Metal Push-in Fittings
KN-PV Series All-Brass Elbow Fittings
KN-PU Series All-Brass Straight Union
KN-PG Series All-Brass Straight Reducing Fitting
KN-PM Series All-Brass Straight Bulkhead Fittings
All-Brass Straight Bulkhead Fitting

MBCF Series Straight Push-in Fittings
The MBCF series consists of straight push-in pneumatic tube fittings, with a push-in tube connection at one end and a threaded connection at the other. They connect pneumatic tubing such as nylon and PU directly to threaded ports on cylinders, valve manifolds, air distribution blocks and other components. Seven tube outside diameters are supported: 4, 6, 8, 10, 12, 14 and 16 mm. Thread options include M5×0.8 metric fine thread and G1/8, G1/4, G3/8 and G1/2 pipe threads. The complete model is determined by the combination of tube diameter and thread. Dimensions include D (tube outside diameter), L (overall length), L1 (thread engagement length), H (hex width across flats) and H1 (height), making it easy to check installation clearances. The push-in design allows tool-free tube insertion and removal, while internal seals ensure airtightness. The fittings are suitable for conventional industrial pneumatic control circuits using compressed air.

MBL Series Push-to-Connect Elbow Fittings
The MBL series consists of push-to-connect elbow (L-type) pneumatic fittings for 90° connections between nylon or polyurethane tubing and pneumatic components with male threads. The fittings accommodate tubing with an outside diameter of 4 mm or 6 mm and are available with M5×0.8, G1/8, G1/4, G3/8 and G1/2 connection threads (designated M5 and G01~G04 in model numbers). Model numbers consist of the base model MBL04 / MBL06 and a connection thread code, as in MBL04-G01 and MBL06-G02. The catalog provides dimensions including D (tube diameter), L (overall length), L1, L2, G (thread), H and H1 (width across flats) to help with selection. During assembly, press the collet to secure the tubing without tools, enabling quick pneumatic piping for automated equipment. The same catalog page also includes a dimension table for MBCF series straight threaded fittings, whose D, L, L1, G, H and H1 parameters can be compared with those of this series when selecting a fitting.

MBBT Series Pneumatic Fittings
MBBT series pneumatic fittings are miniature fittings for pneumatic lines, compatible with tubing with an outside diameter of 4 mm or 6 mm. They are available with M5×0.8 metric threads and R1/8, R1/4, R3/8, and R1/2 pipe threads. The catalog provides a complete model table with dimensions including D (compatible tube diameter), L (overall length), L1/L2 (installation-related lengths), G (thread size), and H/H1 (overall heights). The MBBT04 has an overall length of 34 mm and the MBBT06 has an overall length of 33 mm; H ranges from 10~21 mm and H1 from 8~12 mm. These fittings are suitable for connecting the air supply to automation equipment, pneumatic fixtures, and small actuators. Select the appropriate model based on tube diameter and thread size.

MBST Series Fittings
The MBST series consists of straight male-threaded fittings for connecting hoses or tubing with nominal outside diameters of 4~16 mm to M5 and R (tapered pipe) threaded ports. The products are available in seven nominal diameter groups: MBST04, MBST06, MBST08, MBST10, MBST12, MBST14 and MBST16. Each group is further divided by thread size, with codes including M5×0.8, 01 (R1/8), 02 (R1/4), 03 (R3/8) and 04 (R1/2), for a total of 24 standard sizes. The catalog lists the main dimensions as nominal tubing diameter D, overall length L, end lengths L1, L2 and L3, thread size R, and hex widths across flats H and H1. For example, MBST04-M5 has an overall length L=33 mm and a hex width of 10 mm, while MBST16-04 has an overall length L=64 mm and a hex width of 24 mm. The same page also lists the similarly constructed MBBT series, which has a different model designation system and is a separate series. Select a fitting to match the tubing outside diameter and the equipment port thread. Note that R series threads are tapered pipe threads, while the G series

MBSC Series Pneumatic Fittings
MBSC series pneumatic fittings connect tubing to threaded ports in pneumatic and fluid piping systems. Sizes are available for tube outer diameters D of 4, 6 and others. Connection threads G include metric M5×0.8 and imperial R1/8, R1/4, R3/8 and R1/2. During installation, tighten using the hex flats at H and H1. Overall length L and insertion/assembly dimensions L1, L2 and L3 vary with thread size; larger threads have correspondingly greater lengths and widths across flats. The same catalog page also lists MBH, MBH-G and MBUC straight-through variants for different routing directions. This series is suitable for automation equipment, pneumatic fixtures and production line piping, with compressed air as the working medium. Select a fitting that matches the air tube outer diameter and port thread.

