Pneumatic Knocking Hammers

SK Series Pneumatic Impact Hammers

SK Series Pneumatic Impact Hammers

SK series pneumatic impact hammers, also known as air hammers, are pneumatic vibration devices that use compressed air to drive a hammer head in repeated impacts. Like K series pneumatic vibrators, they belong to the broader vibrator category. Models are designated by the series code SK followed by the port size code, and are available in four sizes: SK30, SK40, SK60 and SK80. Port codes 30, 40 and 60 correspond to a 1/4" threaded connection, while port code 80 corresponds to a larger 3/8" threaded connection. Larger port codes indicate a larger hammer body and greater impact energy. These hammers are commonly used on bins, hoppers, chutes and pipes to break up bridging, prevent blockages and promote material flow. Compressed air is switched on and off at timed intervals or as needed, causing the hammer head to strike the wall repeatedly and dislodge adhering or bridged powders and granular materials. They can also provide vibration assistance for molds, castings and conveying troughs. For installation, the hammer is secured to the surface to be struck using a flange or threaded base. Automatic control can be achieved with a two-position, three-way solenoid valve and air preparation components. To select a model, first determine the required impact force based on bin capacity, wall thickness and material flowability, then select the port code and connection size, and confirm that the air supply pressure and flow rate meet the requirements.

SK Series Pneumatic Knocker

SK Series Pneumatic Knocker

The SK Series pneumatic knocker uses compressed air to drive a reciprocating piston, producing impact and vibration. It offers high power, strong impact force, and quiet operation. Its nominal frequency is 43~146 impacts/minute, with an excitation force of 150~2039 N. Frequency and amplitude can be continuously adjusted through air pressure. The maximum operating temperature is 150℃, with custom 200℃ versions available. It is suitable for vibratory emptying, conveying, impact, and tapping applications involving bins, pipes, and hoppers, and can be controlled manually or electrically.