Threaded Fittings

TO-PC Series Straight Male Threaded Fitting

TO-PLF Series Female Thread Elbow Fitting

PX-G Series Y-Type Threaded Elbow - G Thread

KQ2LF Series Female Threaded Elbow Fittings
Release ring colors: gray, blue, or black; plastic body colors: gray or black.

PLL-G Series Extended L-Type Threaded Elbow
The PLL-G series is an extended L-type (90°) male threaded elbow in the push-in pneumatic fitting range. The push-in tube end accepts PU or nylon tubing directly, while the threaded end has a G (PF) parallel pipe thread that mates with standard female threaded ports. Compared with a standard L-type elbow, it has a longer L2 overall length for routing tubing around obstacles or where a larger bend radius and greater reach are required. Compatible tube outside diameters φD are 4, 6, 8, 10, and 12 mm, with thread sizes G1/8, G1/4, G3/8, and G1/2. Key dimensions include L1 (thread engagement length), L2 (overall length), L3 (distance from the tube-end center to the threaded end face), φD1 (fitting body diameter), and φ (width across flats). The same page also lists metric thread variants PLL04-M5 and PLL04-M6, as well as similar models with R (PT) tapered pipe threads. Note that G and R threads are not interchangeable.

PD-G Series Male Branch Tee – G Thread

PX-N Series Y-Type Threaded Tee - NTP Thread
KN-PLF Series All-Brass Female Threaded Elbow Fitting

PL45 Series 45-Degree Threaded Elbow

PYG Series Reducing Fitting

CTF Series Pneumatic Threaded Fittings
The CTF series comprises straight threaded fittings for pneumatic lines. The catalog defines each size by four dimensions: L, L1, L2, and thread specification R. The series includes four models: CTF-G01, CTF-G02, CTF-G03, and CTF-G04, with overall lengths L of 34, 43, 49, and 63 mm, respectively, increasing with thread size. L1 measures 8.5, 11, 12, and 15 mm, while L2 measures 17, 21.5, 24.5, and 31.5 mm; both increase linearly with size. Thread sizes include R1/8, G1/4, G3/8, and G1/2. G01 has an R1/8 tapered pipe thread, while G02 and larger models have G-series parallel pipe threads. These fittings screw directly into matching female-threaded ports. Select the model code according to the line diameter and available installation space (overall length L and thread engagement length L1). They are suitable for directly connecting components to pipes in pneumatic lines.

PB Series Male Branch Tee
PB series male branch tees provide branch connections in pneumatic lines and are available in G thread (M5, M6, R1/8~R1/2) and NPT thread (NPT1/8~NPT1/2) versions. Compatible tube diameters range from Φ4~Φ14 mm and 5/32~1/2 inch. Body dimensions are defined by L1, L2, L3, ΦD1 and φ, making it easy to select a fitting by tube diameter and thread size. These standardized branch fittings are suitable for pneumatic piping in factory automation systems.

PL Series L-Type Threaded Elbow
The PL series L-type threaded elbow is a push-to-connect pneumatic fitting that connects air tubing to a threaded port at a 90° angle. It has a metal body and a push-in collet and accepts Φ4 and Φ6 metric tubing, as well as 5/32″, 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ inch tubing. Thread options include M5 and M6 metric threads and R1/8~R3/4 British tapered pipe threads; the PL-N variant uses NPT1/8~NPT1/2 American tapered pipe threads. The catalog lists all dimensions by ΦD, R, L1, L2, L3, ΦD1 and Φ1. These fittings are suitable for automation equipment, pneumatic circuits and industrial piping.

PL-N Series L-Shaped Threaded Elbow (NPT Thread)
The PL-N series consists of L-shaped (90°) threaded elbow pneumatic push-in fittings, with an inch-size push-in tube connection and an NPT tapered pipe thread. Six tube sizes are available: 5/32", 3/16", 1/4", 5/16", 3/8", and 1/2", with four thread sizes: NPT1/8, NPT1/4, NPT3/8, and NPT1/2. Model numbers follow the format “PL+tube diameter-N+thread code” (e.g., PL1/4-N02). The body is nickel-plated brass, and the threaded end is pre-coated with sealant for direct installation into a female NPT thread without additional thread seal tape. The L-shaped design routes tubing through a 90° turn to save installation space. The catalog provides dimensions including L1 (thread engagement depth), L2 (overall length), L3 (height across flats), ΦD1 (hex width across flats), and Φ1 (thread outside diameter) for selection and clearance checks. Suitable for compressed air, vacuum, water, and other non-corrosive media. Operating pressure: 0~1.0 MPa; operating temperature: -20~60℃.

