Light Source Controller

AX92353 Series 4-Channel Lighting Control Module
The AX92353 Series 4-Channel Lighting Control Module is an LED light source controller designed for machine vision inspection systems and must be used with the AX92352 encoder card. It provides four independent constant-current LED drivers, with a maximum output current of 1 A per channel. It supports both strobe and trigger modes. Light source brightness can be adjusted in software, and the duration and delay for each LED output can also be configured. This makes the module suitable for high-speed, precise lighting in area-scan and line-scan applications. Measuring 151 × 80 mm, its compact design makes it easy to integrate into industrial control systems. The dedicated LED power cable (4P 4.2/6P 4.2, 10 cm long) is compatible only with IPC962 and IPC964 industrial computers. The module is primarily used in automated applications such as AOI optical inspection, production-line defect detection, and robot vision guidance.
PM-HA Series High-Power Variable-Frequency Controller

PM-A Series Analog Controllers
This series of analog controllers provides stepless adjustment of light intensity through voltage control. Each channel supports a maximum output current of 1–2.5 A and delivers precise, highly reliable trigger signals. The controllers feature a built-in universal switching power supply with an AC 100–240 V input, offering stable operation, ease of use, convenience, and a fast response. Brightness can be adjusted using the front-panel dial. Selected models (with the S2 suffix) also support remote dimming via RS232. Models range from 24 W to 1,200 W, with 2- or 4-channel outputs to meet a variety of power requirements. Trigger delay is less than 1 ms. Output ports are available in two types: SMP-03V-BC and 12M-2B. These controllers are widely used in machine vision inspection, industrial automation, and other applications.

P-HA Series High-Power Analog Controller
The P-HA series high-power analog controllers feature a built-in 100–240 VAC universal switching power supply, power-off memory, short-circuit protection, and overload protection. Light brightness can be controlled from the front panel or via RS-232 serial communication. An external trigger port lets you switch the light on only when needed, extending its service life. The controllers use constant-voltage drive and offer 256-step dimming via front-panel buttons, with manual and RS-232 control. Two models are available: the single-channel P-HA-24W300-1T, with a maximum output of 300 W, and the dual-channel P-HA-24W600-2T, with a maximum output of 600 W. Input: AC 100–240 V, 50/60 Hz. Output: DC 24 V at 12.5 A. Trigger delay: ≤5 ms. External trigger voltage: DC 5–24 V. Overcurrent protection activates at more than 110% of the rated current and resets automatically. Operating temperature: 0–40°C; humidity: 20–85% RH. Forced-air cooling. RoHS compliant. Suitable for controlling industrial light sources in machine vision and other applications.

PM-D Series Digital Controller
The PM-D Series Digital Controller is a digital LED light source controller that supports both constant and strobe illumination. It uses constant-voltage drive and offers two dimming methods: panel buttons and RS232 serial communication, with 256 levels of fine brightness adjustment. Available in 2-, 4-, and 6-channel configurations, it covers total power ratings from 24 W to 200 W, with a maximum current of 3 A per channel. The external trigger features high-speed optocoupler isolation, with a trigger delay of less than 10 μs to ensure accurate, reliable signals. It includes overcurrent, overload, and short-circuit protection, and saves settings when power is lost. Compact and easy to operate, it is ideal for controlling LED light sources in machine vision, industrial inspection, and other applications.

P-MDPS Series Mini Digital Controller
This series of mini digital controllers controls the brightness of LED light sources and supports two control methods: manual buttons and RS232 serial communication. It provides four output channels, with a maximum output current of 3 A per channel and a total output power of 75 W. Three operating modes are supported: continuous, trigger, and strobe. Features include power-off memory and short-circuit protection. The external trigger voltage range is DC 5–24 V. Trigger delay is less than 8 μs in strobe mode and less than 25 μs in digital mode. The input and output voltages are both DC 24 V. The operating temperature range is 0–40°C, and the humidity range is 20–85% RH (non-condensing). A power adapter (BYX-2404000) is available as an option. Suitable for lighting control in machine vision, industrial inspection, and other applications.

PM-D-TE Series
The PM-D-TE Series is a plastic-housed Ethernet digital controller designed for machine vision lighting. It supports 4-, 6-, and 8-channel output, with power ratings of 60 W, 120 W, and 200 W. Features include power-loss memory, overload protection, and short-circuit protection. Brightness can be controlled in three ways: manual buttons, Ethernet communication, or the RS232 serial port. The external trigger uses high-speed optocoupler isolation and supports PNP/NPN triggering, with a trigger delay of less than 20 μs. The input voltage is AC 100–240 V, the output voltage is 24 V, and the maximum current per channel is 3 A. Suitable for applications such as automated inspection and vision positioning.