MBH Series Male Straight Push-in Fittings
The MBH series consists of male straight push-in fittings for pneumatic lines. One end has a push-in port for direct connection of nylon or polyurethane tubing with an outside diameter of 4, 6, 8, 10, or 12 mm. The other end has a male thread that screws into the female port of a cylinder, solenoid valve, or air preparation unit. Multiple thread options are available for each nominal size: the model suffix M5 corresponds to M5×0.8, while 01/02/03/04 correspond to R1/8, R1/4, R3/8, and R1/2 tapered pipe threads, respectively. The MBH-G version is also available, with G01~G04 corresponding to G1/8, G1/4, G3/8, and G1/2 parallel threads, respectively. Dimensions vary with connection size: overall body length L is approximately 19~38.5 mm, threaded length L1 is 4~13.5 mm, and hex width across flats H is 8~24 mm for convenient wrench installation.

MBH-G Series Straight Male Thread Push-in Fittings
The MBH-G series comprises straight male thread push-in pneumatic fittings with G (parallel pipe thread) connections. They complement the MBH series with R (tapered pipe thread) connections and are suitable for applications requiring parallel threads, such as face-seal connections with an O-ring. Five tube outside diameters are available: Φ4, Φ6, Φ8, Φ10 and Φ12, with four thread sizes: G1/8, G1/4, G3/8 and G1/2. An internal retaining clip and O-ring allow quick tube connection and disconnection with a reliable seal. The fittings can be installed and removed without tools and are reusable. Dimensions include D (applicable tube diameter), L (overall length), L1, L2 and L3 (section lengths), G (thread size), H (width across flats) and H1. Length increases with tube diameter and thread size, with an overall length of approximately 22.5~38.5mm. These fittings are widely used for pneumatic piping in factory automation equipment, cylinder and solenoid valve connections, vacuum circuits and quick connections for various pneumatic actuators.

MBUC Series Straight Tube Fittings
The MBUC series comprises equal-diameter straight tube fittings for connecting two tubes of the same outside diameter in a straight line. They are suitable for pneumatic and low-pressure fluid systems. The catalog offers seven tube sizes, D=4、6、8、10、12、14、16 mm, with overall lengths L of 20~44 mm and hex widths across flats H/H1 of 8~22 mm for wrench-assisted installation. Models are designated by MBUC followed by a two-digit tube diameter code (e.g., MBUC04). Compact and easy to install, these fittings can be used with nylon, polyurethane and other tubing of the corresponding diameter.

BKC-PB/PD Series Push-to-Connect Pneumatic Fittings
The BKC-PB/PD series comprises push-to-connect pneumatic fittings in two configurations: PB straight (male threaded straight) and PD elbow (male threaded elbow). They fit tubes with outside diameters of Φ4 and Φ6 mm and are available with M5, M6, R1/8, R1/4, R3/8 and R1/2 threads. Body width across flats H is S10, S14 or S17, installation length L is approximately 35–42.5 mm, L1 is approximately 17.5–23 mm, and ΦP is 9.5–13.5 mm. Designed for quick connection and disconnection of air lines, they are widely used in automation equipment, pneumatic actuators and air systems.

BKC-PD Series Pneumatic Push-in Fittings
The BKC-PD series comprises pneumatic push-in fittings with a threaded connection and a push-in port for Φ4 and Φ6 tubing. Listed thread sizes include M5, M6, R1/8, R1/4, R3/8 and R1/2, with body outside diameters of Φ9.5, Φ11 and Φ13.5 mm. Dimensions provided include overall length L, L1, bore diameter ΦC, thread length A, width across flats E and wrench size H. These fittings provide quick connections between tubing and actuators, valve manifolds or air supplies in automated pneumatic circuits, making installation and maintenance convenient. Select a fitting that matches the tubing outside diameter and port thread. Refer to the actual product or the manufacturer's technical documentation for operating pressure, medium temperature and other parameters.

