Rigid Coupling

DXG45 Series Steel Set Screw Series

DXG45 Series Steel Set Screw Series

The entire structure is made of 45# steel. High torque and high rigidity. The rigid type essentially does not allow eccentricity, so alignment must be carefully adjusted during use. Set-screw fastening.

DX Aluminum Alloy Rigid Set Screw Series

DX Aluminum Alloy Rigid Set Screw Series

The DX aluminum alloy rigid set screw series features a one-piece design made entirely of high-strength aluminum alloy, delivering high torque and rigidity. This is a rigid series with virtually no allowance for eccentricity, so careful alignment is essential during installation. It uses set screws for fastening, making installation straightforward. These products are suitable for applications requiring precise power transmission and accurate alignment, providing a reliable shaft connection. A range of bore and outer diameter combinations is available to suit different shaft sizes.

DXG Series Set Screw Couplings

DXG Series Set Screw Couplings

DXG Series Set Screw Couplings feature an integrated design and are available in two materials: stainless steel (DXG-S) and 45# steel (DXG). The stainless steel models are made entirely of SUS304/316 and polished. The carbon steel models are made of 45# steel with a blackened finish; nickel plating, zinc plating, and phosphating are available on request. These couplings offer high torque and high rigidity. As rigid couplings, they do not accommodate misalignment, so the shafts must be carefully aligned before use. They are secured with set screws (positioning screws). Bore diameters can be freely configured to meet user requirements and are machined to standard H7/H8 tolerances; custom specifications are also available. A range of sizes is offered, with outer diameters from 16 mm to 82 mm, lengths from 24 mm to 68 mm, rated torque from 5 to 175 N·m, maximum speeds from 24,000 to 3,800 RPM, and weights from 28 to 2,100 g. Suitable for high-precision positioning and drive applications involving servo motors, stepper motors, and more.

DXG-S Series Rigid Couplings

DXG-S Series Rigid Couplings

DXG-S Series stainless steel set-screw couplings are made from SUS304/316 stainless steel and feature a one-piece design for high rigidity and high torque, making them suitable for precision power transmission. They use set screws for fastening, and the bores are machined to standard H7/H8 tolerances. The two end bores can be freely combined in ascending sizes, and custom specifications are available. Multiple sizes are offered, with outer diameters from 16 mm to 82 mm, lengths from 24 mm to 68 mm, rated torque from 5 to 175 N·m, and maximum speeds from 3,800 to 24,000 RPM.

JQ Split-Shell Coupling

JQ Split-Shell Coupling

The JQ split-shell coupling has no elastomer in the middle. Its suspended design uses a central lifting ring to grip the shaft ends on both sides and transmit torque, making it suitable for vertical installation. It is commonly used to connect reactor agitator shafts manufactured in two sections when the shaft is too long, or to connect the output shaft of a vertical gear reducer to a reactor agitator shaft. It is made of 45# steel and has a zinc-plated or phosphated surface finish. Fastening screws are included. When selecting a model, specify the outer diameter, length, and bore dimensions. A keyway (suffix K), hexagonal bore (F), square bore (S), or splined bore (H) can also be added.

N-Type Rigid Coupling Locking Assembly

N-Type Rigid Coupling Locking Assembly

The N-type rigid coupling locking assembly is a keyless drive component made of Grade 45 steel with a blackened finish. Optional surface treatments include nickel plating, zinc plating, and phosphating. Tightening the bolts provides a backlash-free, high-precision fit that is easy to adjust angularly. Eliminating keyway machining also reduces overall costs. The assembly offers high torque transmission and excellent resistance to axial loads, and can handle torque and axial loads simultaneously. It can also be used with a keyway, although torque transmission is reduced by 15–20%. Model numbers begin with N-, followed by the outer diameter, length, and bore diameters d1 and d2. For example, N-13×21.5×6×6 has an outer diameter of 13 mm, a length of 21.5 mm, and 6 mm bores. Optional features include a keyway (suffix K), hexagonal bore (F), square bore (S), or spline bore (H). The assembly is suitable for confined spaces and requires no axial installation clearance.

