Push-in Fittings

KJT Series T-Type Male Threaded Tee Fittings

KJT Series T-Type Male Threaded Tee Fittings

Release ring colors: gray, orange-red, black; plastic body colors: gray, black. Release ring colors: gray, orange-red, black. Plastic body colors: gray, black.

KQ2U Series U-Type Fittings

KQ2U Series U-Type Fittings

The KQ2U series consists of pneumatic push-in U-type fittings (U-type tees and manifold-style push-in tube fittings) for quickly splitting one air line into multiple lines or directly connecting tubes of the same or different diameters. These tool-free fittings come in three configurations: male-threaded, equal-diameter, and reducing U-type fittings. Compatible tube diameters are Φ4, Φ6, Φ8, Φ10, Φ12, and Φ16. Connection options include M5×0.8 and M6×1.0 metric male threads; 1/8, 1/4, 3/8, and 1/2 imperial threads; or 00 (equal-diameter tube connection) and 06 (reducing tube connection). Release rings are available in gray, blue, or black, and plastic bodies in gray or black, making it easy to distinguish lines by color. Simply insert the tube fully to lock it in place, and press the release ring to remove it. These fittings are suitable for quick assembly and routine maintenance of compressed air lines.

KJX Series U-Type Reducing Plug-In Fitting

KJX Series U-Type Reducing Plug-In Fitting

Release ring colors: gray, orange-red, or black. Plastic housing colors: gray or black. The air tube connection is made of C3604 brass.

SCA-G Series Throttle Valve - G Thread

SCA-G Series Throttle Valve - G Thread

PDJ Series Plug-In Side Tee

PDJ Series Plug-In Side Tee

TO-PG Series Straight Reducing Fittings

TO-PG Series Straight Reducing Fittings

The TO-PG series consists of push-in straight reducing fittings for connecting two coaxial pneumatic tubes of different outside diameters (metal, nylon or PU). The fittings have a metal tubular body with push-in gripping claws and O-ring seals at each end. Simply insert the tube to lock it in place, or press the release ring to remove it; no tools are required. The range covers ten reducing combinations, including φ6-φ4, φ8-φ4, φ8-φ6, φ10-φ6, φ10-φ8, φ12-φ8, φ12-φ10, φ14-φ10 and φ16-φ14. Key dimensions include L1 (overall length), S1 (large-end width across flats/release ring height), S2 (small-end width across flats/release ring height), D1 (large-end tube diameter) and D2 (small-end tube diameter). Related designs in the series include reducing tees (TO-PEG) and four-way cross fittings (TO-PZA), which can be combined with the straight fittings to build complex pneumatic circuits. They are suitable for compressed-air piping in automated equipment, fixtures and packaging machinery.

KJE Series Bulkhead Union

KJE Series Bulkhead Union

KCJ Series Straight Tube-to-Tube Connector

KCJ Series Straight Tube-to-Tube Connector

TO-PYG Series Y-Type Three-Way Reducing Fitting

TO-PYG Series Y-Type Three-Way Reducing Fitting

KQ2C Series Single-End Fittings

KQ2C Series Single-End Fittings

Release ring colors: gray, blue, black; plastic body colors: gray, black.

TO-PUG Series Straight Reducing Fitting

TO-PUG Series Straight Reducing Fitting

KQ-U Series Universal Thread Fittings

KQ-U Series Universal Thread Fittings

Can be installed in threaded ports with American NPT, Japanese PT, German PF, and British BSP threads. The base material is copper. Suitable for vacuum systems with a vacuum level below 100KPa. Suitable tube materials are nylon and PU. The X2 surface is nickel-plated to prevent the release of copper ions.

KJF Series Female Straight Connector

KJF Series Female Straight Connector

Release ring colors: gray, orange-red, and black.