BKC-PG Series Fittings
BKC-PG series fittings are designed for pneumatic tubing connections in factory automation. The catalog covers metric tube diameters of 4, 6, 8, 10, 12, 14, and 16 mm, as well as imperial and mixed sizes such as 1/4-5/32, 5/16-1/4, 3/8-1/4, and 1/2-3/8. The table lists key dimensions including ΦD, ΦP, ΦC, E, and L to help verify tubing dimensions and installation space during selection. These fittings are suitable for connecting pneumatic actuators, pneumatic manifolds, and automated equipment tubing, and can be ordered directly by model code.

BKC-PU Series Fittings
BKC-PU series fittings are straight fittings for pneumatic and fluid line connections. They are available for tube outside diameters of Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16, corresponding to models BKC-PU4 through BKC-PU16. The catalog provides key dimensions including ΦD (tube outside diameter), ΦP, ΦC, E and L for tubing selection and installation space checks. Their compact design makes them suitable for automated equipment where lines require quick connection and disconnection. These are standard components; refer to the manufacturer's technical documentation for material, operating pressure, compatible media and temperature range.

BKC Series Pneumatic Push-in Fittings
The BKC series consists of push-in fittings for pneumatic lines, including PU straight unions, PG reducing and threaded adapters, PMK threaded straight fittings, and PLM threaded elbows. They accommodate tube outer diameters from Φ4~Φ16 mm and include imperial thread sizes of 1/4, 5/16, 3/8 and 1/2, as well as metric thread sizes from M11X1~M23X1. Each model specifies overall and mounting dimensions such as ΦD, ΦP, ΦC, E, L, H, L1 and A, making it easy to select fittings by tube diameter and thread size for pneumatic circuits in factory automation equipment.

BKC Series Pneumatic Push-to-Connect Fittings
BKC series pneumatic push-to-connect fittings provide quick connections for tubing in pneumatic lines. Their push-in design automatically locks and seals the tubing upon insertion. To disconnect, press the release ring and pull out the tubing. The series includes PU straight fittings, PG straight/bulkhead fittings, PMK male straight fittings, and PLM male elbow fittings. Metric models fit Φ4~Φ16 mm tubing, while imperial models fit 1/4″~3/8″ tubing. Thread sizes range from M11×1~M23×1 and include imperial threads. The bodies are typically made of brass or engineering plastic and fitted with nitrile rubber (NBR) seals. These fittings offer pressure and corrosion resistance and easy installation, and are widely used for pneumatic connections in automation equipment, pneumatic actuators, and measurement instruments. Select the model according to tubing outside diameter (ΦD), connection thread size, and fitting type (straight, elbow, male thread, etc.).

BKC-SL Series Push-in Fittings
The BKC-SL series comprises straight male-threaded push-in fittings for quickly connecting and securing pneumatic tubing with an outside diameter of Φ4 or Φ6 to female-threaded components. They are widely used with cylinders, solenoid valves, air preparation units and other pneumatic lines. One end has a push-in tube port (ΦD indicates the compatible tube outside diameter, Φ4/Φ6), while the other has a male thread. Thread options include metric M5 and M6 and British pipe threads R1/8, R1/4, R3/8 and R1/2. Dimensions are defined by T (thread), ΦD (tube outside diameter), ΦP (fitting body diameter), L1 (overall length), A (effective thread length), E (width across flats/hex size) and H (installation hex S10/S14/S17). Overall length ranges from 24~31.5mm, and body diameter from Φ9.5~Φ11. The fittings have a nickel-plated brass body, an engineering plastic release ring and an NBR seal. Tubing can be inserted and removed without tools for repeated assembly and disassembly. They are suitable for standard compressed-air lines; dedicated models are required for vacuum or corrosive media. Select the appropriate code according to the tube outside diameter and mating thread specification.

