Threaded Fittings — Page 2

TO-PL Right-Angle Threaded Fitting
The TO-PL series consists of right-angle threaded fittings (push-to-connect pneumatic fittings) for connecting air tubing to threaded ports at 90°. They accommodate tubing with an outside diameter of Φ4~Φ16mm and are available with thread sizes including M5, R1/8, R1/4, R3/8 and R1/2. Model numbers consist of the series code TO-PL, the tube outside diameter and the thread size code, as in TO-PL4-M5, TO-PL6-01, TO-PL8-02, TO-PL10-03 and TO-PL12-04. The main dimensions are designated by L1, L2, H, D, S and T: L1 is the overall fitting length, L2 is the threaded section length, H is the height at the thread base, D is the tube insertion bore diameter, S is the hex width across flats and T is the thread size. Designed for compressed air systems, these fittings are easy to install, provide a reliable seal and allow quick tube connection and disconnection. They are widely used in pneumatic circuits on automated equipment.

KQ2D Series Male Branch Tee Fittings
KQ2D Series male branch tee fittings are push-in pneumatic fittings that provide a tee connection between one male threaded port and two tubing ports in compressed air lines. They typically consist of a brass body with a nickel-plated finish, seals, and release rings. The fittings allow tubing to be connected and disconnected quickly and are easy to install, making them suitable for automated equipment, pneumatic control cabinets, and general industrial air lines. The catalog presents this series alongside KQ2LU offset tee fittings, but this page does not provide a complete model and dimension table for KQ2D. Refer to the relevant specification page for tubing diameters, thread sizes, and overall dimensions.

KQ2F Series Female Straight Fittings
The KQ2F series consists of pneumatic push-in female straight fittings suitable for nylon, polyurethane and other pneumatic tubing. Model numbers combine the applicable tube outside diameter and female thread size. Common tube diameters are 4, 6, 8 and 10 mm, and connection threads include M5×0.8, 1/8 and 1/2. Fitting dimensions are designated by A, L, S and Φ. The fittings connect directly to female-threaded ports, are easy to install and are suitable for pneumatic systems in automated equipment.

KQ2LU Series Male Run Tee Fittings
KQ2LU series male run tee fittings are pneumatic push-to-connect fittings used to connect tubing in a run tee configuration to a female-threaded port. The series is available for tubing outside diameters of 4, 8, and 10 mm, with thread sizes including M5×0.8, M6×1.0, 1/8, 1/4, 3/8, and 1/2. The model suffix S indicates that sealant is applied. The push-to-connect design makes installation easy, and the fittings are suitable for pneumatic piping systems in industrial automation. Select a model based on the tubing outside diameter and connection thread size, and check compatibility with the operating pressure, temperature, and medium. The catalog lists parameters such as hex size, overall dimensions, and mounting hole diameter for each specification to help with piping layout and installation.

KQ2V Series Single-End External Hex Fittings
The KQ2V series comprises single-end external hex push-in pneumatic fittings, a straight fitting type in the KQ2 push-in fitting family. One end has an external hex body for tightening with a wrench into a female threaded port; the other has a push-in connection. Once the tubing is inserted, internal gripping claws and an O-ring secure and seal it. Pressing the release ring allows the tubing to be removed quickly, without tools for connection or disconnection. These fittings are suitable for air lines in automation equipment and piping for cylinders and solenoid valves. The body and connection components are made of nickel-plated C3604 brass, providing good corrosion resistance and thread strength. The release ring is available in gray, blue or black, while the plastic parts are available in gray or black, allowing air lines to be color-coded. The series supports common tubing outside diameters of Φ4, Φ6, Φ8, Φ10 and Φ12, and the insertion length can be customized on request. The catalog page provides only the series title and material and color information, with no detailed specification table. Confirm the tubing outside diameter and mounting thread size when selecting a fitting.

KQ2VF Series Single-Ended Internal Hex Fittings
KQ2VF series single-ended internal hex fittings are KQ2 series push-to-connect pneumatic tube fittings. Their internal hex design allows installation from the end face using a hex key, making them suitable for confined spaces where access from the side is difficult. They provide quick connection and disconnection between pneumatic tubing and threaded ports. The tube connection section is made of C3604 brass. Release rings are available in gray, blue or black, and plastic bodies in gray or black. Insertion length can be customized to customer requirements. Compatible tube outside diameters include common sizes such as Φ4, Φ6, Φ8, Φ10 and Φ12. Related variants include single-ended external hex fittings (KQ2V), U-shaped push-to-connect fittings (KQ2U), reducing U-shaped fittings (KQ2X), extended U-shaped fittings (KQ2UW) and five-way copper tube fittings (KQ2XD). They are widely used in pneumatic circuit piping for automated equipment.

KQ2VS Series Single-End Internal Hex Fitting
The KQ2 series consists of push-to-connect fittings for pneumatic piping. The featured model is the KQ2VS single-end internal hex fitting. The range also includes the KQ2V single-end external hex fitting, KQ2VF single-end internal hex fitting, KQ2U U-shaped fitting, KQ2X reducing U-shaped fitting, KQ2UW extended U-shaped fitting, and KQ2XD five-way copper tube fitting. Compatible tubing outer diameters are Φ4, Φ6, Φ8, Φ10, and Φ12 mm. Key dimensions include fitting outer diameter Φ, fitting length L, mounting hole pitch B, and reducing tube outer diameter Φd. The insertion section is made of C3604 brass. Release rings are available in gray, blue, or black, while plastic parts are available in gray or black. Insertion length can be customized to customer requirements. To install, simply insert the tube until it locks; to remove it, press the release ring and pull out the tube. These fittings are widely used for quick piping connections in automation equipment, cylinders, and pneumatic systems.

PL45-G Series 45° Male Threaded Fittings
The PL45-G series consists of 45° male threaded pneumatic tube fittings with G threads, designed for installations where tubing must be routed at a 45° angle. They accommodate tube outside diameters of ΦD 4, 6, 8, 10, and 12 mm, with male thread sizes including G1/8, G1/4, G3/8, and G1/2. The catalog specifies overall lengths L1, L2, L3, and L4 and diameters ΦD1 and ΦD2 to help check clearances and select fittings for installation. Model numbers consist of PL45, a tube diameter code, and a G thread size code, such as PL45-04-G01, PL45-06-G04, and PL45-12-G04. These fittings connect pneumatic tubing of the corresponding outside diameter in automated equipment circuits. The material is not specified in the catalog.