PD-N Series Threaded Branch Tee - NPT Thread
The PD-N series is a threaded branch tee fitting with push-to-connect tube ends and a threaded branch for splitting and branching pneumatic lines. The catalog lists thread sizes including G1/8, G1/4, G3/8 and G1/2, as well as a separate NPT thread series in sizes including NPT1/8, NPT1/4, NPT3/8 and NPT1/2. Models are designated PDG-01, PDG-02, PDG-03 and so on according to connection size. Each designation covers multiple dimensional configurations, including thread length, center distance, overall length, outside diameter and hex across-flats size. These are listed row by row in the catalog's dimension table. Select the appropriate fitting based on the tube outside diameter and thread size. The body is generally made of nickel-plated brass or engineering plastic and is suitable for compressed air lines. Working pressure is typically selected according to standard pneumatic fitting ratings. To install, simply insert the tube and tighten the threaded end.

PLL Series Extended L-Shaped Threaded Elbow
The PLL series extended L-shaped threaded elbow is a push-in pneumatic fitting designed for right-angle connections between tubing and threaded ports. Body sizes include 04, 06, 08, 10, 12 and 15, accommodating tubing with outside diameters of 4, 6, 8, 10 and 12 mm. Thread sizes include M5, M6, G1/8, G1/4, G3/8, G1/2, R1/8, R1/4, R3/8 and R1/2. Mounting dimensions include L1, L2, L3, φD1 and φ to suit different space and flow requirements. Model numbers combine the body size and thread code, such as PLL04-M5 and PLL06-G01.

PL-G Series L-Shaped Threaded Tube Fittings
PL-G series L-shaped threaded tube fittings are push-to-connect pneumatic fittings for connecting tubing with outer diameters of 4, 6, 8, or 10 mm at a 90° angle to externally threaded pneumatic components. The push-lock mechanism seals the tube upon insertion; press the release ring to disconnect it. The listed models cover thread sizes G1/8, G1/4, G3/8, G1/2, and M5, with dimensions including L1, L2, L3, φD1, and φ provided for tubing layout and clearance checks. They are suitable for compact pneumatic connections in automated equipment, valve manifolds, cylinders, and fixtures.

PXT Series Y-Type Threaded Five-Way Fitting
The PXT series Y-type threaded five-way fitting provides branch connections in pneumatic piping, distributing air from one source to multiple actuators. It is available for tubing outside diameters including Φ4, Φ6 and Φ8 mm, with threaded connections including R1/8, R1/4, R3/8 and R1/2, as well as M5 and M6 on PXT-G variants. These options accommodate different combinations of tube diameters and threads. The catalog provides overall and mounting dimensions, including ΦD, R, L, L1, L2, L3, ΦD1, ΦD2 and Φ, to assist with selection and piping layout. Suitable for factory automation equipment, pneumatic fixtures and cylinder piping.

PXT-G Series Y-Type Threaded Five-Way Fitting
The PXT-G series Y-type threaded five-way fitting (G-thread type) is a pneumatic or fluid line connector with a Y-shaped flow passage. It connects to equipment ports using G threads (M5, M6, R1/8, R1/4, R3/8, R1/2). The series accommodates three tube diameters, ΦD 4, 6, and 8 mm, and is available with various port diameters (ΦD1 11.5~26.5 mm) and overall dimensions φ (10~20 mm). Key dimensions include L1 (3.5~13.5 mm), L2 (20~35 mm), and L3 (12.2~34 mm), allowing selection according to available installation space. PXT04-Gnn model codes distinguish the different tube diameter and thread combinations. There are 27 standard configurations for quick tubing connections in automated equipment, pneumatic actuators, and fluid circuits.

