Linear Guide — Page 2

MGN Series Miniature Ball Linear Guides

MGN Series Miniature Ball Linear Guides

MGN Series miniature ball linear guides are compact and lightweight, making them ideal for small equipment. Their thin-profile, four-point contact design handles loads in all directions while providing rigidity and high precision. A ball retainer is incorporated, and the guides are interchangeable within the limits of precision. The assembly consists of balls, a slider, end caps, an oil scraper, a rail, a retainer, a dust-protection system, a ball recirculation system, and a lubrication system. MGN15 models have a grease nipple on the end cap; MGN7, MGN9, and MGN12 models have a lubrication port on the end cap. The dust-protection system includes an oil scraper, optional dust seals (sizes 9, 12, and 15), and bolt caps (sizes 12 and 15). Rail sizes include MGN7, MGN9, MGN12, and MGN15, each available in C (standard) and H (heavy-load) types. Assembly height: 8–16 mm; slider width: 17–32 mm; rail width: 7–15 mm; basic dynamic load rating: 0.98–6.37 kN; basic static load rating: 1.24–9.11 kN.

MGN / MGW Series Linear Guides

MGN / MGW Series Linear Guides

MGN/MGW Series miniature linear guides are made of high-quality bearing steel and offer high precision, high rigidity, low friction, and low noise. The series is available in a range of sizes, including 5, 7, 9, 12, and 15. Load types include standard (C) and extended (H), and custom carriage machining (E) is available on request. Products are available with carriages supplied separately, rails supplied separately, or multiple rails on a single axis (marked II or III). Rail lengths can be customized as needed (for example, designations such as R1000 and R1600). They are widely used in applications requiring precise linear motion, including semiconductor equipment, medical instruments, precision measurement, automated assembly, and robotics.

MGN and MGW Series Miniature Linear Guides

MGN and MGW Series Miniature Linear Guides

The MGN and MGW Series miniature linear guides are designed for applications such as precision automation equipment, semiconductor equipment, and medical devices, where installation space is limited but high precision is required. The products are available in three accuracy grades—Normal (C), High (H), and Precision (P)—so customers can choose the grade that meets their equipment’s requirements. Tolerances for the combined rail height (H) and width (N), paired rail-to-rail variation, and running parallelism are clearly specified. Running parallelism tolerances vary with rail length, with corresponding accuracy values for lengths ranging from under 50 mm to over 17,000 mm, covering even extremely long travel applications. The products are available in non-interchangeable and interchangeable types. Non-interchangeable rails offer greater accuracy when used as a matched pair. Interchangeable rails provide the same accuracy as non-interchangeable rails individually, but are slightly less accurate when mixed across rails. All accuracy specifications are given in millimeters or micrometers to meet the stringent straight-line motion requirements of high-end equipment.

MGW Miniature Linear Guideway Series

MGW Miniature Linear Guideway Series

The ADSM MGW series comprises miniature ball linear guideways featuring a Gothic-arch design with equal load capacity in four directions. Offering high precision, high rigidity, and low friction, they are ideal for compact motion systems in semiconductor equipment, medical instruments, precision automation equipment, and other applications. The series includes four sizes: MGW 7, 9, 12, and 15. Each size is available with C (standard clearance) or H (heavy preload). Assembly height ranges from 9 to 16 mm, block width from 25 to 60 mm, basic dynamic load rating from 1.37 to 5.10 kN, and basic static load rating from 2.06 to 8.24 kN. Allowable static moment ranges from 15.70 to 102.70 N·m, individual block weight from 0.020 to 0.103 kg, and rail weight from 0.51 to 1.49 kg/m. All models can be supplied in custom lengths to meet different stroke requirements.

ADS Series Linear Guide Rails

ADS Series Linear Guide Rails

ADS Series linear guide rails are general-purpose components used for precision linear guidance in factory automation equipment. They feature an RG body structure and consist mainly of end caps, carriages, guideways, and rails. Multiple rail-mounting options are available to suit different mounting surfaces and load conditions. The carriage rolls back and forth along the rail to provide low-friction linear motion. These guides offer high rigidity and load capacity, smooth operation, and a long service life. They are widely used in applications requiring reciprocating guidance, including robotic arms, automated assembly lines, conveying equipment, and CNC machine tools. A range of rail widths, carriage lengths, and accuracy grades is available to meet different requirements; the specific size is selected according to the stroke and load. Compact and easy to install, these products are often used as alternatives to imported linear guides in domestically manufactured automation equipment.

