Fasteners — Page 3

ZBPC Threadless Ball Plungers

ZBPC Threadless Ball Plungers

ZBPC series threadless ball plungers feature a SUS304 stainless steel body, a SUS440C ball tip (hardness: 55 HRC or higher), and a SUS631J1 stainless steel spring. No threaded-hole machining is required, reducing machining time. Usage notes: Measure the dimensions and adjust the counterbore depth of the mounting hole. The plunger can be press-fitted into the hole or installed with adhesive. Do not force installation if the clearance is too small. Available in a range of sizes, with ball diameters of 3–6 mm, lengths of 7–15 mm, and spring forces of 4.5–31 N.

Double-Ended Copper Ball Plungers

Double-Ended Copper Ball Plungers

The Double-Ended Ball Plungers series features a copper body with no surface treatment, SUS440C ball tips with a hardness of at least 55 HRC, and SUS631J1 springs. Diameters range from 2.5 mm to 8 mm, lengths from 5.3 mm to 18 mm, and strokes from 0.65 mm to 2.1 mm. End force (min./max.) varies by model. These products are suitable for positioning, securing, stopping, and other applications involving light loads. Ordering example: ZCBP4 indicates the 4 mm diameter model.

Headed Hex Socket Ball Plunger

Headed Hex Socket Ball Plunger

The headed hex socket ball plunger is a mechanical component used for positioning and locking. Its body is made of S45C steel with a black-oxide finish; the spring is made of SUS303 stainless steel, and the ball is made of SUS440C stainless steel, with a hardness of 55 HRC or higher. This series includes two submodels, ZBPCT and ZBPCS, with thread sizes ranging from M4 to M8. Length and load vary by size. The product is suitable for applications such as workholding fixtures and mold positioning, providing stable spring force.

Spring Plunger Series

Spring Plunger Series

This series of spring plungers includes standard and stainless-steel-tip types, suitable for positioning, pushing, cushioning, and similar applications. The load classifications are extra-light, light, heavy, and extra-heavy. The body is made of stainless steel equivalent to SUS304, the tip pin is made of SUS440C (hardness: 55 HRC-), and the spring is made of SUS304. The operating temperature range is -30 to 260°C. Thread diameters of 6, 8, 10, and 14 mm are available, with strokes ranging from 2 to 185 mm; the specific stroke range varies by diameter and load classification. Ordering examples: ZPJH12-10 and ZPJLSW6-5.

Spring Plunger – Flat Nose

Spring Plunger – Flat Nose

This series features standard spring plungers with a flat nose. The body is made of S45C steel with a black-oxide finish; the pin is made of zinc-plated S45C; and the spring is made of SWP-B spring steel. Thread sizes range from M5 to M12, with pin diameters of 2–5.5 mm, overall lengths of 20–43 mm, and spring forces of 2–19.6 N. Suitable for automation applications such as fixtures, mold positioning, stops, and ejection, these plungers provide consistent spring force and reliable wear resistance.

Spring Plunger (ZPJLR)

Spring Plunger (ZPJLR)

ZPJLR series spring plungers feature a spherical tip, a black-oxide-finished S45C body, a zinc-plated S45C pin, and a SWP-B spring. Available nominal thread diameters are M10, M16, and M30, with strokes (S) of 5, 10, or 20 mm. The ball diameter (H) and radius (R) vary accordingly, while the overall length (L) and B dimension depend on the size. Spring force ranges from 5.9 N to 117.7 N. Suitable for positioning, locking, and other industrial applications.

ZPJHR Spring Plungers

ZPJHR Spring Plungers

The ZPJHR series features spring plungers with a rounded tip. The body is made of black-oxide-treated S45C steel, the pin is zinc-plated S45C steel, and the spring is SWP-B. Available in M12 and M24 thread sizes, with different pin diameters, tip radii, lengths, and spring force ranges. Suitable for positioning and clamping applications, these plungers offer reliable spring performance and durability.

