Model · PGJ Series Push-In Straight Connectors

PGJ Series Push-In Straight Connectors

The PGJ series push-in straight connector is a tube-to-tube fitting with push-in connections at both ends. It joins two metric pneumatic tubes directly to extend or adapt piping in pneumatic circuits, with no tools required for connection or disconnection. The series covers nominal tube diameters of φ4, φ6, φ8, φ10 and φ12, with 8 sizes in total (PGJ06-04 to PGJ12-10). The body outside diameter ΦD2 ranges from 10~17mm, L1 from 13.5~21mm, and the overall length L2 from 34~46mm. The model number consists of PGJ followed by two numbers indicating “large-end tube diameter-small-end tube diameter.” Select the model to match the outside diameter of the tube at each end. A PPGJ push-in plastic straight connector is also available in the same size range and dimensional system, allowing selection based on cost and operating conditions. The catalog table prints the model prefix as PGH; this is a typographical variation of PGJ.

Overview

The PGJ series push-in straight connector is a tube-to-tube fitting with push-in connections at both ends. It joins two metric pneumatic tubes directly to extend or adapt piping in pneumatic circuits, with no tools required for connection or disconnection. The series covers nominal tube diameters of φ4, φ6, φ8, φ10 and φ12, with 8 sizes in total (PGJ06-04 to PGJ12-10). The body outside diameter ΦD2 ranges from 10~17mm, L1 from 13.5~21mm, and the overall length L2 from 34~46mm. The model number consists of PGJ followed by two numbers indicating “large-end tube diameter-small-end tube diameter.” Select the model to match the outside diameter of the tube at each end. A PPGJ push-in plastic straight connector is also available in the same size range and dimensional system, allowing selection based on cost and operating conditions. The catalog table prints the model prefix as PGH; this is a typographical variation of PGJ.

Product category: Pneumatic components/Pneumatic fittings/Push-in fittings

PGJ Series Push-In Straight Connectors — Dimension drawing
PGJ Series Push-In Straight Connectors — Dimension drawing
PGJ Series Push-In Straight Connectors — Dimension drawing
PGJ Series Push-In Straight Connectors — Selection specifications
PGJ Series Push-In Straight Connectors — Selection specifications
PGJ Series Push-In Straight Connectors — Selection specifications

Models & specifications

Model / NameBody diameter (mm)Length l1 (mm)Length l2 (mm)Tube diameter large (mm)Tube diameter small (mm)
PGJ06-04 PGJ06-04 push-in straight connector (φ6-φ4)10163564
PGJ08-04 PGJ08-04 push-in straight connector (φ8-φ4)10133484
PGJ08-06 PGJ08-06 push-in straight connector (φ8-φ6)1215.53686
PGJ10-06 PGJ10-06 push-in straight connector (φ10-φ6)1216.841106
PGJ10-08 PGJ10-08 push-in straight connector (φ10-φ8)1417.542108
PGJ12-06 PGJ12-06 push-in straight connector (φ12-φ6)13.513.538.5126
PGJ12-08 PGJ12-08 push-in straight connector (φ12-φ8)1417.542.5128
PGJ12-10 PGJ12-10 push-in straight connector (φ12-φ10)1721461210

Dimensions & drawings

PGJ Series Push-In Straight Connectors — Dimension drawing
PGJ Series Push-In Straight Connectors — Dimension drawing
PGJ Series Push-In Straight Connectors — Dimension drawing
PGJ Series Push-In Straight Connectors — Dimension drawing
PGJ Series Push-In Straight Connectors — Dimension drawing
PGJ Series Push-In Straight Connectors — Dimension drawing

Original catalogs

PGJ Series Push-In Straight Connectors — Catalog page
PGJ Series Push-In Straight Connectors — Catalog page