RG Series Interchangeable Linear Guideways

RG Series Interchangeable Linear Guideways

The RG Series Interchangeable Linear Guideways are available with interchangeable blocks and rails. Blocks are available in flange (W) and square (H) styles, and rails are available in single-rail (R) style. Eight sizes are offered: 15, 20, 25, 30, 35, 45, 55, and 65. Load types include heavy-load (C) and super-heavy-load (H); accuracy grades are H and P; and preload options are Z0 and ZA. Special machining (E) and various locking and mounting options are also available. Featuring internationally standardized mounting dimensions and excellent interchangeability, these guideways are widely used in automation equipment, machine tools, semiconductor equipment, and precision positioning mechanisms.

RG Super Heavy Load Series Roller Linear Guideway

RG Super Heavy Load Series Roller Linear Guideway

This RG super-heavy-load series of roller linear guideways uses rollers as rolling elements, offering greater rigidity and load capacity than ball-type guideways of the same size. It is suitable for heavy-duty equipment and applications requiring high-rigidity linear motion. The page provides dimensional specifications for two configurations, RGH-CA and RGH-HA. It also gives the conversion relationship between kgf and N and notes that the values in the table are theoretical dynamic load ratings for C100R. To determine the C50R load rating, use C50R = 1.23 × C100R.

SGR/SGB Series Linear Guide Rails

SGR/SGB Series Linear Guide Rails

The SGR/SGB series linear guide is a complete precision linear guiding assembly consisting of a matched SGR rail and SGB carriage, designated SG (complete set). It is available in six sizes: 15N, 15, 20N, 20, 25, and 35. Sizes 15 and 20 come in standard and N (narrow-profile) versions. Rail height ranges from 32 to 45 mm, width from 38 to 90 mm, and weight per meter from 1.651 to 6.442 kg. The mounting-hole pitch P is 120 mm (160 mm for size 35). Each size offers carriages with three suffix options: -3, -4, and -5. Carriage width ranges from 44 to 100 mm, length from 72 to 185 mm, mounting thread size from M5 to M10, and carriage weight from 140 to 1,450 g. The basic dynamic safety load ranges from 700 to 4,000, and the maximum dynamic moment is 360 N·m; load capacity increases with size. Suitable for linear motion applications requiring high guiding accuracy and rigidity, including automation equipment, CNC machine tools, and material handling and assembly lines.

OSG Series Linear Guides

OSG Series Linear Guides

OSG series linear guides are standard linear motion components for factory automation, manufactured domestically. They feature a recirculating-ball design and are supplied as matched sets consisting of a rail (OSG) and a carriage (OSGB). The series includes four sizes: OSG-20, OSG-25, OSG-30, and OSG-40. Rail height ranges from 30 to 50 mm, rail width from 60 to 130 mm, carriage length from 60 to 130 mm, and mounting-hole pitch is 60 mm. They can withstand loads and moments from multiple directions. Both the rails and carriages are precision-ground, offering high rigidity, high positioning accuracy, low friction, and long service life. They are widely used in automation equipment, CNC machine tools, semiconductor equipment, packaging machinery, conveyor systems, and other applications requiring precision linear guidance. The catalog provides mounting-hole dimensions, carriage dimensions, basic load ratings, and moment ratings for each size to help users select the right model for their load requirements.

WERB Series Linear Guideway

WERB Series Linear Guideway

The WERB Series Linear Guideway is a high-precision linear motion component consisting of a carriage, guide rail, steel balls, bolt caps, and grease nipples. Featuring an HG-style body, this series offers high rigidity, a high load capacity, and smooth motion. It is suitable for linear reciprocating applications in automation equipment, precision processing machinery, and industrial machinery. The product is easy to install and maintain and offers a long service life, meeting a range of load and precision requirements. Since the catalog provides limited information, specific dimensions, precision grades, and load parameters are not listed in detail and should be confirmed when selecting a model for the application.

HG Series Non-Interchangeable Linear Guideway

HG Series Non-Interchangeable Linear Guideway

The HG Series Non-Interchangeable Linear Guideway is a precision linear motion component widely used in automation equipment, machine tools, semiconductor equipment, and other applications. The series is available with three block types: flange (W), square (H), and low-profile square (L). Sizes include 15, 20, 25, 30, 35, 45, 55, and 65. Load ratings are available in heavy-duty (C) and super-heavy-duty (H) configurations. The model code consists of several elements, including block mounting method, rail type, rail length, dust protection, precision grade, preload, and special rail processing. Precision grades include C, H, P, SP, and UP; preload codes are Z0, ZA, and ZB. The product offers high rigidity, low friction, and high positioning accuracy. Depending on installation requirements, blocks can be mounted from above or below, and optional dust protection includes self-lubricating or metal end-cap designs. Rail length can be specified to suit the application, making the guideway suitable for high-precision linear motion.