ZPJHZ Spring Plunger (Front-End Thread)

ZPJHZ Spring Plunger (Front-End Thread)

The ZPJHZ series spring plungers feature a front-end thread. The body is made of S45C carbon steel with a black-oxide finish, the pin is made of zinc-plated S45C, and the spring is made of SWP-B. Three thread sizes are available: M10×1.5, M12×1.75, and M16×2.0. Stroke S is available in 10 mm, 15 mm, 20 mm, and 30 mm options. The load range extends from a minimum of approximately 4.9 N to a maximum of 78.5 N. These plungers are suitable for mechanical positioning, locking, and support applications, and offer excellent spring action and durability.

Spring Plunger – Flange Type

Spring Plunger – Flange Type

The Spring Plunger – Flange Type (ZFPJL) features a flanged mounting base. Its body is made of blackened S45C steel, the pin is zinc-plated S45C steel, and the spring is made of SWP-ZP. It is suitable for positioning, clamping, ejection, and other automation applications. A range of thread sizes (M3 to M16) and pin strokes (S) is available, with spring forces from 0.49 N to 78.5 N. The flange design allows for easy side mounting and provides stable support.

Spring Plunger – Flange-Mounted

Spring Plunger – Flange-Mounted

The ZFPJH series spring plungers are designed for flange mounting. The body is made of S45C steel with a blackened finish, the pin is zinc-plated, and the spring is made of SWP-ZP spring steel. Available in a range of thread sizes, including M4, M6, M10, M12, and M16, with stroke options such as 2 mm, 3 mm, 5 mm, and 20 mm. Suitable for positioning, pushing, locking, and other applications, they feature a simple design, easy installation, and a wide load range.

Spring Plunger

Spring Plunger

The spring plunger series offers two mounting styles: front-threaded and flange-mounted, and is available in light-duty and heavy-duty versions. The body is made of S45C steel, hardened to 29–35 HRC and black-oxide treated. The pin is made of S45C steel, hardened to 57–63 HRC and zinc-plated. The spring is made of SWP-B steel. The operating temperature range is -30°C to 80°C. Order using the model-diameter-stroke code; for example, ZPJLTP12-15 is the light-duty front-threaded type (12 mm diameter, 15 mm stroke), and ZPJLH8-5 is the flange-mounted type (8 mm diameter, 5 mm stroke). Suitable for applications such as positioning and pushing, these products provide consistent spring force.

Spring Plungers – Threaded Tip (Heavy-Duty)

Spring Plungers – Threaded Tip (Heavy-Duty)

This series of heavy-duty spring plungers features a threaded tip and is suitable for positioning, pushing, or locking applications involving high loads and frequent use. The body is made of S45C steel, with a hardness of 29–35 HRC and a black oxide finish. The pin is made of S45C steel, with a hardness of 57–63 HRC, and is zinc-plated. The spring is made of SWP-B. Operating temperature range: −30°C to 80°C. Models have the prefix ZPJHTP; select the specific size based on thread diameter and stroke.

Spring Plunger – Flange Type

Spring Plunger – Flange Type

Flange-type spring plunger. Body: S45C steel, hardness 29–35 HRC, black oxide finish; pin: S45C steel, hardness 57–63 HRC, zinc-plated; spring: SWP-B. Operating temperature range: −30°C to 80°C. Suitable for positioning, pushing, cushioning, and other automation applications. Example order code: ZPJLH8-5.

Short spring plunger

Short spring plunger

The short spring plunger series offers a range of materials and load ratings, including steel-flange, resin-flange, and stainless-steel-pin types. Extra-light, light, heavy, and extra-heavy load versions suit a variety of applications. Their compact design makes them ideal for positioning, locking, and ejecting. The body is made of S45C with a SUS304-equivalent surface treatment or black oxide finish. Pin materials include SWP-B, SUS440C, and SUS631J1, offering high hardness and wear resistance. Operating temperature range: -30 to 80°C (up to 260°C for stainless steel). Thread sizes range from M3 to M16, with loads from 0.11 N to 78.8 N. Ordering example: ZSPJS5 (M5 steel, extra-light load).

