Rotary Table Bearing

ERTS Series High-Speed Bearings

BRT Series Rotary Table Bearings

BRT series rotary table bearings are high-precision, high-load-capacity, high-rigidity bearings designed for CNC machine-tool rotary tables. They consist of a thrust/radial ring, a thrust/radial shaft ring, a thrust washer, two needle-roller cage assemblies, and a set of radial cylindrical rollers, forming a cylindrical roller bearing that combines axial and radial loads. The bearing rings feature evenly spaced mounting screw holes. These bearings offer high axial and radial load capacity, high tilting rigidity, and exceptional rotational accuracy, making them suitable for rotary tables, chucks, milling heads, and measuring and testing equipment. This series requires high precision in mating components, and the tightening torque of the mounting screws must be controlled during installation. The range covers BRT50 to BRT1200, with bore diameters of 50–1200 mm and outside diameters of 126–1490 mm. It also specifies machining tolerances for the corresponding shaft diameters and housing bore diameters, as well as roundness, perpendicularity, parallelism, and surface roughness. The BLDF (high-speed) and BRTM (integrated angle measurement/steel scale) variants in the same family use the same mounting dimensions and precision standards.

BRTS/BRTM/BLDF Series Rotary Table Bearings

This product family of rotary table bearings includes three types: BRTS, BRTM, and BLDF. BRTS rotary table bearings have exactly the same overall dimensions, mounting dimensions, and accuracy as BRT bearings. Their radial rollers are fitted with nylon cages to support high-speed rotation, offering a high limiting speed and low, stable friction torque. They are suitable for use with torque motors. BRTM bearings are BRT combined bearings with bidirectional thrust cylindrical rollers, fitted with a steel scale to monitor and adjust rotational accuracy in real time and ensure high-precision machine operation. BLDF axial-radial rotary table bearings feature low friction, high rotational accuracy, and a high limiting speed. They can withstand high axial and radial loads and offer high tilting rigidity, making them suitable for combined loads and precision applications. They are widely used in machine-tool rotary tables, turret heads, and measurement and testing equipment. During installation, ensure that the mounting surfaces are clean. Assembly forces must be applied only through the rings, and the locating screws should be tightened in a crosswise sequence. The starting friction torque is approximately 3–3.5 times the value specified in the dimension table.

BRTM Series Rotary Table Bearings

The BRTM series consists of combined rotary table bearings with bidirectional thrust cylindrical roller bearings. Based on BRT rotary table bearings, a steel grating scale is added to create a rotary table bearing with an integrated angular measurement system. It monitors and adjusts the rotational accuracy of the combined bidirectional thrust cylindrical roller bearing in real time, ensuring high-precision machine operation. This series has the same overall dimensions, mounting dimensions, and accuracy standards as BRT bearings. It is suitable for applications requiring high angular and rotational accuracy, such as direct-drive torque motors, machine tool rotary tables, boring bars/grinding heads, and measuring and testing equipment. The range covers BRTM150 to BRTM460, with bore diameters of 150–460 mm, outside diameters of 240–600 mm, and overall heights of 40–70 mm. Each size is supplied to the listed specifications for overall dimensions, mounting-hole positions, rated loads, and friction torque.

BLDF Series Rotary Table Bearings

BLDF series axial-radial rotary table bearings are precision bearings designed to withstand high axial and radial loads while providing high tilting stiffness. They feature low friction, high rotational accuracy, and a high limiting speed. Suitable for combined loads and precision applications, they are widely used in machine-tool rotary tables, honing heads, and a variety of measuring and testing equipment. The catalog lists 13 sizes: BLDF50, BLDF80, BLDF100, BLDF120, BLDF150, BLDF180, BLDF200, BLDF260, BLDF325, BLDF395, BLDF460, BLDF580, and BLDF650. During installation, keep the mating surfaces and installation environment clean. Do not transmit assembly forces through the rolling elements. Tighten the locating screws in a crisscross pattern using a torque wrench.