SCA Series Throttle Valve

SCA Series Throttle Valve

KCE Series Female-Threaded Bulkhead Fittings

KCE Series Female-Threaded Bulkhead Fittings

KCE series female-threaded bulkhead fittings are KC series pneumatic push-in fittings designed to connect tubing through a panel or equipment wall. They have a female-threaded port at one end and a push-in tubing port at the other, and are secured to the panel with a locknut. They prevent air from flowing out of the fitting when the tubing is disconnected. The body is made primarily of steel with an ultra-hard surface treatment and does not release copper ions, making it suitable for clean environments sensitive to copper ions. The maximum operating pressure is 1.0MPa. The fittings are suitable for nylon and PU tubing and come standard with compression sealant. KC series products must be used with KCR tube insert fittings. Common applicable tube O.D. sizes range from φ4 to φ12mm, with thread sizes including M5×0.8, 1/8, 1/4, 3/8 and 1/2.

KCR Series Tube Insert Fittings

KCR Series Tube Insert Fittings

KQ2R Series Reducing Plug Connectors

KQ2R Series Reducing Plug Connectors

Release ring color options: gray, blue, or black. Plastic body color options: gray or black.

TO-PU Series Straight Connector

TO-PU Series Straight Connector

ARPC Series Pneumatic Push-in Straight Fittings

ARPC Series Pneumatic Push-in Straight Fittings

The ARPC series consists of pneumatic push-in straight fittings for quickly connecting 4 mm or 6 mm outside diameter tubing to threaded ports such as M5, R1/8, R1/4, R3/8 and R1/2. Model numbers combine the body size and thread specification, for example ARPC04-M5 and ARPC06-01. The catalog table lists D (compatible tube outside diameter), R (thread specification), and overall and mounting dimensions such as A, B, S and X, making it easy to check available space and port positions when selecting a fitting. The series is suitable for compressed air systems requiring frequent connection and disconnection or rapid assembly, and connects directly to matching threaded ports.

ARPL Series Push-In Elbow Fittings

ARPL Series Push-In Elbow Fittings

The ARPL series consists of L-shaped (90° elbow) push-in pneumatic tube fittings for connecting 4 mm and 6 mm outside diameter nylon or polyurethane tubing at a right angle to threaded ports on pneumatic components. One end has a push-in collet that allows the tube to be inserted or removed without tools by pressing the release ring. The other end is threaded, with common thread sizes including M5, R1/8 (code 01), R1/4 (code 02), R3/8 (code 03), and R1/2 (code 04). The model code is “ARPL + tube diameter code (04/06) + ‘-’ + thread code”. The series also includes design variants such as ARPL-G and ARPL-N. Select the fitting according to the tube outside diameter and the threaded port on the component. The fittings are suitable for compressed air. During installation, control the thread tightening torque and ensure that the retaining spring and release ring return fully to position to prevent air leaks.

FSPC Series Straight Push-in Fittings

FSPC Series Straight Push-in Fittings

FSPC series straight push-in fittings are pneumatic line connectors used to quickly connect PU or nylon tubing to male-threaded ports. Their straight-through design allows easy connection and disconnection, making them suitable for applications where air tubing must be replaced frequently. The compatible fluid is air only (no other gases or liquids). The operating pressure range is 0~1.0 MPa (150 psi), vacuum pressure is -100 kPa (-29.5 in.Hg), and operating temperature is 0~60℃ (32~140℉). Compatible tubing materials are PU and nylon. Models combine tubing outside diameter ΦD (4, 6, 8, 10, 12 mm) with thread sizes R1/8, R1/4, R3/8, R1/2. The model code is FSPC [tubing outside diameter]-[thread size]. The table lists dimensions including L1, L2, Φp and φ to help with selection and installation.

FRBMC Series Push-in Male Straight Fittings

FRBMC Series Push-in Male Straight Fittings

FRBMC series push-in male straight fittings provide quick connection and disconnection of pneumatic tubing to threaded ports. Each straight fitting has a push-in tube connection at one end and a male thread at the other. Suitable tube outside diameters are Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16 mm. Thread sizes include M5, M6, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8 and G1/2. The catalog provides overall and installation dimensions including ΦD, R, A, L, B, C and S to help select fittings by tube diameter and thread size. They are suitable for straight tube connections in pneumatic circuits on automated equipment.