ZSPJL Short Steel Spring Plunger (Light-Duty)

ZSPJL Short Steel Spring Plunger (Light-Duty)

The ZSPJL series features short steel spring plungers designed for light-duty applications such as positioning, locking, and ejection. The body and pin are made of S45C steel. The pin is carburized and hardened to 57–63 HRC, with a black-oxide finish for good wear and corrosion resistance. The spring is made of SWP-B material and operates at temperatures from -30 to 80°C. The series is available with M4 and M5 threads, a 1.2 mm stroke, a length of 9 mm, and loads ranging from 1.6 to 7.8 N. A version without an anti-loosening feature is available (suffix -N). Its compact design is suitable for installations with limited space.

ZSPRM Series Plungers

ZSPRM Series Plungers

The ZSPRM series comprises short, ultra-light-load spring plungers with resin flanges. The body is made of black-oxide-finished S45C, and the pin is made of polyacetal (POM). Thread size: M10; load range: 1.76–4.71 N; operating temperature: −30 to 80°C. The standard model without anti-loosening treatment is ZSPRM; the anti-loosening version, ZSPRM-N, is also available.

Short Spring Plunger

Short Spring Plunger

This series of short spring plungers is available in a range of materials, including steel and resin flanges and stainless steel pins. Four load ratings are offered: extra light, light, heavy, and extra heavy. Thread sizes range from M3 to M16, and overall lengths from 7 mm to 22 mm. The operating temperature range is -30 to 80°C (up to 260°C for stainless steel). Body materials include black-oxide-treated S45C steel, polyacetal (POM), and stainless steel equivalent to SUS304. Pin materials include SWP-B, SUS440C, and SUS631J1. Suitable for industrial applications such as positioning, locking, and ejection.

Short Spring Plungers

Short Spring Plungers

This series of short spring plungers is available with steel, stainless steel, or resin bodies, and is suitable for positioning, detenting, ejection, and similar applications. Thread sizes range from M3 to M16, with strokes from 1 mm to 4.5 mm and loads from 0.11 N to 78.8 N, depending on the model and load type. Steel and stainless steel models operate at temperatures from -30°C to 260°C, while resin models are suitable for -30°C to 80°C. The surface finish is black oxide, and the body has a carburized and hardened hardness of 57–63 HRC. Ordering examples: ZSPJS5 (steel) and ZSPJY5 (stainless steel).

ZSPRK Series Stainless Steel Spring Plungers with Resin-Tipped Pins

ZSPRK Series Stainless Steel Spring Plungers with Resin-Tipped Pins

The ZSPRK series features short stainless steel spring plungers with resin-tipped pins, suitable for applications ranging from light to extra-heavy loads. The body material is equivalent to SUS304, and the pin is made of SUS631J1. The operating temperature range is -30 to 80°C. Available thread sizes are M8 and M10, with different load capacities (initial and maximum loads). The surface is black oxide treated. These plungers are widely used in industrial applications for positioning, pushing, and stopping.

Short Spring Plungers

Short Spring Plungers

This series of short spring plungers is available in two material types: steel flange and stainless steel pin. The steel flange body is made of S45C, carburized and hardened (57–63 HRC), with a black oxide finish. The spring is made of SWP-B, with an operating temperature range of -30 to 80°C. The stainless steel pin body is equivalent to SUS304, while the pin is made of SUS440C or SUS631J1 and has a hardness of at least 55 HRC. Its operating temperature range is -30 to 260°C. Four load ratings are available: extra light, light, heavy, and extra heavy. Thread sizes range from M3 to M16, pin diameters from 1.2 to 8 mm, and overall lengths from 7 to 22 mm. Some steel models feature anti-loosening treatment (N type). These plungers are widely used for positioning, clamping, and pushing in industrial automation applications.

Stainless Steel Short Spring Plunger, Extra Heavy-Duty Type ZSPRX

Stainless Steel Short Spring Plunger, Extra Heavy-Duty Type ZSPRX

This series features short spring plungers made of stainless steel (equivalent to SUS304), with SUS631J1 pins hardened to at least 55 HRC. Operating temperature range: -30 to 80°C. The extra heavy-duty design is suitable for high-load positioning and clamping applications. M16 thread; load range: 26.6 to 78.7 N. Dimensions: d = 8 mm, s = 4.5 mm, L = 22 mm, t = 3 mm, B = 8 mm.