BRT Series Rotary Table Bearings

BRT Series rotary table bearings are high-rigidity, high-precision rotary positioning bearings with mounting holes in both the inner and outer rings. Their design is similar to that of YRT-type rotary table bearings. They are commonly used in applications subject to combined axial and radial loads, such as CNC rotary tables, indexing devices, precision rotary tables, and large rotary assemblies. The series is sized by nominal bore diameter d, ranging from d=50 to 1200 mm; the corresponding outer diameter D is approximately 126–1490 mm, and bearing height H is approximately 30–164 mm. The catalog also lists parameters such as inner- and outer-ring mounting holes, lifting holes, pitch, tightening torque, friction torque, P4/P2 rotational accuracy, and limiting speed with grease lubrication. Model weights range from approximately 1.6 kg to 450 kg. Select the appropriate model based on mounting dimensions, load capacity, and precision requirements.

EFRT Series Rotary Table Bearings

EFRT Series Rotary Table Bearings

The EFRT series comprises precision rotary table bearings, including the ERTS variant, for applications such as machine tool rotary tables, indexing tables and CNC rotary tables that must simultaneously support axial loads, radial loads and tilting moments. Most bearings are supplied preloaded and use a combined axial and radial cylindrical roller arrangement. A reinforcing ring (VSP) can be added to increase shaft system rigidity. The model designation combines bore diameter, cage material (M for brass cage / TV for nylon cage), tight height tolerance (H1 or H1H2), mounting requirements or clearance (VSP for a reinforcing ring, RL0 for reduced preload, blank for the normal standard), and runout accuracy class (P4 / P2). Dimensional tolerances are uniformly specified to P5. Bore sizes range from 50~1200 mm, with an operating temperature of -30℃~+120℃ (-20℃~+80℃ recommended for precision equipment). An H5 shaft tolerance and J6 housing tolerance are recommended, using a transition fit.

EFRT/ERTS Series Turntable Bearings

EFRT/ERTS Series Turntable Bearings

EFRT/ERTS series turntable bearings are high-rigidity precision turntable bearings (slewing bearings) with mounting holes in the inner and outer rings. They are used in machine tool rotary tables, indexing tables, vertical-to-horizontal conversion heads, and other applications requiring simultaneous support of axial loads, radial loads, and tilting moments. The bearings are generally supplied preloaded. Transition fits are recommended for the shaft and bearing housing (shaft tolerance h5 and housing tolerance J6). Radial clearance is under preload; VSP, RL0, and the standard version refer only to axial clearance. Brass cages (M) or nylon cages (TV) are available. Height tolerances are available in the tighter H1 or H1H2 grades. Mounting configurations include VSP with a reinforcing ring, RL0 with reduced preload, and the standard version. Runout accuracy is available in P4/P2; dimensional tolerances for all bearings conform to P5. Bore diameters range from 50~1200mm, and the operating temperature is -30℃~+120℃. Actual friction torque is approximately 2~2.5 times the static value in the table (approximately 1.5 times for the high-speed type).

EFRT Series Bearings

EFRT Series Bearings

EFRT series bearings are medium- to large-sized bearings with mounting screw holes in the end faces of the inner and outer rings. The 17 sizes cover bore diameters of 50~1200mm, outside diameters of 126~1490mm and bearing heights of 30~164mm. The catalog specifies five dimensions: bore diameter, outside diameter, bearing height, height 1 and height 2. It lists unilateral negative tolerances for bore and outside diameters (e.g., 0/-0.008 for a 50mm bore and 0/-0.075 for a 1200mm bore), symmetric height tolerances (±0.250~±0.600), and normal and strict tolerance options for heights 1 and 2, allowing selection according to equipment accuracy requirements. Before installation, clean the parts and tools, then fit the bearing using a heater or dedicated mounting tool. Never apply force through the rolling elements or strike the non-fitted ring. Use a torque wrench to tighten the inner and outer ring end-face screws in a crosswise sequence, in three stages at 40%, 70% and 100% of the standard torque. Check installation accuracy with a dial indicator on a magnetic base, paying particular attention to the shoulder depth dimension. Bearings are supplied prefilled with grease according to the fit requirements. Oil lubrication can be used instead to suit the customer's operating conditions, in which case only rust-preventive oil is retained; different grades of