EG Series Linear Guideways

EG Series Linear Guideways

The EG Series linear guideway is a ball-recirculating linear guide. Its rolling circulation system consists of a slider, guide rail, end caps, steel balls, and ball retainers. It also features a lubrication system with grease nipples and oil-pipe fittings, as well as dust-protection components such as oil scrapers, bottom seals, guide-rail bolt caps, and metal scrapers. Products are available in non-interchangeable versions (slider and guide rail supplied as a matched set) and interchangeable versions (slider and guide rail can be ordered separately); interchangeable guide rails can also be ordered on their own. Slider styles include the W flange type and H square type. Five sizes are available: 15, 20, 25, 30, and 35. Load classes include C heavy load and S medium load, with simplified model codes such as EGH-SA and EGH-CA. Guide-rail mounting options include R/U top mounting and T bottom mounting. Dust-protection options include standard oil scrapers with dust seals, ZZ with metal scrapers, KK with double oil scrapers and metal scrapers, and DD with double oil scrapers. When multiple guide rails are used on the same axis, Roman numerals such as II and III indicate the number of rails.

FLE Series Roller Linear Guides

The FLE series consists of heavy-duty roller linear guides that use rollers as rolling elements. They offer high rigidity, high load capacity, and impact resistance, making them suitable for linear guidance in machine tools, automated production lines, and heavy-load handling equipment. The catalog provides dimensional drawings for nominal sizes 40, 60, 80, 90, and 125. The model suffix L denotes an extended block, while -2 denotes a two-block or double-row configuration. Select according to the available mounting space, load, travel, and accuracy grade.

LZJ Series Linear Guide Rails

Page 174 of the catalog provides dimensional drawings for the LZJ1016 and LZJ1622 linear guide rails. The series provides linear guidance and load support in automation equipment. When selecting a model, confirm the dimensions based on the available installation space, rail width, carriage or rail length, and load conditions. This page shows external dimensions only; detailed specifications such as accuracy class, load rating, and material are not listed. Refer to the dimension tables in the complete catalog for details.

BRH Series Linear Guides

BRH Series Linear Guides

The BRH series consists of high-profile (international standard) linear guides. The same numbering system also covers BRH high-profile, BRS low-profile, BRX special-size, and BCH/BCS/BCN thin-strip carriage types (with retaining chain). The model number is formed by combining, in order, the carriage type, size number (such as 20/25/30), flange type (flanged with threaded holes A, flangeless with threaded holes B, or flanged with through holes C, with extended AL/BL/CL and short AS/BS/CS versions), number of carriages per rail, accuracy grade (N/H/P/SP/UP), preload (ZF slight clearance, Z0 zero clearance, Z1 light preload, Z2 medium preload, Z3 heavy preload), accessory codes (top and side dust seals, metal scraper plates, double dust covers, and single/double-sided locking clips), special rail treatments or machining (blackening, hard chrome plating, phosphating, electrolytic nickel plating, specially machined holes, and reverse-drilled holes), rail length (L followed by a number), and the II designation for two rails on one axis. When selecting a replacement, check that the five dimensions—assembly height H, assembly width W2, carriage assembly length L, rail width W1, and rail hole pitch F—match, to

BRS Series Linear Guideways

BRS Series Linear Guideways

The BRS series is a low-profile linear guideway with a reduced carriage height, making it suitable for installations with limited space. It uses four rows of load-bearing balls to provide high rigidity and precision. The model code specifies the carriage type, size, flange type, number of guide rails, accuracy grade, preload, accessory code, special rail machining, and rail length. Five accuracy grades are available: N, H, P, SP, and UP. Five preload grades are available: ZF, Z0, Z1, Z2, and Z3. Flange types include A, B, C, AL, BL, CL, AS, BS, and CS, offering mounting options for a range of equipment.