ZQP Series Short Spring Plungers

ZQP Series Short Spring Plungers

ZQP Series Short Spring Plungers feature a body made of S45C carbon steel with a black-oxide finish and a hardness of 25–35 HRC. The pin is made of S45C, has a hardness of 55 HRC, and is black-oxide finished. The spring is made of SWP-B piano wire. The short design is suitable for positioning, pushing, and similar applications where space is limited. Available in one thread size, M4, these plungers have a pin diameter of 1.8 mm, an overall length of 9 mm (see table), a wrench size of 1.5 mm, and a load range of 0.6–4.5 kgf. Their compact structure makes them easy to install, and they are widely used for positioning in automation equipment and in jigs and fixtures.

ZQS Stainless Steel Short Spring Plunger

ZQS Stainless Steel Short Spring Plunger

The ZQS series stainless steel short spring plungers feature a SUS304 stainless steel body, a SUS440C stainless steel pin, and a SUS304 spring. Corrosion-resistant and suitable for clean environments such as food processing and medical settings, their compact design saves installation space. Thread sizes range from M5 to M24, stroke from 2.4 to 13 mm, overall length from 12 to 34 mm, and spring force from 5 to 75 N. Commonly used in positioning, inspection, and pressing applications in automation equipment.

ZCPWF Spring Plunger

ZCPWF Spring Plunger

This series of spring plungers features a hex socket for wrench installation. Body materials include black-oxide S45C and SUS303 stainless steel; pin materials include black-oxide S45C, SUS440C, and POM (polyoxymethylene); and spring materials are SWP-B or SUS304. Thread sizes range from M3 to M24. These plungers are suitable for positioning, clamping, supporting, and similar applications. Depending on the size, spring force ranges from 2 N to 170 N. They feature a compact design and are easy to install.

Hex-Head Spring Plungers

Hex-Head Spring Plungers

This series of hex-head spring plungers provides positioning, clamping, and braking functions. The hex head allows easy installation with a wrench. The body is available in black-oxide carbon steel or SUS303 stainless steel. Pin options include steel (S45C or SUS440C) and nylon (POM), with SWP-B or SUS304 springs, respectively. Ten thread sizes from M3 to M24 are available. Pin diameters range from 1 to 12 mm, overall lengths from 12 to 52 mm, strokes from 1 to 10 mm, hex sizes from 0.7 to 8 mm, and spring forces from 2 to 170 N. Suitable for positioning and clamping in automation equipment.

ZCSPW Stainless Steel Spring Plungers

ZCSPW Stainless Steel Spring Plungers

ZCSPW series stainless steel spring plungers feature a SUS303 stainless steel body, a SUS440C stainless steel pin, and a SUS304 stainless steel spring, providing good corrosion resistance. They are suitable for positioning, clamping, and stopping applications that require stainless steel components. Nominal thread diameters range from M3 to M24; overall lengths from 12 to 52 mm; pin diameters from 1 to 12 mm; strokes from 1 to 10 mm; and hex sizes from 0.7 to 8 mm. Spring force ranges from a minimum of 2 N to a maximum of 170 N. Example part number: ZCSPW5 (for an M5 thread). These standard parts are available in ample stock.

Spring Plungers

Spring Plungers

A spring plunger is an automation component used for positioning, pushing, or sensing. Its hexagonal head makes installation and adjustment easy. This series offers four material combinations: ZCPWF (black-oxide steel), ZCPWN (steel body with a POM pin), ZCSPW (stainless steel body and pin), and ZCSPN (stainless steel body with a POM pin). Thread sizes range from M3 to M24, pin diameters from 1 to 12 mm, lengths from 12 to 52 mm, strokes from 1 to 10 mm, and spring forces from 2 to 170 N. These plungers are suitable for frequent insertion and removal and for light-load positioning, with features such as wear resistance, corrosion resistance, or low friction. When ordering, specify the model and thread size; for example, ZCPWF5 indicates the black-oxide steel version with an M5 thread.

