Model · EFRT Series Bearings

EFRT Series Bearings

EFRT series bearings are medium- to large-sized bearings with mounting screw holes in the end faces of the inner and outer rings. The 17 sizes cover bore diameters of 50~1200mm, outside diameters of 126~1490mm and bearing heights of 30~164mm. The catalog specifies five dimensions: bore diameter, outside diameter, bearing height, height 1 and height 2. It lists unilateral negative tolerances for bore and outside diameters (e.g., 0/-0.008 for a 50mm bore and 0/-0.075 for a 1200mm bore), symmetric height tolerances (±0.250~±0.600), and normal and strict tolerance options for heights 1 and 2, allowing selection according to equipment accuracy requirements. Before installation, clean the parts and tools, then fit the bearing using a heater or dedicated mounting tool. Never apply force through the rolling elements or strike the non-fitted ring. Use a torque wrench to tighten the inner and outer ring end-face screws in a crosswise sequence, in three stages at 40%, 70% and 100% of the standard torque. Check installation accuracy with a dial indicator on a magnetic base, paying particular attention to the shoulder depth dimension. Bearings are supplied prefilled with grease according to the fit requirements. Oil lubrication can be used instead to suit the customer's operating conditions, in which case only rust-preventive oil is retained; different grades of

Overview

EFRT series bearings are medium- to large-sized bearings with mounting screw holes in the end faces of the inner and outer rings. The 17 sizes cover bore diameters of 50~1200mm, outside diameters of 126~1490mm and bearing heights of 30~164mm. The catalog specifies five dimensions: bore diameter, outside diameter, bearing height, height 1 and height 2. It lists unilateral negative tolerances for bore and outside diameters (e.g., 0/-0.008 for a 50mm bore and 0/-0.075 for a 1200mm bore), symmetric height tolerances (±0.250~±0.600), and normal and strict tolerance options for heights 1 and 2, allowing selection according to equipment accuracy requirements. Before installation, clean the parts and tools, then fit the bearing using a heater or dedicated mounting tool. Never apply force through the rolling elements or strike the non-fitted ring. Use a torque wrench to tighten the inner and outer ring end-face screws in a crosswise sequence, in three stages at 40%, 70% and 100% of the standard torque. Check installation accuracy with a dial indicator on a magnetic base, paying particular attention to the shoulder depth dimension. Bearings are supplied prefilled with grease according to the fit requirements. Oil lubrication can be used instead to suit the customer's operating conditions, in which case only rust-preventive oil is retained. Do not mix different grades of grease. After long-term storage, run the bearing in again for 20~50 revolutions. During operation, replenishment with the same grade of grease every 6~12 months is recommended.

Product category: Power transmission components/Rolling bearings/Rotary table bearings

EFRT Series Bearings — Dimension drawing
EFRT Series Bearings — Selection specifications

Models & specifications

Model / NameHeight 1 (mm)Height 1 normal toleranceHeight 1 strict toleranceHeight 2 (mm)Height 2 strict toleranceHeight (mm)Height toleranceBore diameter (mm)Bore diameter toleranceOutside diameter (mm)Outside diameter tolerance
EFRT50 EFRT50 bearing (50mm bore)20±0.125±0.02510±0.02030±0.250500/-0.0081260/-0.011
EFRT80 EFRT80 bearing (80mm bore)23.35±0.150±0.02511.65±0.02035±0.300800/-0.0091460/-0.011
EFRT100 EFRT100 bearing (100mm bore)25±0.175±0.02513±0.02038±0.3501000/-0.0101850/-0.015
EFRT120 EFRT120 bearing (120mm bore)26±0.175±0.02514±0.02040±0.3501200/-0.0102100/-0.015
EFRT150 EFRT150 bearing (150mm bore)26±0.175±0.03014±0.02040±0.3501500/-0.0132400/-0.015
EFRT180 EFRT180 bearing (180mm bore)29±0.175±0.03014±0.02543±0.3501800/-0.0132800/-0.018
EFRT200 EFRT200 bearing (200mm bore)30±0.175±0.03015±0.02545±0.3502000/-0.0153000/-0.018
EFRT260 EFRT260 bearing (260mm bore)36.5±0.200±0.04018.5±0.02555±0.4002600/-0.0183850/-0.020
EFRT325 EFRT325 bearing (325mm bore)40±0.200±0.05020±0.02560±0.4003250/-0.0234500/-0.023
EFRT395 EFRT395 bearing (395mm bore)42.5±0.200±0.05022.5±0.02565±0.4003950/-0.0235250/-0.028
EFRT460 EFRT460 bearing (460mm bore)46±0.225±0.06024±0.03070±0.4504600/-0.0236000/-0.028
EFRT580 EFRT580 bearing (580mm bore)60±0.250±0.07530±0.03090±0.5005800/-0.0257500/-0.035
EFRT650 EFRT650 bearing (650mm bore)78±0.250±0.10044±0.030122±0.5006500/-0.0388700/-0.050
EFRT850 EFRT850 bearing (850mm bore)80.5±0.300±0.12043.5±0.030124±0.6008500/-0.05010950/-0.063
EFRT950 EFRT950 bearing (950mm bore)86±0.300±0.12046±0.030132±0.6009500/-0.05012000/-0.063
EFRT1030 EFRT1030 bearing (1030mm bore)92.5±0.300±0.15052.5±0.030145±0.60010300/-0.06313000/-0.080
EFRT1200 EFRT1200 bearing (1200mm bore)108±0.300±0.15056±0.050164±0.60012000/-0.07514900/-0.085

Dimensions & drawings

EFRT Series Bearings — Dimension drawing
EFRT Series Bearings — Dimension drawing

Original catalogs

EFRT Series Bearings — Catalog page
EFRT Series Bearings — Catalog page