Model · JQ Split-Shell Coupling
JQ Split-Shell Coupling
The JQ split-shell coupling has no elastomer in the middle. Its suspended design uses a central lifting ring to grip the shaft ends on both sides and transmit torque, making it suitable for vertical installation. It is commonly used to connect reactor agitator shafts manufactured in two sections when the shaft is too long, or to connect the output shaft of a vertical gear reducer to a reactor agitator shaft. It is made of 45# steel and has a zinc-plated or phosphated surface finish. Fastening screws are included. When selecting a model, specify the outer diameter, length, and bore dimensions. A keyway (suffix K), hexagonal bore (F), square bore (S), or splined bore (H) can also be added.
Overview
The JQ split-shell coupling has no elastomer in the middle. Its suspended design uses a central lifting ring to grip the shaft ends on both sides and transmit torque, making it suitable for vertical installation. It is commonly used to connect reactor agitator shafts manufactured in two sections when the shaft is too long, or to connect the output shaft of a vertical gear reducer to a reactor agitator shaft. It is made of 45# steel and has a zinc-plated or phosphated surface finish. Fastening screws are included. When selecting a model, specify the outer diameter, length, and bore dimensions. A keyway (suffix K), hexagonal bore (F), square bore (S), or splined bore (H) can also be added.
Product category: Power transmission components / Couplings / Rigid couplings
Models & specifications
| Model / Name | Bore diameter1 (mm) | Bore diameter2 (mm) | finish | Length (mm) | material | Outer diameter (mm) |
|---|---|---|---|---|---|---|
| JQ-1-102×130-38×25 JQ split-shell coupling, 102 mm outer diameter, 130 mm length, 38 × 25 mm bores | 38 | 25 | 镀锌、磷化 | 130 | 45#钢 | 102 |