Small-Diameter Spring Plunger, Short Type

Small-Diameter Spring Plunger, Short Type

The short-type small-diameter spring plunger series includes two types: flat-tip (ZMPFS) and spherical-tip (ZMPJS). The body is made of SUS303, while the pin and spring are made of SUS304. Operating temperature range: -30 to 140°C. Pin diameter: 1.5 to 4 mm; body outer diameter (D1): 0.5 to 4 mm; length: 8 to 11.5 mm; pin stroke (C): 0.05 to 0.3 mm. Light-load type load range: MIN 0.49 to 0.64 N, MAX 0.98 to 1.96 N. During installation, adhesive is recommended to prevent loosening. The recommended tolerance for the mounting hole is D H7. Suitable for light-load applications such as precision positioning and ejection.

ZMPJS Series Plungers

ZMPJS Series Plungers

This series features short, small-diameter spring plungers with spherical tips, suitable for positioning and pushing applications. The body is made of SUS303, while the plunger pin and spring are made of SUS304. Operating temperature range: -30 to 140°C. The spherical tip provides smooth contact. Dimensions: thread diameter S = 3–5 mm, ball diameter d = 3–4 mm, body outer diameter D1 = 2–4 mm, length L = 3.5–5.5 mm, and stroke C = 10–11.5 mm. Load ranges from an initial 0.15–0.3 N to a maximum of 0.49–1.96 N. Apply adhesive during installation. An H7 tolerance is recommended for the mounting hole.

Small-Diameter Spring Plungers

Small-Diameter Spring Plungers

The small-diameter spring plunger series includes several types: flat-tip (ZMPFL), ball-tip (ZMPJL), cone-tip (ZMPTL), and fixed (ZMPFLT/ZMPFHT). The body is made of SUS303, while the pin and spring are made of SUS304. The operating temperature range is -30 to 140°C. Light-load and heavy-load options are available, with loads ranging from 0.49 N to 7.06 N. Suitable for positioning, pressing, and other automated applications.

ZMPJL Small-Diameter Spring Plunger, Heavy-Duty Spherical Type

ZMPJL Small-Diameter Spring Plunger, Heavy-Duty Spherical Type

The ZMPJL series comprises heavy-duty spherical-type, small-diameter spring plungers. The body is made of SUS303 stainless steel, and the plunger pin is made of SUS304 stainless steel. Suitable for temperatures from -30 to 140°C. Available in a range of thread sizes S (1.5, 2, 3, 6, 9, 4, 5, 12), with different overall dimensions and load capacities. The heavy-duty type has a load range of 0.93 N to 7.06 N. A DH7 mounting hole is recommended. Apply adhesive during installation to prevent the plunger from coming loose.

ZMPTL Conical R-Type Spring Plungers

ZMPTL Conical R-Type Spring Plungers

The ZMPTL series features small-diameter spring plungers with conical R-type tips. The body is made of SUS303 stainless steel, while the pin and spring are made of SUS304 stainless steel. The operating temperature range is -30 to 140°C. Light-load and heavy-load types are available, with load capacities ranging from 0.49 N to 7.06 N depending on the size. Standard dimensions include thread diameter S, pin diameter d1, head diameter D1, length L, chamfer C, and spherical radius R. For installation, an H7-tolerance hole is recommended, and adhesive should be used to prevent loosening. Suitable for light-load applications such as positioning and pushing.

Small-Diameter Spring Plunger, Fixed Type

Small-Diameter Spring Plunger, Fixed Type

This series features small-diameter, fixed-type spring plungers with flat heads for light loads. The body is made of SUS303, the pin of SUS304, and the spring of SUS304. The operating temperature range is -30 to 140°C. Suitable for positioning, ejecting, and pressing applications in industrial automation. Multiple thread sizes (S values) and lengths are available. Loads range from 0.49 N for the light-load type to 3.82 N; the heavy-load type (ZMPFHT) supports loads up to 7.06 N. For installation, a DH7 mounting hole is recommended; apply adhesive to prevent loosening.