BRX Series Linear Guideways

BRX Series Linear Guideways

BRX is a linear guideway series with specially sized blocks. The series designation consists of the block type, size number, flange type, number of guide rails per axis, accuracy grade, preload, accessory code, special rail machining, rail length, and use of 2 guide rails on a single axis. Flange options include flanged and non-flanged, extended and short, and combinations of through-holes and threaded holes. Accuracy grades include normal, high, precision, super precision, and ultra precision. Preload ranges from slight clearance to heavy preload. Accessories include dust protection, scrapers, double dust covers, and grease nipples. Rails can be blackened, hard chrome plated, phosphated, nickel electroplated, or supplied with specially machined or reverse-drilled holes. Suitable for linear motion mechanisms requiring special mounting dimensions.

BCH Series Linear Guides

BCH Series Linear Guides

The BCH series consists of thin-strip, high-profile linear guides (International Standard with cage). Their recirculating ball design uses a ball cage and provides high load capacity and running accuracy, making them suitable for linear guidance in automation equipment and precision machinery. The product number consists of 10 segments: carriage type, size code, flange type, number of carriages per rail, accuracy grade, preload, accessory code, special rail processing, rail length, and single-axis use designation. Accuracy grades are normal N, high H, precision P, super precision SP, and ultra precision UP. Preload options are slight clearance ZF, zero clearance Z0, light preload Z1, medium preload Z2, and heavy preload Z3. Flange types include A/B/C, extended AL/BL/CL, and short AS/BS/CS. Accessory codes A~U cover options such as dust caps, metal scrapers, and locking clips. Special rail processing includes blackening, chrome plating, phosphating, electrolytic nickel plating, specially machined holes, and reverse-drilled holes.

BCS Series Linear Guides

BCS Series Linear Guides

The BCS series is a low-profile, thin-strip linear guide with a cage, part of the BRH/BRS/BRX/BCH/BCS/BCN linear guide family. The carriage uses a cage to retain the steel balls as they recirculate, delivering smoother, quieter operation and longer service life. Its low-profile construction reduces installation height, making it suitable for precision linear motion applications with noise and space constraints. The ordering designation consists of 10 code segments: carriage type (BCS), size number, flange type, number of carriages per rail, accuracy grade (N/H/P/SP/UP), preload grade (ZF/Z0/Z1/Z2/Z3), accessory code, special rail machining, rail length (L+length, mm), and an identifier for two rails used on a single axis. These products are widely used in CNC machine tools, semiconductor equipment, automated production lines, measuring instruments, and other precision linear motion applications.

BCN Series Linear Guideways

BCN Series Linear Guideways

The BCN series consists of ultra-low-profile linear guideways with a sealing strip and an integrated ball cage. The carriage assembly height is lower than that of a conventional guideway of the same size, making it suitable for space-constrained automation equipment and miniature mechanisms. The cage separates and guides the steel balls as they recirculate, providing low friction, smooth operation, low noise and long service life. The sealing strip blocks contaminants and reduces grease leakage. The series offers flanged threaded, non-flanged threaded and flanged through-hole types, as well as various extended (AL/BL/CL) and short (AS/BS/CS) flange styles. Accuracy grades include N standard, H high, P precision, SP super precision and UP ultra precision. Preload options are ZF slight clearance, Z0 zero clearance, Z1 light preload, Z2 medium preload and Z3 heavy preload. Optional accessories include top and side dust seals, metal scrapers, double dust seals and lubrication grooves on one or both sides. Rails can be supplied with black oxide, hard chrome, phosphate or electrolytic nickel finishes, as well as specially machined holes and reverse-drilled holes. Rail lengths are customized to travel requirements, and two rails can be configured on a single axis.

BCH-A & AL Ball Chain Linear Guideways

BCH-A & AL Ball Chain Linear Guideways

The BCH-A & AL series consists of ball chain (BC) linear guideways with a ball chain retention system, a high-profile flange-mounted design, and dimensions compliant with international standards. The chain prevents balls from falling out and reduces friction and noise for smoother carriage travel. These guideways are suitable for linear motion applications in automation equipment, machine tools, electronics manufacturing, material handling, and precision positioning. The series includes BCH-A and BCH-AL carriage types, with specifications selected according to assembly, carriage, and rail dimensions.

