Strobe Controller

PM-S Series

PM-S Series

The PM-S Series strobe controller is designed to drive machine vision lighting. Features include an adjustable illumination pulse width of 000–200 us or 000–999 us; increases peak light output by over 400% and extends the light’s service life; provides a camera trigger port for precise image-capture synchronization; supports external and internal trigger modes (debug mode); and includes protection against output overloads and short circuits. Rated output voltage: 48 V. Maximum output power: 200 W. Available in 2-channel and 4-channel models.

PM-SF Series Flying-Capture Strobe Controller

PM-SF Series Flying-Capture Strobe Controller

The PM-SF Series flying-capture strobe controller is a light source controller designed for flying-capture machine vision applications. It features an adjustable illumination pulse width of 0–200 μs, boosting the light source’s instantaneous brightness by over 400% while effectively extending its service life. The controller supports both external and internal trigger modes and provides a camera trigger port to ensure synchronized image capture. It also includes protection against output overloads and short circuits. The product operates on an input voltage of 100–240 VAC and provides a regulated 48 V output, with a maximum peak current of 50 A and a power rating of 200 W. It supports RS232 and Ethernet communications and has a 12M-2B output port. The external trigger response delay is ≤5 μs, and the internal trigger period is 10–999 ms. It is suitable for a wide range of high-speed imaging and inspection applications.

P-SD Series Strobe Controller

P-SD Series Strobe Controller

The P-SD Series is a dedicated line-light strobe controller that can drive six 48 V light sources and provides strobe illumination times of 1–50 μs. It supports control via the front panel and Ethernet, and provides one external line-trigger synchronization signal, one frame-trigger output, and three camera-synchronization trigger outputs. Its trigger circuits use high-speed optocoupler isolation to deliver accurate, highly reliable trigger signals. Automatic overload and overtemperature protection is included, and the line-trigger frequency is below 100 kHz. Two input power specifications are available: 100–240 VAC and 180–240 VAC, with output power ratings of 1,000 W and 2,400 W, respectively. Output voltage is 48 V, and maximum total output current is 25 A (maximum 25 A per channel). The output connector is 16M-2B (1+2-). Remote control is via Ethernet. The external trigger interface is EDG3.81, the frame-trigger voltage is D5V–24V, and both the line-trigger and camera-trigger interfaces are RS-422. For indoor use only. Operating temperature: 0–40°C; humidity: 20–85% RH (non-condensing).

PM-S-48W200 Series Digital Light Source Controller

PM-S-48W200 Series Digital Light Source Controller

The PM-S-48W200 Series is a digital light source controller designed for industrial and machine vision lighting. It supports constant-voltage drive and pulse-width modulation (PWM) dimming, with an input voltage range of 100–240 VAC, an output power of 200 W, and an output voltage of 48 V. It is available with 2 or 4 output channels, with maximum instantaneous output currents of 50 A and 25 A, respectively. It supports external triggering (12–24 VDC, edge-triggered, with high-speed optocoupler isolation) and a trigger delay of ≤5 μs. The light-on pulse width is adjustable (0–200 μs for the 2-channel model and 0–999 μs for the 4-channel model), as is the internal trigger period (10–999 ms). It features a camera trigger output (12 VDC, 20 mA) and remote communication interfaces (RS-232 and Ethernet). The operating temperature is 0–40°C, and the unit uses forced-air cooling. It is widely used in applications such as automated inspection, positioning, and identification.