PYJ Series Push-In Y Fittings

PYJ Series Push-In Y Fittings

The PYJ series push-in Y fittings are quick-connect fittings for pneumatic lines. They split one air line into two, providing branch connections between pneumatic components such as cylinders, air valves, and air preparation units. The range comprises five basic sizes based on tube outside diameter ΦD: 4, 6, 8, 10, and 12 mm (PYJ04, PYJ06, PYJ08, PYJ10, and PYJ12). Reducing and equal-diameter combinations are also available, including PYJ06-04, PYJ08-06, PYJ10-08, PYJ12-10, PYJ04-04, PYJ06-06, and PYJ08-08, facilitating connections between different tube sizes. The catalog specifies ΦD (tube outside diameter), ΦD1 (body outside diameter), ΦD2 (through-hole diameter), and lengths L1–L4 as the main dimensions. For example, PYJ04 has ΦD4, ΦD1 11.5 mm, ΦD2 3.2 mm, and L1 52.5 mm; PYJ12 has ΦD12, ΦD1 21.5 mm, ΦD2 4.2 mm, and L1 75.5 mm. Material, operating pressure, operating temperature, and other parameters are not specified on this page; actual

PGJ Series Push-In Straight Connectors

PGJ Series Push-In Straight Connectors

The PGJ series push-in straight connector is a tube-to-tube fitting with push-in connections at both ends. It joins two metric pneumatic tubes directly to extend or adapt piping in pneumatic circuits, with no tools required for connection or disconnection. The series covers nominal tube diameters of φ4, φ6, φ8, φ10 and φ12, with 8 sizes in total (PGJ06-04 to PGJ12-10). The body outside diameter ΦD2 ranges from 10~17mm, L1 from 13.5~21mm, and the overall length L2 from 34~46mm. The model number consists of PGJ followed by two numbers indicating “large-end tube diameter-small-end tube diameter.” Select the model to match the outside diameter of the tube at each end. A PPGJ push-in plastic straight connector is also available in the same size range and dimensional system, allowing selection based on cost and operating conditions. The catalog table prints the model prefix as PGH; this is a typographical variation of PGJ.

PLJ Series Push-In Elbow

PLJ Series Push-In Elbow

The PLJ series push-in elbow (90° push-in elbow) is a quick-connect fitting for pneumatic lines. It connects two plastic air tubes (PU, PE or nylon) at a 90° angle, allowing right-angle routing and compact piping. Five standard sizes are available by nominal tube diameter: ΦD4, ΦD6, ΦD8, ΦD10 and ΦD12. Reducing sizes, including PLJ06-04, PLJ08-06, PLJ10-08 and PLJ12-10, are also available for connecting tubes of different diameters. The catalog specifies seven overall and mounting dimensions—ΦD, ΦD1, ΦD2, L1, L2, L3 and L4—to help with selection and installation space checks. The fitting body is typically made of nickel-plated brass or engineering plastic, with an O-ring and retaining clip for tool-free connection, quick disconnection and repeated use. It is widely used in pneumatic piping for automated equipment, fixtures and robot end effectors.

PBJ Series Push-In Tee Fittings

PBJ Series Push-In Tee Fittings

PBJ series push-in tee fittings provide quick branch connections for pneumatic tubing. They are suitable for nylon or polyurethane tubing with outside diameters of 4, 6, 8, 10, and 12 mm. The push-in locking design allows tool-free installation. Equal and reducing sizes, such as PBJ06-04, accommodate branch connections between different tubing diameters. The catalog provides dimensions including ΦD, ΦD1, ΦD2, L1, L2, and L3 to help with tubing layout and clearance checks. These fittings are suitable for automated equipment, pneumatic control cabinets, and general industrial air systems.

