Model · PT Type Push-in Fitting
PT Type Push-in Fitting
The PT type push-in fitting is a tee fitting for distributing compressed air in pneumatic systems. Its swivel body allows tubing to be routed freely in confined spaces, improving installation efficiency and allowing more tubing within a given space. Tubing can be quickly connected and disconnected with a simple push action. The threaded end has an O-ring or specially designed thread that is precision-machined and validated, generally eliminating the need for special sealing measures. During assembly, simply select a tool matching the fitting's hex size and confirm the thread type. The fitting is suitable for air only, not other gases or liquids. Its operating pressure is 0~150 PSI (0~9.9 kgf/cm², approximately 0~990 kPa), with vacuum capability down to -29.5 inHg (-750 mmHg, -750 Torr), and an operating temperature of 0~60 ℃ (32~140 ℉). Thread sizes include metric M5×0.8 and M6×1.0, and tapered pipe threads R1/8, R1/4, R3/8, and R1/2 (rendered by OCR in the original as R1.8, R1.4, R3.8, and R1.2). It is compatible with polyurethane (PU) and nylon (PA).
Overview
The PT type push-in fitting is a tee fitting for distributing compressed air in pneumatic systems. Its swivel body allows tubing to be routed freely in confined spaces, improving installation efficiency and allowing more tubing within a given space. Tubing can be quickly connected and disconnected with a simple push action. The threaded end has an O-ring or specially designed thread that is precision-machined and validated, generally eliminating the need for special sealing measures. During assembly, simply select a tool matching the fitting's hex size and confirm the thread type. The fitting is suitable for air only, not other gases or liquids. Its operating pressure is 0~150 PSI (0~9.9 kgf/cm², approximately 0~990 kPa), with vacuum capability down to -29.5 inHg (-750 mmHg, -750 Torr), and an operating temperature of 0~60 ℃ (32~140 ℉). Thread sizes include metric M5×0.8 and M6×1.0, and tapered pipe threads R1/8, R1/4, R3/8, and R1/2 (rendered by OCR in the original as R1.8, R1.4, R3.8, and R1.2). Compatible with polyurethane (PU) and nylon (PA) tubing, it is widely used for pneumatic connections in automated equipment, pneumatic actuators, and tooling and fixtures.
Product category: Pneumatic components/Pneumatic fittings/Push-in fittings