PL New Threaded Elbow
The PL series new threaded elbow (45-degree elbow) changes the direction of airflow in pneumatic lines. It uses G threads (G1/8, G1/4, G3/8, G1/2) and is compatible with tubing outside diameters of Φ4, Φ6, Φ8, Φ10 and Φ12. The product model consists of the base model PL45, a tube diameter code and a thread code. For example, PL45-04-G01 denotes a Φ4 tube diameter and a G1/8 thread. Key dimensions include L1, L2, L3, L4, ΦD1 and ΦD2; see the specification table for values. Suitable for automation equipment, pneumatic control systems and similar applications.

PL-G Series New Threaded Fittings with G Threads
PL-G series new threaded fittings with G threads provide threaded connections for pneumatic or fluid lines and are available in two body sizes: ΦD 4 mm and ΦD 6 mm. PL04 models cover G1/8, G1/4, and G3/8 threads, while PL06 models cover G1/8, G1/4, G3/8, and G1/2 threads. Multiple combinations of L1, L2, and L3 lengths and ΦD1 and ΦD2 dimensions accommodate different installation spaces and tubing requirements. Models are listed by code in the catalog; select the appropriate model by matching the thread size, body outside diameter, and overall dimensions.

PX Series Y-Type Threaded Tee
PX series Y-type threaded tees split or combine flow in pneumatic piping. Their Y-shaped design features a male threaded connection and accommodates various tubing diameters and thread sizes. The catalog covers the PX04, PX06, PX08, PX10 and PX12 series, with thread options including M5, M6, R1/8, R1/4, R3/8 and R1/2. It also lists overall and installation dimensions such as ΦD, L1, L2, L3, L4, ΦD1, ΦD2 and φ to help select the right fitting for available space and connection requirements.

PKD Series Threaded Five-Way Fittings
PKD series threaded five-way fittings distribute air from one inlet to multiple outlets in pneumatic lines and are suitable for tubing with outer diameters of Φ4 and Φ6. Available in 9 standard models, they feature M5 metric threads or R1/8, R1/4, R3/8, and R1/2 tapered pipe threads. Body dimensions include ΦD3 66~76.5 mm, ΦD4 42 mm, heights H1 22/26 mm and H2 13/14.5 mm, and lengths L1 3.2 mm, L2 19/20.5 mm, L3 9 mm, and L4 10 mm. To select a model, first choose size 04 or 06 according to the tubing outer diameter, then select connection code M5 or 01~04 according to the thread.

PMF Series Female Threaded Straight Bulkhead Fitting
The PMF series female threaded straight bulkhead fitting secures and connects pneumatic tubing as it passes through a panel or partition. One end has an Rc female tapered pipe thread, while the other has an M-threaded bulkhead mounting section. A locknut secures the fitting to a control cabinet, enclosure, or cylinder partition. It accommodates tubing with an outside diameter of Φ4~Φ12 mm. Rc thread sizes include Rc1/8, Rc1/4, Rc3/8, and Rc1/2, while bulkhead mounting thread sizes include M12×1, M14×1, M16×1, M20×1, and M22×1. Overall length L1 is 24~37 mm, and mounting outside diameter ΦD1 is 14~24 mm. The fittings are typically made of nickel-plated brass with nitrile rubber seals. They resist pressure and vibration, are easy to install and remove, and are widely used for through-panel pneumatic connections in pneumatic control systems, automation equipment, and electronic equipment.

PHF-G External Hex Fitting with G Thread
PHF-G series external hex fittings feature G threads (BSPP) and are designed for threaded pipe connections. Their hexagonal shape allows easy installation and removal with a wrench. They are suitable for connecting pipes and components in pneumatic, hydraulic, and cooling systems. Typically made of brass or nickel-plated brass, these fittings offer good corrosion resistance and sealing performance and can be used with media such as air, water, and oil. Select the appropriate fitting based on the thread size and pipe diameter.

PH Series Hex Fittings
PH Series hex fittings are threaded connectors for pneumatic piping. Their hexagonal body allows direct installation and tightening with a wrench. They connect air tubing to threaded ports or join two sections of piping. The catalog lists two thread variants in this series: PHF-G is an inline fitting with G threads, featuring G (parallel) threads at both ends to join two threaded ends; PH-N is a hex fitting with tapered NPT pipe threads for sealed connections to NPT-threaded ports. Select the appropriate variant based on thread specification (nominal G or NPT thread size), pipe diameter, and whether an inline configuration is required. For an airtight seal, wrap the male threads with PTFE tape or apply thread sealant during installation. These fittings are suitable for general pneumatic circuits carrying air or under vacuum. Refer to the dimension table for each variant for materials, specific thread sizes, and overall dimensions.