BCH-B & BL Series Ball Chain Linear Guides

BCH-B & BL Series Ball Chain Linear Guides

The BCH-B and BL series are ball chain linear guides with a flangeless design and internationally standardized mounting dimensions. A retaining chain controls ball recirculation, keeping the balls evenly spaced inside the carriage and preventing them from pressing against or rubbing against one another. This reduces rolling resistance and noise while improving recirculation stability and service life at high speeds. The series is supplied in high assembly accuracy grades and is suitable for automation equipment, machine tools, electronics assembly, handling systems, and other applications requiring quiet, high-precision linear guidance. Complete selection depends on the nominal carriage and rail size (cross-sectional dimensions), accuracy grade, preload grade, rail length, and mounting hole spacing. Refer to the dimensional tables in the catalog for specific specifications.

BCN Series Ball Chain Linear Guides

BCN Series Ball Chain Linear Guides

The BCN series consists of ball chain linear guides, including the standard BCN-A and extended BCN-AL models. They feature flange mounting, an ultra-low assembly height, and a high-rigidity structure. The ball chain retains the balls for long service life, very high linear speeds, and quiet operation. The catalog covers sizes 25, 30, 35, and 45, with assembly height H of approximately 31~63 mm, assembly width W of approximately 72~140 mm, and a maximum reference length of 4000 mm. It also specifies dynamic and static load ratings, allowable static moments, and weights. Suitable for automation equipment, precision positioning, machine tools, and high-speed linear motion systems.

BCN-B & BL Series Ball-Chain Linear Guides

BCN-B & BL Series Ball-Chain Linear Guides

The BCN-B & BL series consists of ultra-low-profile ball-chain linear guides with a flangeless BC block design. They are available in standard B and extended BL versions. The ball retainer keeps the steel balls rolling in an orderly manner during recirculation, providing long service life, ultra-high linear speeds, and low noise. Five sizes are available: 25, 30, 35, 45, and 55, with heights H of 31~63mm and widths W of 48~100mm. Basic dynamic load ratings range from 3030~15500 kgf and static load ratings from 5040~24900 kgf. Allowable static moments are specified in the Mx/My/Mz directions, and maximum rail length is 4000mm. These guides are suitable for high-speed, high-precision, low-noise linear motion in automated equipment.

BCS-B & BL Series Low-Profile Linear Guides with Ball Chain

BCS-B & BL Series Low-Profile Linear Guides with Ball Chain

The BCS-B & BL series consists of low-profile linear guides with ball chain retainers that prevent the steel balls from falling out during operation. They offer a low mounting height, high rigidity, low noise and high-precision linear motion. The series includes BCS-B and BL models, both with flangeless mounting designs, suitable for automation equipment, precision machine tools, semiconductor equipment and other applications with limited mounting height and demanding motion accuracy requirements. Refer to the catalog tables for dimensions, load ratings, accuracy grades and other specifications.

BR Series Linear Guideways

BR Series Linear Guideways

BR series linear guideways are available in high- and low-profile, flanged and non-flanged, and through-hole and threaded-hole configurations. Common variants include BRH-A/AL, BRH-B/BL, BRS-B/BL/BS, BRH-C/CL and BRX-B/BL. The catalog defines specifications using parameters such as assembly dimensions H/W/W2/E, block dimensions L/B×J, rail dimensions W1/H1/F, and mounting hole dimensions d×D×h. BRX25B/BRX25BL are non-flanged models with special dimensions: assembly height 36 mm, assembly width 48 mm, block length 88 mm, oil hole M6×1, maximum rail length 4000 mm, dynamic load rating 2140 kgf and static load rating 4000 kgf. They are suitable for linear guidance in automation equipment, machine tools, conveyors and similar applications.

BRS-B Series Linear Guideways

BRS-B Series Linear Guideways

The BRS-B series is a low-profile, flangeless carriage type in the BR series of linear guideways. Like the BL and BS series, it belongs to the low-profile linear guideway family. Its carriage has a low cross-sectional height and no flange on the mounting surface, making it suitable for height-sensitive, space-constrained applications requiring mounting from the side or above. It is commonly used for linear guidance in automation equipment, compact positioning stages, inspection mechanisms, and material handling systems. Product specifications are organized into two categories: assembly dimensions and carriage dimensions. Assembly dimensions include rail width, assembled carriage and rail height, and mounting hole spacing. Carriage dimensions include length, width, height, mounting thread specifications, and hole spacing. Select the carriage size according to load, moment, and accuracy requirements, and cut the rail to length according to the required travel. The catalog page provided contains only table headers and repeated column headings; the dimensional values for specific models are missing. Refer to the complete catalog table for actual model codes and dimensions.