PKJ Series Push-in Five-Way Fittings

PKJ Series Push-in Five-Way Fittings

The PKJ series consists of push-in five-way fittings for pneumatic tubing, with one inlet and four outlets for distributing a single air supply to multiple actuators or branch lines. Simply insert tubing of the specified outside diameter to lock and seal the connection. To disconnect, press the release ring; no tools are required. The series accommodates four tube outside diameters: Φ4, Φ6, Φ8, and Φ10. Reducing models, including PKJ06-04, PKJ08-04, PKJ10-06, and PKJ10-08, distribute air between tubes of different diameters. Key dimensions include tube diameters ΦD/ΦD1, overall length L, section lengths L1~L3, overall heights H1/H2, body diameter ΦD2, and mounting hole diameter ΦD3. These dimensions can be used to check installation space and tubing routing. The fittings are widely used in automated equipment, fixtures, packaging machinery, and pneumatic control circuits.

PXJ Series Push-In Five-Way Fittings

PXJ Series Push-In Five-Way Fittings

PXJ series five-way fittings provide push-in connections for pneumatic tubing, allowing multiple air lines to be connected and distributed quickly. They are easy to install and provide a reliable seal. They accommodate tubing with outside diameters of Φ4, Φ6, Φ8, Φ10 and Φ12 mm, with reducing sizes including PXJ10-04, PXJ10-06 and PXJ10-08. Dimensions are specified by ΦD (tube outside diameter), ΦD1~ΦD3 (outside diameters of the respective ports), and length parameters L, L1, L2 and L3. These fittings are widely used in pneumatic piping systems for automated equipment and pneumatic actuators.

SS Free-Swivel Push-in Pneumatic Fittings

SS Free-Swivel Push-in Pneumatic Fittings

SS free-swivel push-in pneumatic fittings convey compressed air and allow tubing to be connected or disconnected with a single push. They are suitable for polyurethane (PU) and nylon (PA) tubing. The PC type has an internal hexagonal socket, allowing more tubing to be arranged in a confined space. The PL and PT types have a swivel mechanism in the body for easy angle adjustment in multi-line installations. The threaded portion is fitted with an O-ring or uses a specially designed thread. Metric thread sizes are M3×0.5, M5×0.8, and M6×1.0; tapered pipe thread sizes are R1/8, R1/4, R3/8, and R1/2. Operating pressure is 0~150 PSI (0~9.9 kgf/cm², 0~990 kPa), negative pressure is -750 mmHg (-29.5 inHg), and operating temperature is 0~60 ℃. The fluid is limited to air. During installation, select a tool suited to the fitting's hex size and verify the thread type.

PC Series Push-to-Connect Fittings

PC Series Push-to-Connect Fittings

PC series push-to-connect fittings carry compressed air and allow tubing to be easily connected or disconnected in a single action. The PC type features an internal hexagonal socket, allowing more tubing connections to be installed in confined spaces. The threaded section has an O-ring or special thread, eliminating the need for additional sealing. The fittings are suitable for air only and must not be used with other gases or liquids. Operating pressure is 0~150PSI (0~9.9kgf/cm², 0~990kPa), vacuum pressure is -29.5inHg (-750mmHg), and operating temperature is 0~60°C. Compatible tubing materials are polyurethane and nylon. Thread sizes include M5, M6, and tapered pipe threads R1/8, R1/4, R3/8 and R1/2. During assembly, select the correct tool size for the fitting's hexagonal socket and confirm the thread type.

PL Push-In Fitting

PL Push-In Fitting

The PL push-in fitting is a pneumatic fitting for compressed air lines. Tubing can be easily connected or disconnected with a single push or pull, making installation and maintenance convenient. The PL and PT models feature a swiveling internal body that facilitates tubing routing in confined spaces; the PC model has a hexagonal socket for easier installation in tight spaces. The threaded end has an O-ring or specially designed threads that are precision-verified and generally require no additional sealing. The fitting is suitable for air only and must not be used with other gases or liquids. Operating pressure is 0~150 PSI / 0~9.9 kgf/cm² (0~990 kPa), vacuum pressure is -29.5 inHg / -750 mmHg (-750 Torr), and operating temperature is 0~60°C (32~140°F). Compatible tubing materials are polyurethane and nylon. Thread options include metric threads (M5×0.8, M6×1.0, etc.) and tapered pipe threads. Select an appropriate tool according to the corresponding hex width across flats when installing.