ZMPFHT Small-Diameter Spring Plunger, Fixed Type (Heavy Load)

ZMPFHT Small-Diameter Spring Plunger, Fixed Type (Heavy Load)

The ZMPFHT is a heavy-load, fixed-type small-diameter spring plunger made up of a SUS303 body, a SUS304 pin, and a spring. It is suitable for environments from -30 to 140°C. Thread size S ranges from 3 to 6 mm, body diameter D1 from 4.5 to 5.5 mm, and overall length L from 20 to 32 mm. The load range for the light-load version is MIN 0.98–3.92 N and MAX 0.98–7.06 N (corresponding values for the heavy-load version are to be confirmed and are typically higher than those for the light-load version). A DH7 tolerance is recommended for the mounting hole. Apply adhesive before use to prevent loosening.

Spring Plungers – Press-Fit, Inch

Spring Plungers – Press-Fit, Inch

The ZPFBB series comprises press-fit spring plungers in inch sizes, suitable for positioning, pushing and similar applications. The body is made of S45C steel with a black-oxide finish. The pin has a hardness of at least 55 HRC, and the spring is made of SUS304 stainless steel. A range of diameters is available, with spring forces from 1 to 18 lb. To order, specify ZPFBB followed by the diameter in inches.

Spring Plungers – Press-Fit, Inch Sizes

Spring Plungers – Press-Fit, Inch Sizes

This series of press-fit spring plungers features inch-based dimensions. The body is available in S45C (black oxide finish) or SUS303, the pin in S45C or SUS303J1, and the spring in SUS304 or SUS631J1. A range of diameters is available (0.125 to 0.5 inches), with various stroke and spring force options. Suitable for applications such as die positioning and mechanical stops.

ZPSSN Spring Plunger – Press-Fit, Inch

ZPSSN Spring Plunger – Press-Fit, Inch

ZPSSN series spring plunger with a press-fit installation and inch dimensions. The body is made of S45C steel with a black-oxide finish, and the pin is made of polyacetal (POM). Springless design. Suitable for light-duty positioning and stop applications. Standard dimensions: D = 0.25 in, L = 0.521 in, S = 0.125 in; force range: 2.5–6 lb.

ZPSNN Spring Plungers – Press-Fit, Inch

ZPSNN Spring Plungers – Press-Fit, Inch

The ZPSNN series comprises press-fit spring plungers in inch sizes. The body is made of SUS303 stainless steel with no surface treatment, and the plunger pin is made of polyacetal (POM) plastic. No spring is included. Suitable for applications such as light-duty positioning and ejecting workpieces. Thread diameter: 0.312–0.5 in; overall length: 0.64–1.1 in; stroke: 0.151–0.25 in; spring force: 4–18 lb. All dimensions are in imperial units.

Spring Plunger Series

Spring Plunger Series

A spring plunger is a standard mechanical component used for positioning, guiding, and preload. The body is made of anodized aluminum alloy, the pin is made of POM, and the spring is made of SWP-B. Available in a range of sizes, with head diameters (A) from 6 mm to 16 mm, pin diameters (B) from 3 mm to 10 mm, strokes (F) from 0.5 mm to 1.6 mm, and spring forces (P) from 10 N to 100 N. Widely used for positioning and securing, as well as in fixture systems for industrial automation. The model designation is ZT56A-size code; the version with a sealing ring is ZT56B.

ZPX Series Lock Nuts

ZPX Series Lock Nuts

This series of precision lock nuts is designed for fine-pitch threads and is available with several head styles, including reset, spherical, tapered, and flat. The material comparison table lists two basic subseries, ZPX and ZSPX, with thread sizes 5, 6, 8, 10, 12, 16, and 16L, each with different pitches and overall dimensions. The specifications table provides key dimensions such as D1, S, B, and L, along with the load range (min–max) for each size. These products are widely used in mechanical locking applications and offer high load capacity and flexible installation.

Aluminum Alloy Knob Plunger with Short Thread

Aluminum Alloy Knob Plunger with Short Thread

This series of aluminum alloy knob plungers features a short threaded section and is suitable for applications requiring precise adjustment of pin projection. The body is made of SUM22, and the knob is made of A2017 with a black anodized finish. The pin is carburized and hardened to 50–60 HRC, the spring is made of SUS631J1 stainless steel, and the locking nut is made of SS400. Two types are available: return type (ZPXSAN) and self-locking type (ZPXSKN), with thread specifications of M12 × 1.5 and M16 × 1.5, respectively. The compact design offers good corrosion resistance.