BL Series Linear Guideways

BL Series Linear Guideways

The BL series consists of low-profile, flangeless linear guideways that share a common dimensional system with the BRS-B and BS subseries in the same catalog. Their low assembly height allows them to be mounted directly on a low mounting surface, making them suitable for applications with strict overall height limits. The catalog provides tables of assembly dimensions (mm) and carriage dimensions (mm) for each model, including rail width, assembly height, carriage length and width, mounting hole spacing, and rated dynamic and static loads. These values can be used to compare available installation space and load capacity when selecting a model. The main differences between submodels in the series are whether the carriage has a flange, the assembly height, and the mounting hole layout. Select a model based on load, travel, accuracy grade, and assembly height, then specify the required rail length separately.

BR Series Linear Guideways

BR Series Linear Guideways

The BR Series linear guideway is a low-profile, flangeless linear guide assembly. The catalog distinguishes three block configurations: BRS-B, BL and BS. All feature a low-profile, flangeless design suitable for automated equipment with limited installation height and a need for compact layouts. Selection is primarily based on two sets of parameters: assembly dimensions and block dimensions. Assembly dimensions describe the overall height, width and other external dimensions of the assembled rail and block. Block dimensions describe the block's length, width, height, mounting hole spacing, and interfaces for lubrication and dust protection accessories. The series is typically available with blocks and rails in different accuracy and preload grades, and rails can be cut to suit the required travel length. This catalog page consists mainly of dimensional tables, with the heading “Block Dimensions (mm)” repeated across the columns. The numerical values were lost during OCR, so this entry retains only basic information about the series and block submodels. For actual selection, refer to the dimensional tables in the original catalog or the product drawings.

BR Series Linear Guides

BR Series Linear Guides

BR series linear guides are ball-type linear guides, represented in the catalog by the BRS-A and BRS-AS low-profile flanged carriage models. Steel balls recirculate between the rail and carriage, providing low friction and high positioning accuracy. The guides can support loads in four directions: radial, reverse radial and both lateral directions. They are suitable for linear guidance in automation equipment, precision machine tools, and semiconductor and electronics manufacturing equipment. Specifications are organized into three categories: assembly dimensions (mm), carriage dimensions (mm) and rail dimensions (mm). The catalog lists values for each size, including assembly height and width, carriage length, mounting hole spacing, rail width and thickness, and dynamic and static load ratings, making it easy to check mounting interfaces and load capacity during selection. The flanged carriage can be bolted down from above, while the low-profile design reduces overall machine height and saves installation space. Rails can be cut to suit the required travel or supplied in standard lengths, and multiple rails can be joined end to end.

OSG/ISG Series Dual-Shaft Linear Guides

OSG/ISG Series Dual-Shaft Linear Guides

OSG/ISG series dual-shaft linear guides feature two cylindrical rails and four- or six-wheel carriages. They are available in external (OSG) and internal (ISG) series. Multiple roller bearings built into the carriage roll along the rails, providing low friction, smooth operation, high rigidity and strong load capacity. They are widely used in linear guidance and slide mechanisms for automation equipment, woodworking machinery, cutting machines and packaging machinery. The OSG series ranges from OSG6 to OSG100N, while the ISG series ranges from ISG10 to ISG35. Key specifications include combined height H, combined width W, rail width W1, rail height H2, shaft diameter D, rail pitch P, rail mass per unit length Mr (g/m), carriage width, height and length, mounting bolt size S, and roller/bearing quantity Qp. The OSG100 and OSG100N use a double oblique rail configuration, with a transverse spacing of 78mm and a longitudinal pitch of 120mm.

ISG Series Linear Guides

ISG Series Linear Guides

ISG series linear guides feature a four-row ball contact design for high rigidity, load capacity, and precision. Available in sizes 10, 15, 20, 25, and 35, they offer rail widths from 28mm to 100mm and assembly heights from 23mm to 60mm. Standard (N), extended, and other block types accommodate a range of travel and load requirements. Applications include automated equipment, CNC machine tools, and precision measuring instruments.

EG Series Linear Guideways

EG Series Linear Guideways

EG Series linear guideways are designed for linear motion in industrial automation equipment. The range includes the EGH-SA, EGH-CA, EGW-SA, and EGW-CA subseries. Manufactured to high-precision standards, these guideways offer high rigidity, low friction, and long service life, making them suitable for a wide range of precision positioning and conveying applications. They are available in multiple sizes, with a broad range of dynamic and static load ratings to meet different load requirements. For mounting dimensions and performance specifications, see the catalog dimension tables.