PH-N Series External Hex Fitting - NPT Thread
The PH-N series external hex fitting (NPT thread) is a threaded fitting for pneumatic piping. One end has a male NPT American tapered pipe thread that screws directly into valve bodies, cylinders, or equipment ports with female NPT threads. The external hexagonal body allows quick tightening with a wrench in confined spaces, while the mating tapered threads provide the seal. Common thread sizes include NPT1/8, NPT1/4, NPT3/8, and NPT1/2. The body is generally made of brass, with stainless steel also available. Designed for compressed air, the fitting is widely used in automated equipment, pneumatic fixtures, and production-line air piping. Select the model based primarily on the thread size and the size of the mating air tube or port.

PHT Series Stackable Elbow Fittings
PHT series stackable elbow fittings are multi-port push-in fittings for pneumatic lines. They connect multiple branch lines in a right-angle stack, making them suitable for branching and joining air lines in compact spaces. They are available for 4, 6, 8, 10, and 12 mm tubing, with R1/8~R1/2 tapered pipe threads or G1/8~G1/2 parallel pipe threads, and in 2- and 3-section configurations. The catalog provides overall dimensions, including ΦD, ΦD1, ΦD2, and L1~L6, for each model to aid selection and installation.

KJS Series Hex Socket Straight Fitting
The KJS series hex socket straight fitting, also known as a male-threaded hex socket straight fitting, is a pneumatic push-in fitting used to connect air tubing directly to a female-threaded port. A hex socket in the center allows it to be tightened with a hex key, making it particularly suitable for densely packed installations where wrench space is limited. The fitting body is typically made of nickel-plated brass and features a release ring for quick insertion and removal of tubing. The release ring is available in gray, orange-red, or black. Sizes are identified by tubing outside diameter codes 03, 23, 04, and 06 (corresponding to tubing diameters of 3, 4, 6 mm, etc.). Thread sizes include M3×0.5, M5×0.8, M6×1.0, M8×1.0, and 1/8". The external hex is approximately 3 mm across flats, the fitting length is 12.0~14.7 mm, and the effective hex socket length is 3.1~5.1 mm. To install, insert the tubing fully and pull it back to confirm it is locked. To remove it, press the release ring and pull out the tubing. The fitting is reusable.

KJL Series Male Thread Tube Fittings
KJL series male thread tube fittings are push-in threaded connectors for pneumatic systems. They have a male thread at one end, commonly in M3, M5, M6 or R1/8 sizes, and a push-in connection at the other. They connect tubing with an outside diameter of 3–4 mm directly to female-threaded ports on valves, cylinders or equipment, allowing quick installation and removal while providing a reliable seal. Model numbers identify the combination of tube size (outside diameter) and thread size. The catalog lists two key dimensions for each model—the fitting outside diameter Φ and length L—to help check installation clearance and interference in confined spaces. The fitting body is typically made of nickel-plated brass or engineering plastic, offering pressure and corrosion resistance with low flow resistance. These fittings are widely used in pneumatic circuits for automated equipment, packaging machinery and electronics assembly lines.

KJW Series Extended Male Thread Tube Fittings
KJW series extended male thread tube fittings are straight fittings for pneumatic lines. The male threaded end screws into an equipment or valve body port, while the other end connects to tubing approximately 3 mm in diameter. The extended design is useful in confined spaces or where a longer connection is needed. The catalog lists KJW03-M3, KJW03-M5, KJW03-M6, and KJW03-01S, with M3, M5, M6, and 1/8" threads respectively. Fitting outside diameters range from 3.1~7.5 mm, and fitting lengths range from 3.8~8 mm. Suitable for general fluid lines carrying air, water, and similar media, these fittings are easy to install, provide reliable sealing, and can be repeatedly disconnected and reconnected.

