Rotating-nut ball screws vs. rotating screws: Check drawings and specifications before selecting

First confirm what structure “rotating screw” refers to

The RLS series is named “rotating-nut ball screw,” confirming that it is a rotating-nut product. During procurement discussions, if another option is described only as a “rotating screw,” first request an assembly drawing and confirm the specific structure the name refers to. Then check the installation space and motion requirements against the drawing; do not assume the two are interchangeable based on the name alone.

Apply ball screw selection parameters to the operating conditions

When reviewing a ball screw solution, first compile requirements such as positioning accuracy, stiffness, and column stability, then perform calculations and verification using initial conditions such as the load. The relevant materials list these as factors involved in selecting and calculating ball screw assemblies. They can serve as a checklist for reviewing a solution, but are not sufficient on their own to determine whether a rotating-nut design is better or worse than other structures.

Refer to the model table and product drawings for specifications

The RLS series drawings use symbols such as A, B, C, D, d, E, J, K, L, P, and W to indicate dimensions, and also include notes for through-holes and equal spacing. When finalizing a solution, check the specific model, dimensions, and drawing requirements against the product details page. Dimensions and compatibility with other components cannot be inferred from the symbols alone.

Check mounting conditions for the support unit separately

The EF series support unit is used at the floating end of a ball screw, providing bearing support and compensating for thermal expansion. It can be considered as support-component information when reviewing a complete machine solution, but the available materials do not specify whether it is compatible with the RLS series. When selecting a unit, check the model, mounting dimensions, and interface requirements on the relevant product details page. Do not infer compatibility solely from the fact that it is “for ball screws.”

Related product information

EF-type support unit (floating side): See the product details for models, drawings, and specifications.

RLS Series Rotating-Nut Ball Screw: See the product details for models, drawings, and specifications.

PTA Series Precision Motion Ball Screw: See the product details for models, drawings, and specifications.

Back to articles