PT Type Push-in Fitting

PT Type Push-in Fitting

The PT type push-in fitting is a tee fitting for distributing compressed air in pneumatic systems. Its swivel body allows tubing to be routed freely in confined spaces, improving installation efficiency and allowing more tubing within a given space. Tubing can be quickly connected and disconnected with a simple push action. The threaded end has an O-ring or specially designed thread that is precision-machined and validated, generally eliminating the need for special sealing measures. During assembly, simply select a tool matching the fitting's hex size and confirm the thread type. The fitting is suitable for air only, not other gases or liquids. Its operating pressure is 0~150 PSI (0~9.9 kgf/cm², approximately 0~990 kPa), with vacuum capability down to -29.5 inHg (-750 mmHg, -750 Torr), and an operating temperature of 0~60 ℃ (32~140 ℉). Thread sizes include metric M5×0.8 and M6×1.0, and tapered pipe threads R1/8, R1/4, R3/8, and R1/2 (rendered by OCR in the original as R1.8, R1.4, R3.8, and R1.2). It is compatible with polyurethane (PU) and nylon (PA).

KJH Series Equal Straight Union

KJH Series Equal Straight Union

The KJH series equal straight union is a push-in fitting for connecting two tubes of the same diameter in a straight line in pneumatic piping. Both ends feature push-in collets: an internal retaining clip locks each inserted tube in place, while a sealing ring provides a seal. The fitting can be quickly assembled and disconnected without tools, simplifying air line installation and maintenance. The catalog lists sizes for tube diameters of Φ3, Φ3.2 and Φ4, with corresponding models KJH03-04, KJH23-04, KJH03-06, KJH23-06 and KJH04-06. Fitting outer diameters range from 8.6~11.8mm and overall lengths from 26.3~28.7mm. The product is suitable for small-diameter pneumatic circuits carrying non-corrosive fluids such as air and water. It is commonly used with similar push-in fittings on the same catalog page, such as KJL male connectors and KJW extended male connectors, to form a complete pneumatic piping system.

KJU Series U-Type Tee Fittings

KJU Series U-Type Tee Fittings

KJU series U-type tee fittings are push-in pneumatic connectors used to split one air line into two branches in a U- or Y-shaped configuration. They support both equal-diameter and reducing connections. Suitable tube outside diameters are Φ4 and Φ6. Models are designated as KJU + tube diameter at one end + tube diameter at the other end. For example, KJU04-00 indicates Φ4 at both ends, KJU06-00 indicates Φ6 at both ends, KJU04-06 indicates Φ4 at one end and Φ6 at the other, and KJU06-04 indicates the reverse. The insertion ends have O-ring seals for quick, tool-free connection and disconnection and repeated use. Bodies are mostly made of engineering plastic, with some featuring metal threads. These fittings are suitable for distributing and branching air lines in automation equipment, pneumatic fixtures, small cylinders, and inspection devices. Select the model according to the tube outside diameter and branch configuration (equal-diameter or reducing). The working medium is purified, filtered compressed air. Do not exceed the fitting's permissible pressure and temperature ranges.

KQ Series Push-to-Connect Fittings

KQ Series Push-to-Connect Fittings

KQ series pneumatic push-to-connect fittings include the KQH, KQL, KQV, KQD, KJH, KQLF, KQVF, KJS, KQLU, KJL, KJF, KQS, KQW and KQE models. They provide quick connections and disconnections between air tubing, pneumatic components and piping. The fittings can be used in vacuum systems. Their black plastic components resist dirt and are easy to identify. Standard threads come with sealant and can be screwed directly into threaded ports without additional thread seal tape. These fittings are suitable for general industrial applications such as metalworking shops, as well as installations where individual gas lines need to be identified, including multi-line piping and equipment with separate air circuits. Configurations include male straight, female straight, hex-socket, male branch tee, threaded tee and extended fittings. Select the appropriate fitting type, tubing outer diameter and thread size for the application.