MGN Miniature Linear Guide Rail Series

MGN Miniature Linear Guide Rail Series

The MGN miniature linear guide rail series features high-precision, low-friction linear motion components designed for applications such as compact automation equipment, precision instruments, and medical devices. The series is available in a range of sizes, including MGN5, MGN7, MGN9, and MGN12. Each size comes in C and H accuracy grades to meet different load and rigidity requirements. Made from high-quality steel, the rails feature compact carriages, high rigidity, low noise, and a long service life. Standardized mounting dimensions make replacement and maintenance easy.

CSXW Series Linear Guides

CSXW Series Linear Guides

CSXW series linear guides are available in sizes 25 and 32, each with a choice of travel lengths (10mm, 20mm, 30mm, 40mm, 50mm, 75mm, 100mm, etc.) and corresponding mounting dimensions S, SS, ZZ, and Z. Designed for precision linear motion applications, the series offers a range of lengths. See the specification table for detailed dimensions.

SBR Series Linear Slide Units

SBR Series Linear Slide Units

SBR series linear slide units consist of a slide block and a support shaft. The slide block works with a linear bearing to provide low-friction linear motion. Slide block models range from SBR16LUU to SBR50LUU, while support shaft models include SBR12 to SBR50 and TBR16 to TBR30. Available in a range of shaft diameters (Φ12–Φ50 mm), the slide blocks have basic load ratings of 1,548–7,640 N (dynamic) and 2,360–15,880 N (static). Support shafts are available in standard lengths up to 6,000 mm. Suitable for linear guide systems in automation equipment, machine tools, industrial robots, and other applications.

TBR Linear Slide Unit Series

TBR Linear Slide Unit Series

The TBR series is a support rail range for linear slide units, suitable for applications such as automation equipment and machining. It includes four models: TBR16, TBR20, TBR25, and TBR30, with shaft diameters of 16 mm, 20 mm, 25 mm, and 30 mm, respectively. Rails are available in various standard lengths (such as 190, 340, 640, and 940 mm), with a maximum supported length of 6,000 mm. The rails have a trapezoidal cross-section and fixed mounting-hole spacing (N = 20 or 25 mm; P = 150 or 200 mm), and weigh 2.56–8.28 g per meter. When paired with TBR...UU or SCJ...UU blocks, they provide high-precision linear motion. Made from bearing steel with a hardened surface, the rails offer high rigidity and wear resistance.

SYX Series Precision Linear Guide Rails

SYX Series Precision Linear Guide Rails

The SYX Series Precision Linear Guide Rail is a high-precision linear motion component designed for automated machinery, material-handling equipment, machine tools, and other applications. It is available with multiple assembly heights (H/S/X), sizes (15–65), flange types (BN/BL/BE/BS/FN/FS/FL/FE), dust-protection classifications, and preload grades (ZF/ZO/Z1/Z2/Z3) to meet various load and accuracy requirements. A wide range of rail lengths is available, with configurations supporting 1–3 blocks per rail and multiple rails installed in parallel on the same plane. Multiple anti-corrosion surface-treatment options are available. Accuracy grades include C/H/P/SP/UP. The clear coding system enables quick identification of each parameter through an alphanumeric combination.

Cylindrical Linear Guide Shaft Series

Cylindrical Linear Guide Shaft Series

The cylindrical linear guide shaft series includes standard (GF, TF), chrome-plated (GD, TD), and stainless steel (FS) subseries. Shafts are made of GCr15 or 45# high-carbon steel, with a hardness of HRC 62+2 (45#: HRC 58), a surface hardening depth of 0.8–2.5 mm, surface roughness of 0.8–1.6S, straightness of 80 μm/1000 mm, and roundness of no more than 3.0 μm. Solid and hollow linear shafts are available. Solid shaft sizes are compatible with all of our linear bearings; hollow shafts are available only in diameters greater than 12 mm. Shaft diameters range from 3 mm to 80 mm, with a G6 tolerance grade. Special shafts with threaded holes are available for connection to support rails.

TF Series Precision Shaft

TF Series Precision Shaft

The TF series cylindrical linear guide shafts (precision shafts) are made from GCr15 or 45# high-carbon steel, with a hardness of HRC 62 (+2) (HRC 58 for 45# steel). The case-hardening depth is 0.8–2.5 mm, surface roughness is 0.8–1.6 S, straightness is 80 μm per 1,000 mm, and roundness is no greater than 3.0 μm (Rmax). Solid and hollow shafts are available. Solid shafts range from Φ3 to Φ80 (G6 tolerance); hollow shafts are available only in diameters over 12 mm. Custom shafts can also be made, such as versions with threaded holes for connection to support rails. Designed for use with a range of linear bearings, these shafts provide a high-precision, long-life linear motion solution.