Knob Plunger, Fine-Pitch Thread

Knob Plunger, Fine-Pitch Thread

Fine-pitch threaded knob plungers are suitable for applications requiring fine adjustment of the pin’s protrusion. Compared with coarse threads, they allow more precise positioning. The knob is made of aluminum alloy, while the body, pin, and spring are made from high-quality materials to ensure durability and stability. An ordering example is ZSXYAS12, where 12 indicates the thread diameter. Compact and easy to operate, this series is widely used in industrial automation, jigs, fixtures, and other applications requiring precise positioning and adjustment.

ZPXRAN Series Plungers

ZPXRAN Series Plungers

The ZPXRAN series features self-locking knob plungers with aluminum alloy knobs (A2017, black anodized), SUM22 bodies, carburized and hardened pins (hardness: 50–60 HRC), SUS631J1 stainless steel springs, and SS400 lock nuts. They are suitable for applications such as positioning and indexing where the pin must remain extended. The fine-pitch thread is available in a 12 mm diameter (1.5 mm pitch). Overall length is 48 mm, and the self-locking load is 14.5 N. These plungers provide stable positional retention and are easy to operate.

Aluminum Alloy Knob Plunger, Short Thread Type

Aluminum Alloy Knob Plunger, Short Thread Type

This series of aluminum alloy knob plungers features a short thread. The knob is made of aluminum alloy with a black anodized finish, the body is made of SUM22, the pin is carburized and hardened to 50–60 HRC, and the spring is made of SUS631J1. Available in return and self-locking types, these plungers have a fine thread pitch of 1.5 mm and are offered with thread diameters of 12 mm and 16 mm. The load range is 6.5–18 N. Suitable for positioning, detection, stopping, and other applications in automation equipment.

Knob Plunger, Short Thread Type, Aluminum Alloy

Knob Plunger, Short Thread Type, Aluminum Alloy

This knob plunger series features an aluminum alloy knob and a SUM22 body. The pin is carburized and hardened (50–60 HRC), and the spring is made of SUS631J1 stainless steel. Available in return and locking types. Fine-pitch threads are available in M12×1.5 and M16×1.5 sizes. Suitable for industrial applications such as positioning and indexing, and operated manually using the knob. Some models come with a locknut (SS400).

Knob Plungers

Knob Plungers

The knob plunger series includes two subseries: coarse-thread models and resin-knob models, designed for mechanical positioning and indexing. Coarse-thread models feature a black-oxide-finished steel body and are available in spring-return and locking versions, with an optional lock nut. Resin-knob models have a black matte PA6 nylon knob, a SUM22L steel body, an S45C pin, and an SWP-B spring. These are also available in spring-return and locking versions. A range of thread sizes and load capacities makes the series suitable for positioning and locking in automation equipment.

Indexing Plungers with Resin Knobs

Indexing Plungers with Resin Knobs

This series of indexing plungers with resin knobs features fine-pitch threads. The knobs are made of black matte nylon PA6; the bodies are made of SUM22L or S45C; the pins are made of S45C; and the springs are made of SWP-B. Each plunger includes a lock nut. Two types are available: spring-return (ZPXSA/ZPXSK) and self-locking (ZPXRA/ZPXRK). Thread sizes are M12 and M16, with loads ranging from 7 to 24 N. Suitable for positioning and locking in automation equipment and workholding fixtures.

Knob Plunger, Extended Type

Knob Plunger, Extended Type

This series of extended-type knob plungers is suitable for positioning, indexing, locking, and similar applications. Fine threads and a locking nut help prevent loosening. The body is made of SUM303, the pin of SUS440C (hardness of at least 45 HRC), and the spring of SUS303. The knob has a black-oxide finish. Thread diameters range from 8 to 16 mm, overall lengths from 46 to 80 mm, and loads from 6.5 to 11.5 N. Eight sizes are available: 8, 8L, 10, 10L, 12, 12L, 16, and 16L.