KJY Series Male Tee Fittings
The KJY series consists of male-threaded pneumatic push-in tee fittings for branching compressed air lines. One male-threaded end screws into an actuator or equipment port, while the other two ends connect to pneumatic tubing via push-in fittings. Suitable for PU, PA and other pneumatic tubing, they require no tools for installation and can be connected and disconnected repeatedly. Common sizes include M3, M5 and M6 metric threads and R1/8 and R1/4 pipe threads, for tubing with outside diameters of 3, 3.2, 4, 6, 8, 10 and 12 mm. The bodies are typically nickel-plated brass, with nitrile rubber seals. They are compact, offer high flow rates and resist corrosion. When selecting a fitting, confirm the thread size, tubing outside diameter and seal type. The OCR for this page retained only the series title; the model-specific dimension table is incomplete. Refer to the full catalog when selecting a fitting.

TO-POC Series Cylindrical Hex Socket Fittings
The TO-POC series cylindrical hex socket fitting is a push-to-connect male straight fitting for pneumatic lines. Its cylindrical body has a hex socket on the end face, allowing direct installation with a hex key. It is particularly suitable for confined spaces where tightening from the end is required. It accommodates seven tube outside diameters: 4, 6, 8, 10, 12, 14 and 16 mm. Thread options include M5 metric and five tapered pipe threads: R1/8, R1/4, R3/8, R1/2 and R3/4, with 28 sizes in total. Key dimensions are L1 (overall length), H, S, T (thread) and D1, with overall lengths of approximately 18.5~37 mm. The push-to-connect design uses a retaining clip to grip inserted nylon or PU tubing and an O-ring to seal it, allowing tool-free connection and disconnection. The body is typically nickel-plated brass, with an operating pressure of approximately 0~1.0 MPa and a temperature range of -20~+60 ℃. It is widely used for pneumatic connections in automated equipment, pneumatic actuators and tooling fixtures. The model code is TO-POC+tube outside diameter-thread code; thread codes 01/02/03/04/06 correspond respectively to R1/8, R1/4, R3/8, R1/

TO-PCF Straight Female Thread Fitting
The TO-PCF series straight female thread fitting is a pneumatic push-in tube fitting with a female thread (M5, G1/8, G1/4, G3/8, G1/2) at one end and a push-in connection at the other, suitable for tubing with outside diameters of 4mm, 6mm, 10mm, and 12mm. Made of nickel-plated brass, these fittings offer corrosion resistance and a reliable seal. They are widely used to connect cylinders, valves, and other components in pneumatic systems. Key dimensions include L1, L2, H, and S; values vary by model.

TO-POC-G Series Cylindrical Hex Socket Fittings
The TO-POC-G series cylindrical hex socket fitting is a push-in male threaded fitting for pneumatic lines. Its cylindrical body has a recessed hex socket at the end, allowing direct installation with a hex key, particularly in confined spaces where an external wrench cannot reach. The other end features a push-in connection that automatically locks and seals when the tube is inserted; press the release ring to disconnect. The fittings accommodate tubing with an outside diameter of φ4 mm or φ6 mm and have G1/8, G1/4, G3/8, G1/2 or G3/4 parallel pipe threads (BSPP), sealed by an end-face seal. The catalog provides overall and installation dimensions including L1, H, S1, S2 and D1 to facilitate piping layout and wrench selection. These fittings are primarily used to connect compressed air lines to cylinders, solenoid valves and air preparation components.

TO-PL-G Right-Angle Threaded Fitting
TO-PL-G series right-angle threaded fittings (male elbows) connect pneumatic tubing to female threaded ports at a 90° angle. They accommodate tubing with outside diameters of 4, 6, 8, 10, 12, 14 and 16 mm and are available with G1/8, G1/4, G3/8 and G1/2 threads. The body is nickel-plated brass and the seal is nitrile rubber. Features include push-in connections, easy installation and reliable sealing. The typical operating pressure range is 0~1.0 MPa, with a temperature range of -20~+80°C. Model numbers consist of TO-PL + tube diameter + thread size code + G. The table provides dimensions including L1, L2, H, S and D1.