AR Series Linear Guides

AR Series Linear Guides

The AR Series is a range of linear guides. The catalog page presents mounting and overall dimensions in an “Overall Dimensions” table, making it easy to check rail widths, mounting hole spacing, and block dimensions for automated equipment. The OCR output for this page retains only the series title and part of the table structure; it does not provide complete model codes, accuracy grades, lengths, or load ratings. Refer to the complete catalog data when selecting a model, and choose the appropriate specification based on installation space and load requirements.

TD Series

TD Series

The TD Series comprises chrome-plated cylindrical linear guide shafts (linear shafts), part of the company’s range of cylindrical linear guides. Made from GCR15 or 45# high-carbon steel, they have a hardness of HRC 62+2 (45#: HRC 58), a surface-hardened layer 0.8–2.5 mm thick, surface roughness of 0.8–1.6S, straightness of 80 μm/1,000 mm, and roundness no greater than 3.0 μm (Rmax). Solid and hollow shafts are available. The solid shafts cover the full size range of the company’s linear bearings, while hollow shafts are available only in diameters greater than 12 mm. Shaft diameters range from Φ3 mm to Φ80 mm, with a G6 tolerance grade. They are suitable for linear motion applications requiring high-precision guidance and corrosion resistance.

FS Series Cylindrical Linear Guide

FS Series Cylindrical Linear Guide

The FS Series stainless steel cylindrical linear guide (smooth shaft) is designed for corrosive environments. Made of stainless steel, it has a hardness of HRC 62+2, a surface hardening depth of 0.8–2.5 mm, surface roughness of 0.8–1.6S, straightness of 80 μm/1000 mm, and roundness of no more than 3.0 μm. Shaft diameters range from Φ3 to Φ80 mm. Solid and hollow shafts are available, with custom lengths. Used with linear bearings, it provides high-precision linear motion.

LGB Series Slider Blocks

LGB Series Slider Blocks

LGB series linear guide blocks with a 12 mm shaft diameter are available in three block lengths: 60 mm, 100 mm, and 140 mm. The basic dynamic load rating (C) ranges from 140 to 180 kgf, the basic static load rating (To) ranges from 4.3 to 5.4 kgf·m, and the allowable static moment (Tx) ranges from 3.2 to 7.2 kgf·m. Designed for precision linear motion in industrial automation equipment, they offer high rigidity and precision.

SYX-SN Series Linear Guide Rails

SYX-SN Series Linear Guide Rails

The SYX-SN series linear guide block assemblies are available in a range of widths (7, 9, 12, and 15 mm), with matching blocks and rails for applications requiring linear motion, such as automation equipment, precision machinery, and machine tools. They offer high rigidity and load capacity in a compact, easy-to-install design. Dimensions include assembly width and height, block length and width, and mounting hole spacing; select the appropriate specifications by model.

SYX-SL Series Linear Guide Rails

SYX-SL Series Linear Guide Rails

The SYX-SL series comprises linear guide rail and slider assemblies for factory automation. It includes the SYX-SN and SYX-SL subseries, with a range of models such as SYX7, SYX9, SYX12, and SYX15. Designed for precision linear guidance in automated equipment, the series offers slider assemblies in various sizes and load capacities. For specific details, including assembly and slider dimensions, please refer to the product catalog.

SD Series Linear Guide Mounting Kit

SD Series Linear Guide Mounting Kit

SD Series linear guide mounting kits are designed for SD25, SD38, and SD45 linear guides. A range of Bi and XXX size combinations is available to meet different installation requirements. Product codes follow the format SD.3.xxx.xxx: SD indicates the series, 3 indicates the type, and the following numbers correspond to the XXX and Bi dimensions, respectively. The mounting kit ensures proper installation and alignment of the guide rail and carriage, improving system rigidity and precision.

HL Series Linear Guideways

HL Series Linear Guideways

HL series linear guideways are available in three accuracy grades: Normal (C), High (H), and Precision (P). Sizes include HL-15, HL-20, HL-25, HL-30, HL-35, HL-45, and HL-55. Height and width tolerances vary by accuracy grade, making them suitable for guiding linear motion in automation equipment.