KJ Series Push-in Fittings

KJ Series Push-in Fittings

KJ series push-in fittings provide quick connections for nylon and polyurethane tubing in pneumatic piping systems. Tubing can be inserted or removed using the release collet, allowing installation and removal without tools. They are suitable for metalworking shops, automation equipment, and applications where individual air lines need to be identified. The fittings can also be used in vacuum systems. Their black plastic bodies resist dirt and maintain a clean appearance. Standard threaded sections are supplied with sealant pre-applied, allowing them to be screwed directly into female threaded ports for an airtight connection without thread seal tape. Available configurations include male straight, female straight, male elbow, internal hex straight, equal tee, threaded tee, extended thread, and panel-mount types. These can be selected to suit different tube diameters and thread sizes, including M5, M6, G1/8, G1/4, and G1/2. The working medium is compressed air, including vacuum service. Applicable temperature and pressure depend on the tubing material. During installation, check the insertion depth and ensure the collet is securely locked.

KG Series Threaded Push-to-Connect Fittings

KG Series Threaded Push-to-Connect Fittings

KG series threaded push-to-connect fittings are used in pneumatic and vacuum lines to quickly connect plastic tubing to male-threaded ports and can be used in vacuum systems. The black plastic body resists dirt and has a clean appearance. The standard threads are pre-coated with sealant at the factory, providing a seal when screwed into a threaded hole without the need for thread seal tape. There are two basic styles: male straight fittings (KG2H) and male elbow fittings (KG2L). The push-to-connect tube end locks the tubing in place when inserted; press the release ring to remove it. The fittings can be reused. They are suitable for metalworking shops and piping systems where individual gas lines need to be identified. Selection is based primarily on thread size (such as M5, M6, G1/8 or G1/4), compatible tubing outside diameter (such as 4, 6, 8, 10 or 12 mm), and fitting style (straight or elbow).

AKH Series Quick-Connect Fittings

AKH Series Quick-Connect Fittings

The AKH series consists of pneumatic fittings with quick-connect connections on both ends and a built-in check valve to prevent reverse airflow. They are suitable for vacuum systems (vacuum level below -100kPa). The compact body is easy to install and accommodates tubing with an outer diameter of Φ4~Φ12mm. Specifications shared with the AKB series: working fluid: air; operating pressure range: 100kPa~1MPa; cracking pressure: 0.005MPa; fluid and ambient temperature: -5~60℃ (no freezing); compatible tubing materials: nylon, soft nylon and polyurethane. Available models include AKH04-00, AKH06-00, AKH08-00, AKH10-00 and AKH12-00, with body diameters of ΦD 9.3~21.7mm and lengths of 33.5~70.2mm. Release rings are available in gray, blue or black; plastic bodies are available in gray or black.

AKB Series Quick-Connect Fittings

AKB Series Quick-Connect Fittings

The AKB series comprises quick-connect fittings with built-in check valves that prevent reverse airflow in pneumatic lines. They are suitable for vacuum systems (vacuum level of -100kPa or below). Their quick-connect design is compact and easy to install, and accommodates tubing with an outside diameter of Φ4~Φ12mm. Specifications shared with the AKH series: operating fluid: air; operating pressure range: 100kPa~1MPa; cracking pressure: 0.005MPa; fluid and ambient temperature: -5~60℃ (no freezing); compatible tubing materials: nylon, soft nylon, and polyurethane. AKB fittings have a male thread on one side and a quick-connect fitting or female thread on the other, allowing direct connection to threaded ports.

KCH Series Equal-Diameter Straight Fittings

KCH Series Equal-Diameter Straight Fittings

The KCH series consists of pneumatic push-in equal-diameter straight fittings for connecting nylon and PU tubing in a straight line. Compatible tube outer diameters are Φ4, Φ6, Φ8, Φ10 and Φ12 mm, with thread sizes M5×0.8, 1/8″, 1/4″, 3/8″ and 1/2″. The body is made primarily of steel with a super-hard surface treatment and does not release copper ions. The maximum operating pressure is 1.0 MPa, and standard compression sealant is used. Air outflow from the fitting is suppressed when the hose is disconnected. KC series products must be used with KCR tube fittings. Select a model based on the applicable tube outer diameter, thread size, hex width across flats H, length L and dimension M.