TO-PB-G Series Male Branch Tee Fitting
The TO-PB-G series male branch tee fitting creates a branch from the middle of a main pneumatic line, providing a three-way connection with one inlet and two outlets or two inlets and one outlet. It fits tubing with outer diameters of φ4, φ6, φ8, φ10, φ12, φ14, and φ16 mm, and is available with G1/8, G1/4, G3/8, G1/2, and G3/4 threads. Body dimensions are marked L1, L2, H, S, etc., to help with selection based on available installation space. The model code consists of the base model TO-PB, the tube outer diameter, and the thread size code (01G~06G). For example, TO-PB4-01G denotes a fitting for φ4 tubing with a G1/8 thread. This push-in pneumatic fitting is suitable for compressed air lines, offering easy installation and reliable sealing.

TO-PD-G Series Male Branch Tee Fittings
The TO-PD-G series consists of male branch tee push-in fittings for connecting a threaded side branch in pneumatic circuits. The fittings accept tubing with an outside diameter of φ4~φ16mm and feature G-series male threads in sizes including G1/8, G1/4, G3/8, G1/2 and G3/4. The catalog provides dimensions such as L1, L2, H, S and D1 for each combination of tube outside diameter (φ4/φ6/φ8/φ10/φ12/φ14/φ16) and thread size, making selection straightforward. These fittings are widely used for air distribution in automated equipment and for supplying cylinders and valve manifolds.

TO-PH-G Series Panel-Mount Swivel Elbow Fittings
The TO-PH-G series panel-mount swivel elbow fittings are pneumatic push-to-connect threaded fittings for right-angle connections between tubing and female-threaded ports. They allow tubing to be routed around corners in confined spaces. They accommodate tubing outside diameters of φ4~φ16 mm and thread sizes G1/8, G1/4, G3/8 and G1/2, with hex widths across flats S of 14~24 mm. The catalog provides overall and installation dimensions including L1, L2, L3, H, T and S to help select the appropriate tube diameter and thread combination. The swivel design allows the fitting direction to be adjusted during installation. Typical applications include automation equipment, pneumatic control circuits and machinery piping.

TO-PX-G Series Y-Type Three-Way Threaded Fittings
TO-PX-G series Y-type three-way threaded fittings provide a branch connection with one air inlet and two outlets in pneumatic lines. One end has a male thread (G1/8, G1/4, G3/8, G1/2), while the other two ends have push-in connections for tubing with outside diameters of Φ4, Φ6, Φ8, Φ10, and Φ12 mm. Body dimensions include L1, L2, H, and width across flats S: L1 ranges from 34~60 mm, L2 from 8.6~20 mm, H from 5~9 mm, and S from 12~24 mm. The model number consists of TO-PX, the tube outside diameter code (4/6/8/10/12), and the thread size code (01/02/03/04, corresponding to G1/8, G1/4, G3/8, and G1/2 respectively). The final G indicates the threaded type. Suitable for automated equipment, pneumatic control circuits, and similar applications.

KN-PL All-Brass Male Elbow Fitting
The KN-PL all-brass male elbow is a pneumatic push-in fitting with a male threaded connection. Made entirely of brass, it is suitable for pneumatic tubing with an outside diameter of 4mm or 6mm. It is available in a range of thread sizes, including M5, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4 and G1/2, to suit different installation needs. Its right-angle design makes tubing easier to route in confined spaces, and it is widely used in automation equipment and pneumatic control systems. Key dimensions include L, L1, S1, S2 and H; values vary by model.

KN-PB T-Type All-Steel Three-Way Threaded Fitting
The KN-PB series comprises T-type all-steel three-way threaded fittings for splitting a pneumatic air supply into two lines or connecting a branch line in a T configuration. One end has a push-in tube connection for tubing with an outside diameter of 4 mm or 6 mm; the other has a male thread in sizes M5, R1/8, R1/4, R3/8, R1/2 or R3/4, for direct connection to threaded ports on common pneumatic components, solenoid valves and cylinders. Key dimensions include overall length L (starting at 36 mm), threaded end length L1, across-flats widths S1 and S2, and height H. Some models specify tube outside diameter D and inside diameter d, such as 4×Φ2.5, 10×Φ6.5 and 16×Φ12. The all-steel version is designated KN-PB; the stainless steel version with the same configuration is designated BXGKN-PB. The series is suitable for piping and air distribution in automated equipment, jigs and fixtures, and general industrial pneumatic systems.

