Plastic Push-In Fittings — Page 2

PM Series Straight Bulkhead Union
The PM series straight bulkhead union is a plastic push-to-connect pneumatic fitting used to secure and connect tubing through panels, partitions, or enclosure walls. The fitting body passes through a mounting hole and is secured to the panel with a locknut. Tubing pushes directly into the fittings at both ends for quick installation and removal. It is commonly used for through-panel pneumatic connections between cylinders, solenoid valves, air preparation components, and tubing circuits. The series comprises five models based on compatible tubing outside diameter: PM04, PM06, PM08, PM10, and PM12, with corresponding ΦD values of 4, 6, 8, 10, and 12 mm. The catalog table also specifies ΦD1 (outside diameter of the through-panel/threaded section) and overall and mounting dimensions such as L, L1, L2, M, and φ, making it easier to select a fitting based on panel thickness and mounting hole diameter. The same catalog page also lists related plastic push-to-connect fittings, including PLM bulkhead threaded fittings, PZ plastic four-way fittings, and PE plastic equal tees. These are separate series; the PM series covers only straight bulkhead unions. Selection is primarily based on three parameters: tubing outside diameter ΦD, mounting hole size, and bulkhead thread specification.

PLM Series Bulkhead Union Fittings
The PLM series bulkhead union is a plastic push-in fitting for connecting pneumatic tubing through a panel. It is suitable for tubing with an outside diameter of 4mm to 12mm. Made from engineering plastic, these fittings are corrosion-resistant, lightweight, and easy to install. Key dimensions include nominal diameter ΦD (4/6/8/10/12mm), outside diameters ΦD1 and ΦD2, overall length L, lengths L1 and L2, thread size M, and wrench flat size φ. They are suitable for panel mounting and tubing connections in automation equipment, pneumatic control systems, and similar applications.

PZ Series Plastic Four-Way Fittings
The PZ series consists of plastic four-way (cross) fittings for distributing or combining air across four pneumatic lines. They can be used with other plastic pneumatic fittings in the same series, including PM bulkhead straight fittings, PLM bulkhead threaded fittings, and PE plastic equal tees. Sizes are specified by tube outside diameter: five metric sizes, ΦD 4, 6, 8, 10, and 12 mm, and five inch sizes, 5/32, 1/4, 5/16, 3/8, and 1/2, all in the same fitting design. Catalog dimensions include ΦD tube outside diameter, ΦD1 body outside diameter, ΦD2 bore diameter, L1 overall length, L2 center-to-end distance, and L3 branch length. As the tube outside diameter increases, the body outside diameter increases from 11.5 mm to 21.5 mm, the overall length from 38 mm to 59 mm, and the bore diameter from 3.2 mm to 4.3 mm. The fittings have plastic bodies and push-in connections, making them suitable for tubing and air distribution in general industrial pneumatic circuits.

PU Series Plastic Straight Union
The PU series plastic straight union is a push-in fitting commonly used in pneumatic lines to connect or extend plastic tubing. Models are classified by tube outside diameter, with sizes ranging from Φ4 to Φ332 mm. The table lists overall dimensions including ΦD, ΦD1, ΦD2, ΦD3 and total length L. The fitting has a lightweight plastic body and installs by simply inserting the tube. Body outside diameter and length vary by tube size, so check both the tube diameter and available installation space when selecting a model. Suitable for automation equipment, pneumatic control systems and general industrial piping.

PPGJ Series Push-in Plastic Straight Connectors
PPGJ series push-in plastic straight connectors are injection-molded from engineering plastic for quick, straight connections between pneumatic tubes. Sizes are specified by the applicable tube outside diameter ΦD (6, 8, 10, 12 mm) and mating end dimension ΦD1, with models ranging from PPGJ06-04 to PPGJ12-10. Key dimensions include ΦD, ΦD1, ΦD2 (outer/hex diameter), and lengths L1 and L2. L1 is approximately 20~26.5 mm and L2 is approximately 36.5~50 mm. The connectors lock upon insertion and are easy to install and remove. They are suitable for quick connection of plastic tubing (PU/PA, etc.) in pneumatic systems using compressed air.