Model · P-SD

P-SD Series Strobe Controller

The P-SD Series is a dedicated line-light strobe controller that can drive six 48 V light sources and provides strobe illumination times of 1–50 μs. It supports control via the front panel and Ethernet, and provides one external line-trigger synchronization signal, one frame-trigger output, and three camera-synchronization trigger outputs. Its trigger circuits use high-speed optocoupler isolation to deliver accurate, highly reliable trigger signals. Automatic overload and overtemperature protection is included, and the line-trigger frequency is below 100 kHz. Two input power specifications are available: 100–240 VAC and 180–240 VAC, with output power ratings of 1,000 W and 2,400 W, respectively. Output voltage is 48 V, and maximum total output current is 25 A (maximum 25 A per channel). The output connector is 16M-2B (1+2-). Remote control is via Ethernet. The external trigger interface is EDG3.81, the frame-trigger voltage is D5V–24V, and both the line-trigger and camera-trigger interfaces are RS-422. For indoor use only. Operating temperature: 0–40°C; humidity: 20–85% RH (non-condensing).

Overview

The P-SD Series is a dedicated line-light strobe controller that can drive six 48 V light sources and provides strobe illumination times of 1–50 μs. It supports control via the front panel and Ethernet, and provides one external line-trigger synchronization signal, one frame-trigger output, and three camera-synchronization trigger outputs. Its trigger circuits use high-speed optocoupler isolation to deliver accurate, highly reliable trigger signals. Automatic overload and overtemperature protection is included, and the line-trigger frequency is below 100 kHz. Two input power specifications are available: 100–240 VAC and 180–240 VAC, with output power ratings of 1,000 W and 2,400 W, respectively. Output voltage is 48 V, and maximum total output current is 25 A (maximum 25 A per channel). The output connector is 16M-2B (1+2-). Remote control is via Ethernet. The external trigger interface is EDG3.81, the frame-trigger voltage is D5V–24V, and both the line-trigger and camera-trigger interfaces are RS-422. For indoor use only. Operating temperature: 0–40°C; humidity: 20–85% RH (non-condensing).

Product category: Sensors · Industrial Vision / Light Controllers / Strobe Controllers

Models & specifications

Model / NameCamera trigger interfaceControl interfaceExternal trigger interfaceFrame trigger voltage (V)Input frequency (Hz)Input voltage range (V)Line trigger interfaceOperating humidity max percentOperating humidity min percentOperating temperature max cOperating temperature min cOutput channel countOutput current max aOutput interfaceOutput power (W)Output voltage (V)Per channel current max a
P-SD-48W1000-6TS2 Line-Light Strobe Controller P-SD-48W1000-6TS2Rs422网口EDG3.815-2450/60100-240Rs422852040062516M-2B, 1+2-10004825
P-SD-48W2400-6T Line-Light Strobe Controller P-SD-48W2400-6TRs422网口EDG3.815-2450/60180-240Rs422852040062516M-2B, 1+2-24004825

Original catalogs

P-SD Series Strobe Controller — Catalog page
P-SD Series Strobe Controller — Catalog page
P-SD Series Strobe Controller — Catalog page
P-SD Series Strobe Controller — Catalog page