BKN-PB/PLB Series Pneumatic Push-in Fittings
The BKN-PB/PLB series consists of push-in fittings for pneumatic lines. One end has a male thread (M5 or M6 metric thread, or G1/8, G1/4, G3/8 or G1/2 pipe thread), while the other has a push-in port for metric pneumatic tubing such as Φ4 and Φ6. They connect nylon or PU tubing to cylinders, solenoid valves and air preparation components. The series includes BKN-PB straight and BKN-PLB configurations. The PLB type is shorter and more compact, making it suitable for installation in confined spaces. For each nominal size, the catalog lists dimensions including thread size T, compatible tube outer diameter ΦD, assembly length L1, overall length L, wrench clearance A and E, and hex widths across flats H and H1, to aid selection and installation checks. The fittings are easy to connect and disconnect, provide a reliable seal, and can be repeatedly disassembled and reassembled. They are suitable for standard compressed air systems.

BKN-PB/PLB Series Pneumatic Push-In Fittings
The BKN-PB/PLB series comprises push-in fittings for pneumatic lines, available in PB straight and PLB elbow configurations. One end has a male thread (M5, M6, G1/8, G1/4, G3/8, G1/2, etc.), while the other has a push-in port compatible with Φ4, Φ6, Φ8 and Φ12 metric nylon or polyurethane tubing. Once inserted, the tube is automatically secured and sealed by an internal spring clip and O-ring. To disconnect it, simply press the release ring; no tools are required. The catalog lists models by thread size and tube diameter and provides installation dimensions including L1 (threaded end length), L (overall length), A (effective thread length), E (body reference dimension), and H and H1 (hexagon across-flats dimensions, S10~S24), making it easier to plan tubing layouts and select wrenches. These fittings are widely used in automation equipment, cylinder and solenoid valve piping, fixture air lines, packaging lines, and electronics assembly lines. They are suitable for compressed air, with a typical operating pressure of 0~0.9 MPa and an operating temperature of approximately -5~60 ℃, depending on the tubing material.

KN-PE Series All-Steel Tee Fittings
KN-PE series all-steel tee fittings are push-in fittings for pneumatic systems, designed to split or combine compressed air and other gas flows in a T-shaped configuration. They are available in seven tube outer diameter sizes: φ4, φ6, φ8, φ10, φ12, φ14 and φ16, corresponding to models KN-PE4~KN-PE16. Overall dimensions range from 36~67 mm for L, 18~33.5 mm for L1 and 8~21 mm for S1; D×d dimensions are also specified (e.g., 4×φ2.5). The all-steel construction is suitable for applications requiring strength, wear resistance and corrosion resistance. BXGKN-PE stainless steel tee fittings are also available in the same series. To install, simply insert the air tube into the fitting. The number in the model indicates the compatible tube outer diameter.

KN-PZA Series All-Steel Four-Way Cross Fittings
The KN-PZA series comprises all-steel four-way cross fittings for connecting four pneumatic tubes at a single junction to split or combine airflow. A stainless steel version with the same configuration, BXGKN-PZA, is also available for damp or corrosive environments or applications with higher cleanliness requirements. Seven sizes are available for tube outside diameters of φ4, φ6, φ8, φ10, φ12, φ14 and φ16. The model number is formed by adding the tube outside diameter directly after the series designation KN-PZA (for example, KN-PZA8 fits φ8 tubing). The metal body offers better pressure, impact and temperature resistance than ordinary plastic push-in fittings, making it suitable for pneumatic connections in machinery manufacturing, automated production lines, welding and spray equipment. Select the fitting primarily by tube outside diameter. During installation, insert the tubing fully and ensure that the forces on all four ports are evenly distributed.

KN-PE / BXGKN-PE Series Tee Fittings
The KN-PE / BXGKN-PE series consists of equal-diameter push-to-connect tee fittings for pneumatic tubing, available in all-steel KN-PE and stainless steel BXGKN-PE versions. They accommodate tubing with outside diameters of φ4~φ16 mm and are used to branch or combine flow in pneumatic circuits. The catalog lists L, L1, S1, and D×d dimensions for each size: L is approximately 36~67 mm, L1 approximately 18~33.5 mm, and S1 approximately 8~21 mm. The all-steel version is suitable for general industrial pneumatic systems, while the stainless steel version is suited to corrosive, clean, or more demanding environments. Select the model according to the tubing outside diameter; for example, φ4 corresponds to KN-PE4. Stainless steel models are designated by the BXGKN-PE prefix followed by the tubing diameter.