KCL Series Elbow Fittings

KCL Series Elbow Fittings

The KCL series consists of pneumatic push-in elbow fittings for φ4~φ10 mm nylon and PU tubing, with a maximum operating pressure of 1.0MPa. The fittings are made of steel with an ultra-hard surface treatment and do not release copper ions. They stop air from escaping through the fitting when the tubing is disconnected. Models are identified by “KCL + applicable tube outer diameter + thread size.” Thread sizes include M5×0.8, 1/8", 1/4", and 3/8"; hex width H, length L, and dimension M vary by specification. KC series products are recommended for use with KCR tube fittings.

KC Series Push-to-Connect Pneumatic Fittings

KC Series Push-to-Connect Pneumatic Fittings

The KC series consists of push-to-connect fittings for pneumatic lines, including KCH equal-diameter straight fittings and KCL 90-degree elbow fittings. They must be used with KCR plug-in connectors and nylon or PU tubing. Compatible tube outside diameters are φ4, φ6, φ8, φ10 and φ12. Thread sizes include M5×0.8, 1/8″, 1/4″, 3/8″ and 1/2″. Hex widths across flats range from 8~22mm and lengths from 10~46mm. The body is primarily made of steel with an ultra-hard surface treatment and does not release copper ions, making it suitable for clean and copper-free applications. Compression sealant is supplied as standard, and the maximum operating pressure is 1.0MPa. Airflow is shut off when the tubing is disconnected, preventing leakage at the fitting. Model codes consist of KCH or KCL followed by a two-digit tube diameter, then “-” and the thread code M5, 01S, 02S, 03S or 04S.

KC Series Pneumatic Quick-Connect Fittings

KC Series Pneumatic Quick-Connect Fittings

This page covers two types of KC series pneumatic quick-connect fittings: KCH equal-diameter straight fittings and KCL elbow fittings, suitable for nylon and PU tubing with outside diameters of φ4~φ12 mm. The fitting bodies are made primarily of steel with an ultra-hard surface treatment and do not release copper ions, making them suitable for clean environments and applications where copper is prohibited. The hex width across flats H is 8~22 mm, and the overall length L is approximately 10.4~45.7 mm. Thread sizes include M5×0.8 and 1/8", 1/4", 3/8", and 1/2" pipe threads. The maximum operating pressure is 1.0 MPa, and standard compression sealant is included. The quick-connect design prevents air from escaping through the fitting when the hose is disconnected. KC series products must be used with KCR insert fittings. The same family also includes KCJ straight insert fittings and KCE female-threaded bulkhead fittings.

TO Series Pneumatic Push-to-Connect Fittings

TO Series Pneumatic Push-to-Connect Fittings

The TO series comprises push-to-connect fittings for pneumatic tubing in four configurations: TO-PC straight male threaded fittings, TO-POC cylindrical hex-socket fittings, TO-PCF straight female threaded fittings, and TO-PMF straight female threaded bulkhead fittings. They provide quick connections between PU/PA/nylon tubing and male or female threaded ports in compressed air systems. The tubing locks in place when inserted and can be released by pressing the collet, without tools, simplifying equipment installation and maintenance. Compatible tube outside diameters are 4, 6, 8, 10, 12, 14, and 16 mm. Thread options include M5 metric fine threads; R1/8, R1/4, R3/8, R1/2, and R3/4 tapered pipe threads; and G1/8, G1/4, G3/8, and G1/2 parallel threads. Bulkhead models also have M10×1, M14×1, M16×1, or M20×1 mounting lock threads. The catalog lists dimensions for each model, including L1 (overall length), L2, L3, H, S (across flats/wrench size), T (thread length), and D1 (thread or bore diameter), to help select fittings for the available installation space. The operating medium is filtered compressed air, and the nickel-plated brass body is fitted with a nitrile rubber seal,

