Model · TO-PEG Series Reducing Tee Fittings
TO-PEG Series Reducing Tee Fittings
The TO-PEG series consists of push-in reducing tee fittings for pneumatic piping and belongs to the Sankes TO series of push-in fittings for metal tubing. These fittings create a branch from a main line, with different connection sizes available for the main line ends and the branch, allowing tubes of different diameters from φ4~φ16 to be connected. Models are designated by TO-PEG followed by the larger tube diameter and smaller tube diameter (e.g., TO-PEG8-6). The same family also includes TO-PU straight fittings, TO-PM straight bulkhead fittings, TO-PV elbow fittings, TO-PE equal tee fittings, TO-PG straight reducers, and TO-PZA cross fittings. The push-in design seals upon insertion; press the release ring to remove the tube. The fittings are suitable for compressed air lines and air distribution and piping in automated equipment. Common body and gripping-claw dimensions include metal tube outer diameter (φ4, φ6, φ8, φ10, φ12, φ14, φ16), L1 overall length, S1/S2 insertion depths at both ends, and D1/D2 connection diameters. Select the appropriate larger-end–smaller-end model according to the actual tube outer diameters at the main line ends and branch.
Overview
The TO-PEG series consists of push-in reducing tee fittings for pneumatic piping and belongs to the Sankes TO series of push-in fittings for metal tubing. These fittings create a branch from a main line, with different connection sizes available for the main line ends and the branch, allowing tubes of different diameters from φ4~φ16 to be connected. Models are designated by TO-PEG followed by the larger tube diameter and smaller tube diameter (e.g., TO-PEG8-6). The same family also includes TO-PU straight fittings, TO-PM straight bulkhead fittings, TO-PV elbow fittings, TO-PE equal tee fittings, TO-PG straight reducers, and TO-PZA cross fittings. The push-in design seals upon insertion; press the release ring to remove the tube. The fittings are suitable for compressed air lines and air distribution and piping in automated equipment. Common body and gripping-claw dimensions include metal tube outer diameter (φ4, φ6, φ8, φ10, φ12, φ14, φ16), L1 overall length, S1/S2 insertion depths at both ends, and D1/D2 connection diameters. Select the appropriate larger-end–smaller-end model according to the actual tube outer diameters at the main line ends and branch.
Product category: Pneumatic components/Pneumatic fittings/Push-in fittings



