Model · DNC Series Cylinders

DNC Series Cylinders

SNS DNC series standard cylinders are double-acting and use air filtered through an approximately 40μm filter. Bore sizes are 32, 40, 50, 63, 80, 100, and 125 mm. Various mounting accessories are available: the basic DNC model supports FA, FB, CA, CB, CR, LB, TC, FTC, TCM1, and TCM2; the DNCJ series is available in a basic version and with FA, LB, TC, ETC, TCM1, and TCM2 options. The catalog provides mounting dimensions such as A, AA, B, C, CA, E, F, and G for accessories including TC, FTC, TCM1, and TCM2 at each bore size. Users can select a mounting method based on bore size and allow sufficient installation space. Accessory mounting positions cannot be adjusted freely.

Overview

SNS DNC series standard cylinders are double-acting and use air filtered through an approximately 40μm filter. Bore sizes are 32, 40, 50, 63, 80, 100, and 125 mm. Various mounting accessories are available: the basic DNC model supports FA, FB, CA, CB, CR, LB, TC, FTC, TCM1, and TCM2; the DNCJ series is available in a basic version and with FA, LB, TC, ETC, TCM1, and TCM2 options. The catalog provides mounting dimensions such as A, AA, B, C, CA, E, F, and G for accessories including TC, FTC, TCM1, and TCM2 at each bore size. Users can select a mounting method based on bore size and allow sufficient installation space. Accessory mounting positions cannot be adjusted freely.

Product category: Pneumatic components/Standard cylinders

DNC Series Cylinders — Selection specifications
DNC Series Cylinders — Selection specifications
DNC Series Cylinders — Selection specifications

Additional information

DNC Series Cylinders — Product image
DNC Series Cylinders — Product image

Original catalogs

DNC Series Cylinders — Catalog page
DNC Series Cylinders — Catalog page