KN-PD Series All-Steel T-Type Side-Threaded Tee Fittings
The KN-PD series consists of all-steel T-type side-threaded tee fittings for pneumatic lines requiring a three-way connection with a threaded port on the side. They fit tubing with outside diameters of 4, 6, 8, 10, 12, 14, and 16 mm, with thread sizes M5, R1/8, R1/4, R3/8, R1/2, and R3/4. Listed dimensions are approximately L 35~66.5 mm, L1 18~33.5 mm, S1 8~21 mm, S2 10~27 mm, and H 5~13 mm. The fittings are available in all-steel construction, with a BXGKN-PD stainless steel version for applications requiring corrosion resistance. Select the model according to the tube diameter and thread size.

TO-PL Series Right-Angle Threaded Fittings
TO-PL series right-angle threaded fittings (elbows) connect metal or plastic tubing in pneumatic lines, providing a 90° change of direction. The series includes male-threaded elbows (R threads) and female-threaded elbows (G threads) for tube diameters Φ4, Φ6, Φ8, Φ10, and Φ16, with thread sizes ranging from R1/8~R3/4 and G1/8~G1/2. The nickel-plated brass body offers corrosion resistance, reliable sealing, and easy installation. Key dimensions include L1, L2, S1, S2, and H, with values varying by model. These fittings are widely used in automated equipment, pneumatic control systems, and machinery manufacturing.

TO-PB Series T-Type Threaded Tee Fittings
TO-PB series T-type threaded tee fittings are used to create three-way branch connections in metal tubing systems, splitting one line into two. The catalog lists compatible metal tube outside diameters of Φ4, Φ6, Φ8, Φ10, Φ12, and Φ16 mm, with threaded connections including R1/8, R1/4, R3/8, and R1/2. It also provides overall and installation dimensions such as L1, L2, S1, S2, T, and H. Different tube diameter and thread size combinations correspond to different models, such as TO-PB4-01, TO-PB6-02, and TO-PB10-04, making it easy to select a fitting based on tube size and port thread. The series is suitable for tee branch arrangements in factory automation pneumatic or fluid lines. Confirm the specific material, operating pressure, and media compatibility using the manufacturer's documentation.

TO-PD Series Side-Threaded Tee Fitting
The TO-PD series side-threaded tee fitting is a three-way connector for pneumatic or fluid lines, suitable for side branch connections with metal tubes (Φ4~Φ16). One end has a threaded connection (R1/8~R3/4), while the other two connect to metal tubes to split or combine flow. The model number specifies the tube diameter and thread size; for example, TO-PD4-01 indicates a Φ4 tube diameter and an R1/8 thread. Body dimensions include L1, L2, S1, S2 and H. The fitting is suitable for automated equipment, pneumatic systems and similar applications.

TO-PH Series Right-Angle Milled Fittings
TO-PH series right-angle milled fittings provide a 90° connection between metal tubing (Φ4~Φ16) and threaded ports in factory automation pneumatic systems. They are available for metal tube outside diameters of 4, 6, 8, 10, 12, 14 and 16, with threaded ends in M5, R1/8, R1/4, R3/8 and R1/2 to accommodate different flow and installation space requirements. The catalog provides overall and connection dimensions including L1, L2, S1, S2, T, H and D1 to facilitate product selection and piping layout.

TO-PB Series Male Branch Tee Fittings
The TO-PB series consists of male branch tee fittings for pneumatic lines. The fitting body has a male threaded port for connecting a branch in an air line to a threaded pneumatic component or pipe, without additional welding or compression fittings. The push-in ends accommodate nylon and PU tubing with an outer diameter of Φ4~Φ12 mm. Tubing locks into place when inserted and can be removed by pressing the release ring, making repeated assembly and disassembly easy. The threaded end is available in five sizes: M5, R1/8, R1/4, R3/8 and R1/2. Codes 01/02/03/04 correspond to R1/8, R1/4, R3/8 and R1/2, respectively. The catalog lists installation dimensions by tube outer diameter and thread size, including L1 (overall length), L2 (threaded end length), H (height at the thread base), D (air passage diameter) and S (width across flats), to help with selection and piping layout. The series also includes straight, elbow and four-way variants; this table covers the male branch tee type. These fittings are widely used for air distribution and actuator supply in automation equipment, pneumatic fixtures and packaging machinery.