TO-PMF Series Female Straight Bulkhead Fittings

TO-PMF Series Female Straight Bulkhead Fittings

The TO-PMF series consists of female straight bulkhead fittings for secure pneumatic connections through enclosure panels, partitions, or cylinder mounts. The push-in end accepts tubing with outside diameters of φ4, φ6, φ8, φ10, and φ12 mm. Female thread sizes include M5, G1/8 (code 01), G1/4 (code 02), G3/8 (code 03), and G1/2 (code 04). Bulkhead mounting threads are M10×1, M14×1, M16×1, and M20×1, with a hex locknut and sealing washer securing the fitting on opposite sides of the panel. The catalog specifies dimensions including L1 (overall length), L2 (threaded section length), L3 (bulkhead section length), H, S (hex width across flats), T (female thread size), and M (mounting thread) for product selection and panel hole design. These compact, reliably sealed fittings are suitable for routing pneumatic lines through panels in automated equipment.

TO-P Series Push-in Pneumatic Tube Fittings

TO-P Series Push-in Pneumatic Tube Fittings

The TO-P series consists of push-in pneumatic tube fittings in a range of configurations, including straight unions (TO-PU), straight bulkhead unions (TO-PM), elbows (TO-PV), tees (TO-PE), Y-unions (TO-PY), crosses (TO-PZA), straight reducing unions (TO-PG), and reducing tees (TO-PEG). They provide quick connection, branching, and transitions in pneumatic lines using φ4~φ16 tubing. The series covers tube outer diameters of 4/6/8/10/12/14/16. For straight unions and tees, overall length L1 increases from 30mm to 74mm and body outer diameter D1 from φ8 to φ23 as tube size increases. Bulkhead models also specify L2 and M10×1~M24×1 mounting threads for panel mounting. Reducing models are designated by “large-end tube diameter-small-end tube diameter” (e.g., TO-PG8-6) and connect lines with different tube sizes. To install, insert the tube fully; the gripping claws lock automatically. Press the release ring to disconnect. These fittings are widely used in automation equipment, fixtures, and pneumatic control circuits.

TO-PM Series Straight Bulkhead Fittings

TO-PM Series Straight Bulkhead Fittings

TO-PM series straight bulkhead fittings are pneumatic push-to-connect fittings that secure and connect air tubing through panels, partitions or equipment walls. Their bulkhead design features a male-threaded end for mounting through the panel and a push-to-connect port for quick tubing insertion and removal. Compatible tubing outside diameters are φ4, φ6, φ8, φ10, φ12, φ14 and φ16 mm, with corresponding thread sizes from M10×1 to M24×1. Overall length L1 ranges from 30~56 mm, L2 from 17.5~38 mm, and outside diameter D1 from φ8~φ23 mm. Select the fitting to match the tubing outside diameter and mounting thread. Applications include automated equipment, pneumatic control cabinets and tubing connections through panels.

TO-PV Series Elbow Fittings

TO-PV Series Elbow Fittings

The TO-PV series consists of push-in elbow fittings for 90° turns in pneumatic lines. They belong to the TO-P series of push-in tube fittings, along with TO-PU straight fittings, TO-PM straight bulkhead fittings, TO-PE tee fittings, TO-PY Y fittings, TO-PZA cross fittings, and TO-PG straight reducing fittings. The series is available in seven sizes for tube outer diameters of φ4, φ6, φ8, φ10, φ12, φ14, and φ16. Model numbers consist of TO-PV followed by the tube outer diameter (for example, TO-PV4 fits φ4 tubing). Two key dimensions to consider when selecting a fitting are L1, the length from the center to the end of the fitting (17.5~37 mm), and D1, the maximum outer diameter of the fitting body (φ8~φ23). Simply insert the tubing to seal and lock it in place. The fittings can be connected and disconnected by hand, making them suitable for applications requiring frequent reconfiguration. Their elbow design allows tubing to turn along edges in tight spaces, reducing the required clearance height. Used with nylon or polyurethane tubing, they are widely applied in compressed-air circuits for automated equipment, fixtures, packaging machinery, and electronics assembly lines.