Spline Sleeve Coupling

Spline Sleeve Coupling

A spline sleeve coupling connects two shafts using a shared sleeve and rigid connecting elements such as keys, splines, or taper pins. Keyed connections can transmit higher torque and require axial fixation with set screws, while pin connections are used to transmit lower torque. The product is made of 45# steel, with black oxide, chrome, zinc, or nickel plating available as surface finishes. Custom designs and special materials are available to meet specific operating requirements.

DXC Series Rigid Couplings

DXC Series Rigid Couplings

The DXC series features one-piece metal diaphragm couplings made with a high-strength aluminum alloy body and anodized finish. They offer zero backlash and high rigidity, making them suitable for precision power transmission. As they cannot compensate for misalignment, careful alignment is required during installation. A range of sizes is available, with shaft diameters from 4 mm to 35 mm, outer diameters from 16 mm to 95 mm, and lengths from 16 mm to 126 mm. Rated torque ranges from 10 N·m to 220 N·m, maximum torque from 20 N·m to 440 N·m, and maximum speed from 7,500 to 19,000 rpm.

DXCG Series One-Piece Metal Rigid Couplings

DXCG Series One-Piece Metal Rigid Couplings

The DXCG Series features one-piece metal rigid couplings made from No. 45 steel or stainless steel. With zero backlash and high rigidity, they transmit power and motion without loss, making them suitable for applications requiring precise alignment. The series includes two subseries: the standard DXCG and the stainless steel clamp-type DXCG-S. A variety of cross-sectional sizes are available in square and rectangular shapes. Surface finishes include black oxide, nickel plating, zinc plating, and phosphating. Rated torque ranges from 18 to 300 N·m, and maximum speed reaches 6,000 rpm, making these couplings suitable for a wide range of industrial drive systems.

SPG Series Rigid Couplings

SPG Series Rigid Couplings

The SPG series consists of rigid couplings secured with clamping screws, designed for precision power transmission between shafts. These couplings offer high torque, low inertia, and high-speed operation. Models include SPG-34WS, SPG-34W, SPG-34WL, SPG-39WS, SPG-39W, SPG-44WS, SPG-44W, SPG-44WL, SPG-56WS, SPG-56W, SPG-56WL, and SPG-68WS. Bore diameters range from 5 mm to 35 mm, rated torque is 4–10 N·m, and maximum speed is 10,000 rpm. They are typically made of aluminum alloy or stainless steel, offering good rigidity and precision. Suitable for automation equipment, robots, machine tools, and other applications.

SP Rigid Coupling

SP Rigid Coupling

SP series rigid couplings are available in aluminum alloy (SP) and stainless steel (SSP), with a choice of clamp-type (C) or set-screw-type (I) mounting. Machined as a single piece, they provide zero backlash and offer high torsional rigidity with low weight and inertia. Suitable for precision drive applications such as servo and stepper motors. Outer diameters range from 16 to 32 mm, and bore diameters from 3 to 16 mm depending on the model. Maximum speed is up to 39,000 rpm.

L Series Rigid Couplings

L Series Rigid Couplings

L Series rigid couplings feature a one-piece design with high torque capacity and rigidity. They are suitable for applications requiring precise torque transmission and minimal torsional backlash, including XY-axis stages, indexing tables, machine tools, injection molding machines, material handling equipment, and dispensing machines. Models are available in B (clamp type) and D (set-screw type) configurations, with a choice of bore diameters at the D1 and D2 ends. The series is suitable for connecting servo motors to drive components such as ball screws and timing belt pulleys, and is secured by clamps or set screws during installation.

GCS01 Split Rigid Coupling

GCS01 Split Rigid Coupling

The GCS01 series consists of split rigid couplings made of aluminum alloy with an anodized surface. They offer high torque capacity and high rigidity. Rigid couplings allow virtually no misalignment, so careful alignment is essential during installation. They are secured with clamping screws, and the bores can be machined to H7/H8 tolerances. Custom specifications are available on request. The series includes two base models, GCS01 and GCS02. The GCS01 has an outer diameter of 16 mm, while the GCS02 is available in several sizes, including 20 mm, 25 mm, and 32 mm, to suit different shaft diameters. These couplings are typically used in machinery requiring precise alignment and high-torque transmission.