PM-C Series
The PM-C Series digital-display constant-current controllers are designed specifically for machine-vision LED light sources. They provide two or four 5 V output channels, with a maximum current of 0.7 A per channel. Manual settings and RS232 serial communication enable 256-level brightness adjustment. External triggering uses high-speed optocoupler isolation for reliable response, with trigger delays as low as ≤150 µs (2-channel models) or ≤20 µs (4-channel models). The wide input-voltage range is 100–240 VAC. Constant-current drive ensures stable light-source brightness. Suitable for a range of industrial vision inspection applications, including positioning, measurement, and identification.

P-AHC Series High-Power Constant-Current Controller
The P-AHC series high-power constant-current controller is designed to drive and control machine-vision light sources. It provides constant-current drive and supports 256-level dimming, either manually or via the control-panel buttons. Features include automatic detection of the light source’s rated current, power-off memory, short-circuit protection, and overload protection. The external trigger port supports NPN/PNP signals, with a trigger delay of ≤150 μs. Communication options include the control-panel buttons, an RS232 serial port, and an Ethernet port. Models feature a 48 V output, power ratings from 300 W to 800 W, and 1T or 2T channels. Operating temperature: 0–40°C; humidity: 20–85% RH (non-condensing). The controller uses forced-air cooling and complies with RoHS standards.

PM-S Series
The PM-S Series strobe controller is designed to drive machine vision lighting. Features include an adjustable illumination pulse width of 000–200 us or 000–999 us; increases peak light output by over 400% and extends the light’s service life; provides a camera trigger port for precise image-capture synchronization; supports external and internal trigger modes (debug mode); and includes protection against output overloads and short circuits. Rated output voltage: 48 V. Maximum output power: 200 W. Available in 2-channel and 4-channel models.

PM-SF Series Flying-Capture Strobe Controller
The PM-SF Series flying-capture strobe controller is a light source controller designed for flying-capture machine vision applications. It features an adjustable illumination pulse width of 0–200 μs, boosting the light source’s instantaneous brightness by over 400% while effectively extending its service life. The controller supports both external and internal trigger modes and provides a camera trigger port to ensure synchronized image capture. It also includes protection against output overloads and short circuits. The product operates on an input voltage of 100–240 VAC and provides a regulated 48 V output, with a maximum peak current of 50 A and a power rating of 200 W. It supports RS232 and Ethernet communications and has a 12M-2B output port. The external trigger response delay is ≤5 μs, and the internal trigger period is 10–999 ms. It is suitable for a wide range of high-speed imaging and inspection applications.

P-SD Series Strobe Controller
The P-SD Series is a dedicated line-light strobe controller that can drive six 48 V light sources and provides strobe illumination times of 1–50 μs. It supports control via the front panel and Ethernet, and provides one external line-trigger synchronization signal, one frame-trigger output, and three camera-synchronization trigger outputs. Its trigger circuits use high-speed optocoupler isolation to deliver accurate, highly reliable trigger signals. Automatic overload and overtemperature protection is included, and the line-trigger frequency is below 100 kHz. Two input power specifications are available: 100–240 VAC and 180–240 VAC, with output power ratings of 1,000 W and 2,400 W, respectively. Output voltage is 48 V, and maximum total output current is 25 A (maximum 25 A per channel). The output connector is 16M-2B (1+2-). Remote control is via Ethernet. The external trigger interface is EDG3.81, the frame-trigger voltage is D5V–24V, and both the line-trigger and camera-trigger interfaces are RS-422. For indoor use only. Operating temperature: 0–40°C; humidity: 20–85% RH (non-condensing).

PM-A-TS2 Series
The PM-A-TS2 Series analog controllers provide stepless adjustment of light intensity through voltage control. Each channel supports an output current of up to 3 A and provides accurate, highly reliable trigger signals. RS232 serial communication is supported. The series includes 4-channel and 2-channel models, with power ratings of 60 W, 120 W, and 200 W and a fixed output voltage of 24 V. The front panel features a brightness adjustment knob, a remote/local switch, a normally-off/normally-on mode selector, and indicator lights. Mounting clips are provided on the rear panel. These controllers are ideal for industrial vision applications that require stable, fast-responsive light source control.

PM-S-48W200 Series Digital Light Source Controller
The PM-S-48W200 Series is a digital light source controller designed for industrial and machine vision lighting. It supports constant-voltage drive and pulse-width modulation (PWM) dimming, with an input voltage range of 100–240 VAC, an output power of 200 W, and an output voltage of 48 V. It is available with 2 or 4 output channels, with maximum instantaneous output currents of 50 A and 25 A, respectively. It supports external triggering (12–24 VDC, edge-triggered, with high-speed optocoupler isolation) and a trigger delay of ≤5 μs. The light-on pulse width is adjustable (0–200 μs for the 2-channel model and 0–999 μs for the 4-channel model), as is the internal trigger period (10–999 ms). It features a camera trigger output (12 VDC, 20 mA) and remote communication interfaces (RS-232 and Ethernet). The operating temperature is 0–40°C, and the unit uses forced-air cooling. It is widely used in applications such as automated inspection, positioning, and identification.