling compensates for relative misalignment between two shafts and provides vibration damping and cushioning. It has a simple design, requires no lubrication, offers high load capacity, and is easy to maintain. Replacing the flexible element requires axial movement. It is suitable for coaxial drive shafts operating at medium speeds and transmitting medium torque, particularly where frequent starting and changes in rotation direction occur. It is not suitable for low-speed, heavy-load applications or locations with limited axial space where aligning the shafts after replacing the flexible element is difficult. The operating temperature range is -35°C to +80°C, and the nominal torque range is 16 N·m to 25,000 N·m. The coupling is made of No. 45 steel with a blackened surface finish and comes with set screws. Select a configuration based on the shaft bore diameter and length. The bore is machined to standard H7/H8 tolerances; custom specifications are available.

Overview

The LM Series Jaw-Type Flexible Coupling compensates for relative misalignment between two shafts and provides vibration damping and cushioning. It has a simple design, requires no lubrication, offers high load capacity, and is easy to maintain. Replacing the flexible element requires axial movement. It is suitable for coaxial drive shafts operating at medium speeds and transmitting medium torque, particularly where frequent starting and changes in rotation direction occur. It is not suitable for low-speed, heavy-load applications or locations with limited axial space where aligning the shafts after replacing the flexible element is difficult. The operating temperature range is -35°C to +80°C, and the nominal torque range is 16 N·m to 25,000 N·m. The coupling is made of No. 45 steel with a blackened surface finish and comes with set screws. Select a configuration based on the shaft bore diameter and length. The bore is machined to standard H7/H8 tolerances; custom specifications are available.

Product category: Drive components / Couplings / Jaw couplings

LM Jaw-Type Flexible Coupling — Dimension drawing
LM Jaw-Type Flexible Coupling — Selection specifications
LM Jaw-Type Flexible Coupling — Selection specifications
LM Jaw-Type Flexible Coupling — Selection specifications
LM Jaw-Type Flexible Coupling — Selection specifications

Models & specifications

Model / NameWeight (kg)accessorymaterialSpeed (rpm)Surface treatmentTorque NmInertia kg m2
LM1 LM1 Jaw-Type Flexible Coupling紧定螺钉45#钢15300发黑25
LM8 LM8 Jaw-Type Flexible Coupling13.56紧定螺钉45#钢4500发黑11200.0468
LM9 LM9 Jaw-Type Flexible Coupling21.4紧定螺钉45#钢3800发黑18000.1041
LM10 LM10 Jaw-Type Flexible Coupling73.45紧定螺钉45#钢3300发黑28000.8205
LM13 LM13 Jaw-Type Flexible Coupling103.86紧定螺钉45#钢2100发黑112001.6718
LM14 LM14 Jaw-Type Flexible Coupling127.59紧定螺钉45#钢1900发黑125002.499

Dimensions & drawings

LM Jaw-Type Flexible Coupling — Dimension drawing
LM Jaw-Type Flexible Coupling — Dimension drawing

Original catalogs

LM Jaw-Type Flexible Coupling — Catalog page
LM Jaw-Type Flexible Coupling — Catalog page